mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-27 15:33:28 +08:00
Code Issues Packages Projects Releases Wiki Activity
f6e32b6910
buildroot/Makefile
Yann E. MORIN a87abcf6da Makefile: run PPD and RPATH fixup in host-fialize 
Currently, the gdbinit is generated and installed during post install
hooks, either from the gdb package, or from the external-toolchain
package. When using per-package directories (PPD), the staging directory
of the either package is stored in the generated gdbinit, which is not
going to be valid when all the PPD staging dirs get merged into the
final staging: it would lack any library installed afterwards, i.e.
mostly everything would be missing (but the libraries from the C
toolchain in the case of an external toolchain).

Similarly, all the RPATH will point to various PPD drectories. This
does not cause any issue when the final host is aggregated, because the
PPD directories still exist when we call programs from there (e.g. from
the fs infra, or from post-image scripts).

However, we knew that would not always be possible to keep the PPD
directories: we have the prepare-sdk rule that runs a cleanup pass on
the RPATH, and also applies the generic PPD fixups.

When we introduced prepare-sdk in c32ad51cbf (core/sdk: generate the
SDK tarball ourselves), we did not yet have support for PPD for the host
directory, and especially, we did not have the host-finalize rule, which
was only introduced in d0f4f95e39 (Makefile: rework main directory
creation logic) which kick-started the introduction of PPD.

At that point, we did not realise that the rpath fixups from
prepare-sdk, would be better moved to the new host-finalize rule,
because that had no impact unless one would need an SDK.

Later, in 25e60fbe1c (Makefile: fix SDK relocation for
per-package-dirs), we eventually introduced the PPD generic fixups in
the prepare-sdk rule. Again, we did not realise that those fixups would
be better placed in the host-finalize rule rather than the prepare-sdk.

While fixing the RPATH in host-finalize is not critical, fixing up the
PPD paths actually is, as the gdbinit case demonstrate.

As such, move the PPD fixups to the host-finalize step, and while at it,
also move the RPATH fixups.

This now does not leave much to do in the prepare-sdk step, and that
could very well be moved to the host-finalize rule as well. However,
some people may have started to rely on prepare-sdk in its 6 years of
existence, and the little script it installs is not needed unless one
really needs an SDK. So leave it as it is for now.

Reported-by: Casey Reeves <casey@xogium.me>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Casey Reeves <casey@xogium.me>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Brandon Maier <Brandon.Maier@collins.com>
Tested-by: Brandon Maier <brandon.maier@collins.com>
Acked-by: TIAN Yuanhao <tianyuanhao3@163.com>
2024-09-07 21:33:49 +02:00

