coreutils/m4/ls-mntd-fs.m4

#serial 3

dnl From Jim Meyering.
dnl
dnl This is not pretty.  I've just taken the autoconf code and wrapped
dnl it in an AC_DEFUN.
dnl
dnl CAUTION: This is very fragile.  It relies on several checks that
dnl are still in fileutils' configure.in:
dnl FIXME: add AC_REQUIRE uses to pull in all definitions required
dnl for all uses of $ac_cv_func_* and $ac_cv_header_* variables below.
dnl

AC_PREREQ(2.14a)

AC_DEFUN(jm_LIST_MOUNTED_FILESYSTEMS,
  [
# Determine how to get the list of mounted filesystems.
list_mounted_fs=

# If the getmntent function is available but not in the standard library,
# make sure LIBS contains -lsun (on Irix4) or -lseq (on PTX).
AC_FUNC_GETMNTENT

# This test must precede the ones for getmntent because Unicos-9 is
# reported to have the getmntent function, but its support is incompatible
# with other getmntent implementations.

# NOTE: Normally, I wouldn't use a check for system type as I've done for
# `CRAY' below since that goes against the whole autoconf philosophy.  But
# I think there is too great a chance that some non-Cray system has a
# function named listmntent to risk the false positive.

if test -z "$list_mounted_fs"; then
  # Cray UNICOS 9
  AC_MSG_CHECKING([for listmntent of Cray/Unicos-9])
  AC_CACHE_VAL(fu_cv_sys_mounted_cray_listmntent,
    [fu_cv_sys_mounted_cray_listmntent=no
      AC_EGREP_CPP(yes,
        [#ifdef _CRAY
yes
#endif
        ], [test $ac_cv_func_listmntent = yes \
	    && fu_cv_sys_mounted_cray_listmntent=yes]
      )
    ]
  )
  AC_MSG_RESULT($fu_cv_sys_mounted_cray_listmntent)
  if test $fu_cv_sys_mounted_cray_listmntent = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_LISTMNTENT, 1,
      [Define if there is a function named listmntent that can be used to
   list all mounted filesystems. (UNICOS)])
  fi
fi

if test $ac_cv_func_getmntent = yes; then

  # This system has the getmntent function.
  # Determine whether it's the one-argument variant or the two-argument one.

  if test -z "$list_mounted_fs"; then
    # 4.3BSD, SunOS, HP-UX, Dynix, Irix
    AC_MSG_CHECKING([for one-argument getmntent function])
    AC_CACHE_VAL(fu_cv_sys_mounted_getmntent1,
		 [test $ac_cv_header_mntent_h = yes \
		   && fu_cv_sys_mounted_getmntent1=yes \
		   || fu_cv_sys_mounted_getmntent1=no])
    AC_MSG_RESULT($fu_cv_sys_mounted_getmntent1)
    if test $fu_cv_sys_mounted_getmntent1 = yes; then
      list_mounted_fs=found
      AC_DEFINE(MOUNTED_GETMNTENT1, 1,
  [Define if there is a function named getmntent for reading the list
   of mounted filesystems, and that function takes a single argument.
   (4.3BSD, SunOS, HP-UX, Dynix, Irix)])
    fi
  fi

  if test -z "$list_mounted_fs"; then
    # SVR4
    AC_MSG_CHECKING([for two-argument getmntent function])
    AC_CACHE_VAL(fu_cv_sys_mounted_getmntent2,
    [AC_EGREP_HEADER(getmntent, sys/mnttab.h,
      fu_cv_sys_mounted_getmntent2=yes,
      fu_cv_sys_mounted_getmntent2=no)])
    AC_MSG_RESULT($fu_cv_sys_mounted_getmntent2)
    if test $fu_cv_sys_mounted_getmntent2 = yes; then
      list_mounted_fs=found
      AC_DEFINE(MOUNTED_GETMNTENT2, 1,
  [Define if there is a function named getmntent for reading the list of
   mounted filesystems, and that function takes two arguments.  (SVR4)])
    fi
  fi

  if test -z "$list_mounted_fs"; then
    AC_MSG_ERROR([could not determine how to read list of mounted filesystems])
  fi

fi

if test -z "$list_mounted_fs"; then
  # DEC Alpha running OSF/1.
  AC_MSG_CHECKING([for getfsstat function])
  AC_CACHE_VAL(fu_cv_sys_mounted_getsstat,
  [AC_TRY_LINK([
#include <sys/types.h>
#include <sys/mount.h>
#include <sys/fs_types.h>],
  [struct statfs *stats;
  int numsys = getfsstat ((struct statfs *)0, 0L, MNT_WAIT); ],
    fu_cv_sys_mounted_getsstat=yes,
    fu_cv_sys_mounted_getsstat=no)])
  AC_MSG_RESULT($fu_cv_sys_mounted_getsstat)
  if test $fu_cv_sys_mounted_getsstat = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_GETFSSTAT, 1,
	      [Define if there is a function named getfsstat for reading the
   list of mounted filesystems.  (DEC Alpha running OSF/1)])
  fi
fi

