mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-27 07:23:30 +08:00
5bfc4002ed
Switch to extlinux instead of U-Boot boot script. Drop custom boot script and genimage config. Instead use common orangepi files from board/orangepi/common. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> |
||
|---|---|---|
| .. | ||
| linux-extras.config | ||
| readme.txt | ||
pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino)
Intro
=====
This default configuration will allow you to start experimenting
with the buildroot environment for the LinkSprite pcDuino v1 board
including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the
current configuration it will bring-up the board and allow access
through the serial console as well as ethernet and wireless
network interfaces.
How to build it
===============
Configure Buildroot:
$ make linksprite_pcduino_defconfig
Modify configuration if needed, e.g. add more packages to target:
$ make menuconfig
Compile everything and build the SD card image:
$ make
How to write the SD card
========================
Once the build process is finished you will have an image
called "sdcard.img" in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
How to boot new image
=====================
Insert SD card and reset the board. By default pcDuino board
boots from SD card.