1280 lines
46 KiB
Makefile
Raw Blame History

# Makefile for buildroot
#
# Copyright (C) the Buildroot developers <buildroot@buildroot.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
#--------------------------------------------------------------
# Just run 'make menuconfig', configure stuff, then run 'make'.
# You shouldn't need to mess with anything beyond this point...
#--------------------------------------------------------------
# Delete default rules. We don't use them. This saves a bit of time.
.SUFFIXES:
# we want bash as shell
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi; fi)
# Set O variable if not already done on the command line;
# or avoid confusing packages that can use the O=<dir> syntax for out-of-tree
# build by preventing it from being forwarded to sub-make calls.
ifneq ("$(origin O)", "command line")
O := $(CURDIR)/output
endif
# Check if the current Buildroot execution meets all the pre-requisites.
# If they are not met, Buildroot will actually do its job in a sub-make meeting
# its pre-requisites, which are:
# 1- Permissive enough umask:
# Wrong or too restrictive umask will prevent Buildroot and packages from
# creating files and directories.
# 2- Absolute canonical CWD (i.e. $(CURDIR)):
# Otherwise, some packages will use CWD as-is, others will compute its
# absolute canonical path. This makes harder tracking and fixing host
# machine path leaks.
# 3- Absolute canonical output location (i.e. $(O)):
# For the same reason as the one for CWD.
# Remove the trailing '/.' from $(O) as it can be added by the makefile wrapper
# installed in the $(O) directory.
# Also remove the trailing '/' the user can set when on the command line.
override O := $(patsubst %/,%,$(patsubst %.,%,$(O)))
# Make sure $(O) actually exists before calling realpath on it; this is to
# avoid empty CANONICAL_O in case on non-existing entry.
CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
# gcc fails to build when the srcdir contains a '@'
ifneq ($(findstring @,$(CANONICAL_O)),)
$(error The build directory can not contain a '@')
endif
CANONICAL_CURDIR = $(realpath $(CURDIR))
REQ_UMASK = 0022
CUR_UMASK := $(shell umask)
# Make sure O= is passed (with its absolute canonical path) everywhere the
# toplevel makefile is called back.
EXTRAMAKEARGS := O=$(CANONICAL_O)
# Check Buildroot execution pre-requisites here.
ifneq ($(CUR_UMASK):$(CURDIR):$(O),$(REQ_UMASK):$(CANONICAL_CURDIR):$(CANONICAL_O))
.PHONY: _all $(MAKECMDGOALS)
$(MAKECMDGOALS): _all
@:
_all:
@umask $(REQ_UMASK) && \
$(MAKE) -C $(CANONICAL_CURDIR) --no-print-directory \
BR_ORIG_UMASK=$(CUR_UMASK) \
$(MAKECMDGOALS) $(EXTRAMAKEARGS)
else # umask / $(CURDIR) / $(O)
# This is our default rule, so must come first
all:
.PHONY: all
# Set and export the version string
export BR2_VERSION := 2024.11-git
# Actual time the release is cut (for reproducible builds)
BR2_VERSION_EPOCH = 1725627000
# Save running make version since it's clobbered by the make package
RUNNING_MAKE_VERSION := $(MAKE_VERSION)
# Check for minimal make version (note: this check will break at make 10.x)
MIN_MAKE_VERSION = 3.81
ifneq ($(firstword $(sort $(RUNNING_MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
$(error You have make '$(RUNNING_MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
endif
# absolute path
TOPDIR := $(CURDIR)
CONFIG_CONFIG_IN = Config.in
CONFIG = support/kconfig
DATE := $(shell date +%Y%m%d)
# Compute the full local version string so packages can use it as-is
# Need to export it, so it can be got from environment in children (eg. mconf)
BR2_LOCALVERSION := $(shell $(TOPDIR)/support/scripts/setlocalversion)
ifeq ($(BR2_LOCALVERSION),)
export BR2_VERSION_FULL := $(BR2_VERSION)
else
export BR2_VERSION_FULL := $(BR2_LOCALVERSION)
endif
# List of targets and target patterns for which .config doesn't need to be read in
noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
defconfig %_defconfig allyesconfig allnoconfig alldefconfig syncconfig release \
randpackageconfig allyespackageconfig allnopackageconfig \
print-version olddefconfig distclean manual manual-% check-package
# Some global targets do not trigger a build, but are used to collect
# metadata, or do various checks. When such targets are triggered,
# some packages should not do their configuration sanity
# checks. Provide them a BR_BUILDING variable set to 'y' when we're
# actually building and they should do their sanity checks.
#
# We're building in two situations: when MAKECMDGOALS is empty
# (default target is to build), or when MAKECMDGOALS contains
# something else than one of the nobuild_targets.
nobuild_targets := source %-source \
legal-info %-legal-info external-deps _external-deps \
clean distclean help show-targets graph-depends \
%-graph-depends %-show-depends %-show-version \
graph-build graph-size list-defconfigs \
savedefconfig update-defconfig printvars show-vars
ifeq ($(MAKECMDGOALS),)
BR_BUILDING = y
else ifneq ($(filter-out $(nobuild_targets),$(MAKECMDGOALS)),)
BR_BUILDING = y
endif
