mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-30 17:03:31 +08:00
e0ee4f4152
This bumps to linux 5.14.13, linux-headers 5.14 and u-boot version 2021.10 and drop local uboot patch where CONFIG_SYS_BOOTM_LEN was set to 16MB because on u-boot 2021.10 it's now set to 64MB as default to make room for Linux images. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| extlinux.conf | ||
| genimage.cfg | ||
| linux_gmac.fragment | ||
| post-build.sh | ||
| readme.txt | ||
Vyasa RK3288 ============ Vyasa is RK3288 based Single board computer with fully supported opensource software. https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288 How to build it =============== $ make amarula_vyasa_rk3288_defconfig Then you can edit the build options using $ make menuconfig Compile all and build rootfs image: $ make Prepare your SDCard =================== Buildroot generates a ready-to-use SD card image that you can flash directly to the card. The image will be in output/images/sdcard.img. You can write this image directly to an SD card device (i.e. /dev/xxx): $ sudo dd if=output/images/sdcard.img of=/dev/xxx $ sudo sync Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.