buildroot

mirror of https://git.busybox.net/buildroot.git synced 2024-11-23 21:43:30 +08:00

History

Neal Frager 5513ded8ff configs/versal_vpk180_defconfig: new defconfig This patch adds support for Xilinx Versal VPK180 Evaluation Kit. VPK180 features can be found here: https://www.xilinx.com/products/boards-and-kits/vpk180.html Signed-off-by: Neal Frager <neal.frager@amd.com> Reviewed-by: Brandon Maier <brandon.maier@collins.com> Tested-by: Brandon Maier <brandon.maier@collins.com> Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Romain Naour <romain.naour@smile.fr>		2024-07-14 23:34:15 +02:00
..
genimage.cfg	configs/versal_vck190: new defconfig	2022-11-25 23:11:24 +01:00
post-build.sh	configs/versal_vck190_defconfig: bump to xilinx-v2023.1	2023-08-08 00:07:09 +02:00
post-image.sh	configs/versal_vck190_defconfig: bump to xilinx-v2023.1	2023-08-08 00:07:09 +02:00
readme.txt	configs/versal_vpk180_defconfig: new defconfig	2024-07-14 23:34:15 +02:00

readme.txt

This document describes the Buildroot support for the following
Xilinx Versal boards:

******************************************
Supported Versal Boards:
Xilinx VCK190 board
Xilinx VPK180 board
******************************************

Evaluation board features can be found here with the links below.

VCK190:
https://www.xilinx.com/products/boards-and-kits/vck190.html

VPK180:
https://www.xilinx.com/products/boards-and-kits/vpk180.html


How to build it
===============

Configure Buildroot:

    $ make versal_vck190_defconfig

Compile everything and build the rootfs image:

    $ make

Result of the build
-------------------

After building, you should get a tree like this:

    output/images/
    +-- boot.bin
    +-- boot.vfat
    +-- Image
    +-- rootfs.ext2
    +-- rootfs.ext4 -> rootfs.ext2
    +-- sdcard.img
    +-- system.dtb -> versal-vck190-rev1.1.dtb
    `-- versal-vck190-rev1.1.dtb

How to write the SD card
========================

WARNING! This will destroy all the card content. Use with care!

The sdcard.img file is a complete bootable image ready to be written
on the boot medium. To install it, simply copy the image to an SD
card:

    # dd if=output/images/sdcard.img of=/dev/sdX

Where 'sdX' is the device node of the SD.

Eject the SD card, insert it in the board, and power it up.