mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-27 07:23:30 +08:00
Code Issues Packages Projects Releases Wiki Activity
f969665d8f
buildroot/board/visionfive2
History
Francois Dugast 8f48b3983c board/visionfive2: add link to documentation 
Add a link to RVspace Documentation Center, which did not exist
when readme.txt was first submitted. It provides datasheet, quick
start, schematics, and so on.

Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2023-02-12 21:49:09 +01:00
..
overlay/boot/extlinux configs/visionfive2_defconfig: new defconfig 2022-12-19 10:05:23 +01:00
genimage.cfg configs/visionfive2_defconfig: new defconfig 2022-12-19 10:05:23 +01:00
readme.txt board/visionfive2: add link to documentation 2023-02-12 21:49:09 +01:00

readme.txt 

Starfive VisionFive2
====================

The VisionFive2 is a low-cost RISC-V 64-bit based platform, powered by a
Starfive JH7110 processor.

https://doc-en.rvspace.org/Doc_Center/visionfive_2.html

How to build
============

$ make visionfive2_defconfig
$ make

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

Preparing the board
===================

Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX).

Insert your SD card.

Power-up the board using an USB-C cable.