if test -z "$list_mounted_fs"; then
  # AIX.
  AC_MSG_CHECKING([for mntctl function and struct vmount])
  AC_CACHE_VAL(fu_cv_sys_mounted_vmount,
  [AC_TRY_CPP([#include <fshelp.h>],
    fu_cv_sys_mounted_vmount=yes,
    fu_cv_sys_mounted_vmount=no)])
  AC_MSG_RESULT($fu_cv_sys_mounted_vmount)
  if test $fu_cv_sys_mounted_vmount = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_VMOUNT, 1,
	[Define if there is a function named mntctl that can be used to read
   the list of mounted filesystems, and there is a system header file
   that declares `struct vmount.'  (AIX)])
  fi
fi

if test -z "$list_mounted_fs"; then
  # SVR3
  AC_MSG_CHECKING([for FIXME existence of three headers])
  AC_CACHE_VAL(fu_cv_sys_mounted_fread_fstyp,
    [AC_TRY_CPP([
#include <sys/statfs.h>
#include <sys/fstyp.h>
#include <mnttab.h>],
		fu_cv_sys_mounted_fread_fstyp=yes,
		fu_cv_sys_mounted_fread_fstyp=no)])
  AC_MSG_RESULT($fu_cv_sys_mounted_fread_fstyp)
  if test $fu_cv_sys_mounted_fread_fstyp = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_FREAD_FSTYP, 1,
[Define if (like SVR2) there is no specific function for reading the
   list of mounted filesystems, and your system has these header files:
   <sys/fstyp.h> and <sys/statfs.h>.  (SVR3)])
  fi
fi

if test -z "$list_mounted_fs"; then
  # 4.4BSD and DEC OSF/1.
  AC_MSG_CHECKING([for getmntinfo function])
  AC_CACHE_VAL(fu_cv_sys_mounted_getmntinfo,
    [
      ok=
      if test $ac_cv_func_getmntinfo = yes; then
	AC_EGREP_HEADER(f_type;, sys/mount.h,
			ok=yes)
      fi
      test -n "$ok" \
	  && fu_cv_sys_mounted_getmntinfo=yes \
	  || fu_cv_sys_mounted_getmntinfo=no
    ])
  AC_MSG_RESULT($fu_cv_sys_mounted_getmntinfo)
  if test $fu_cv_sys_mounted_getmntinfo = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_GETMNTINFO, 1,
	      [Define if there is a function named getmntinfo for reading the
   list of mounted filesystems.  (4.4BSD)])
  fi
fi

# FIXME: add a test for netbsd-1.1 here

if test -z "$list_mounted_fs"; then
  # Ultrix
  AC_MSG_CHECKING([for getmnt function])
  AC_CACHE_VAL(fu_cv_sys_mounted_getmnt,
    [AC_TRY_CPP([
#include <sys/fs_types.h>
#include <sys/mount.h>],
		fu_cv_sys_mounted_getmnt=yes,
		fu_cv_sys_mounted_getmnt=no)])
  AC_MSG_RESULT($fu_cv_sys_mounted_getmnt)
  if test $fu_cv_sys_mounted_getmnt = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_GETMNT, 1,
      [Define if there is a function named getmnt for reading the list of
   mounted filesystems.  (Ultrix)])
  fi
fi

if test -z "$list_mounted_fs"; then
  # SVR2
  AC_MSG_CHECKING([whether it is possible to resort to fread on /etc/mnttab])
  AC_CACHE_VAL(fu_cv_sys_mounted_fread,
    [AC_TRY_CPP([#include <mnttab.h>],
		fu_cv_sys_mounted_fread=yes,
		fu_cv_sys_mounted_fread=no)])
  AC_MSG_RESULT($fu_cv_sys_mounted_fread)
  if test $fu_cv_sys_mounted_fread = yes; then
    list_mounted_fs=found
    AC_DEFINE(MOUNTED_FREAD, 1,
	      [Define if there is no specific function for reading the list of
   mounted filesystems.  fread will be used to read /etc/mnttab.  (SVR2) ])
  fi
fi

if test -z "$list_mounted_fs"; then
  AC_MSG_ERROR([could not determine how to read list of mounted filesystems])
  # FIXME -- no need to abort building the whole package
  # Can't build mountlist.c or anything that needs its functions
fi

  ])