# We call make recursively to build packages. The command-line overrides that
# are passed to Buildroot don't apply to those package build systems. In
# particular, we don't want to pass down the O=<dir> option for out-of-tree
# builds, because the value specified on the command line will not be correct
# for packages.
MAKEOVERRIDES :=
# Include some helper macros and variables
include support/misc/utils.mk
# Set variables related to in-tree or out-of-tree build.
# Here, both $(O) and $(CURDIR) are absolute canonical paths.
ifeq ($(O),$(CURDIR)/output)
CONFIG_DIR := $(CURDIR)
NEED_WRAPPER =
else
CONFIG_DIR := $(O)
NEED_WRAPPER = y
endif
# bash prints the name of the directory on 'cd <dir>' if CDPATH is
# set, so unset it here to not cause problems. Notice that the export
# line doesn't affect the environment of $(shell ..) calls.
export CDPATH :=
BASE_DIR := $(CANONICAL_O)
$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
# Handling of BR2_EXTERNAL.
#
# The value of BR2_EXTERNAL is stored in .br-external in the output directory.
# The location of the external.mk makefile fragments is computed in that file.
# On subsequent invocations of make, this file is read in. BR2_EXTERNAL can
# still be overridden on the command line, therefore the file is re-created
# every time make is run.
BR2_EXTERNAL_FILE = $(BASE_DIR)/.br2-external.mk
-include $(BR2_EXTERNAL_FILE)
$(shell support/scripts/br2-external -d '$(BASE_DIR)' $(BR2_EXTERNAL))
BR2_EXTERNAL_ERROR =
include $(BR2_EXTERNAL_FILE)
ifneq ($(BR2_EXTERNAL_ERROR),)
$(error $(BR2_EXTERNAL_ERROR))
endif
# Workaround bug in make-4.3: https://savannah.gnu.org/bugs/?57676
$(BASE_DIR)/.br2-external.mk:;
# To make sure that the environment variable overrides the .config option,
# set this before including .config.
ifneq ($(BR2_DL_DIR),)
DL_DIR := $(BR2_DL_DIR)
endif
ifneq ($(BR2_CCACHE_DIR),)
BR_CACHE_DIR := $(BR2_CCACHE_DIR)
endif
# Need that early, before we scan packages
# Avoids doing the $(or...) everytime
BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
BUILD_DIR := $(BASE_DIR)/build
BINARIES_DIR := $(BASE_DIR)/images
BASE_TARGET_DIR := $(BASE_DIR)/target
PER_PACKAGE_DIR := $(BASE_DIR)/per-package
# initial definition so that 'make clean' works for most users, even without
# .config. HOST_DIR will be overwritten later when .config is included.
HOST_DIR := $(BASE_DIR)/host
GRAPHS_DIR := $(BASE_DIR)/graphs
LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
BR2_CONFIG = $(CONFIG_DIR)/.config
# Pull in the user's configuration file
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
-include $(BR2_CONFIG)
endif
ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),)
# Disable top-level parallel build if per-package directories is not
# used. Indeed, per-package directories is necessary to guarantee
# determinism and reproducibility with top-level parallel build.
.NOTPARALLEL:
endif
# timezone and locale may affect build output
ifeq ($(BR2_REPRODUCIBLE),y)
export TZ = UTC
export LANG = C
export LC_ALL = C
endif
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
ifeq ($(KBUILD_VERBOSE),1)
Q =
ifndef VERBOSE
VERBOSE = 1
endif
export VERBOSE
else
Q = @
endif
# kconfig uses CONFIG_SHELL
CONFIG_SHELL := $(SHELL)
export SHELL CONFIG_SHELL Q KBUILD_VERBOSE
ifndef HOSTAR
HOSTAR := ar
endif
ifndef HOSTAS
HOSTAS := as
endif
ifndef HOSTCC
HOSTCC := gcc
HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
endif
ifndef HOSTCC_NOCCACHE
HOSTCC_NOCCACHE := $(HOSTCC)
endif
ifndef HOSTCXX
HOSTCXX := g++
HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
endif
ifndef HOSTCXX_NOCCACHE
HOSTCXX_NOCCACHE := $(HOSTCXX)
endif
ifndef HOSTCPP
HOSTCPP := cpp
endif
ifndef HOSTLD
HOSTLD := ld
endif
ifndef HOSTLN
HOSTLN := ln
endif
ifndef HOSTNM
HOSTNM := nm
endif
ifndef HOSTOBJCOPY
HOSTOBJCOPY := objcopy
endif
ifndef HOSTRANLIB
HOSTRANLIB := ranlib
endif
HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
SED := $(shell which sed || type -p sed) -i -e
export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTLD
export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
# Determine the userland we are running on.
#
# Note that, despite its name, we are not interested in the actual
# architecture name. This is mostly used to determine whether some
# of the binary tools (e.g. pre-built external toolchains) can run
# on the current host. So we need to know if the userland we're
# running on can actually run those toolchains.
#
# For example, a 64-bit prebuilt toolchain will not run on a 64-bit
# kernel if the userland is 32-bit (e.g. in a chroot for example).
#
# So, we extract the first part of the tuple the host gcc was
# configured to generate code for; we assume this is our userland.
#
export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
sed -e '/^Target: \([^-]*\).*/!d' \
-e 's//\1/' \
-e 's/i.86/x86/' \
-e 's/sun4u/sparc64/' \
-e 's/arm.*/arm/' \
-e 's/sa110/arm/' \
-e 's/ppc64/powerpc64/' \
-e 's/ppc/powerpc/' \
-e 's/macppc/powerpc/' \
-e 's/sh.*/sh/' )
# When adding a new host gcc version in Config.in,
# update the HOSTCC_MAX_VERSION variable:
HOSTCC_MAX_VERSION := 11
HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
[ "$${V%% *}" -le $(HOSTCC_MAX_VERSION) ] || V=$(HOSTCC_MAX_VERSION); \
printf "%s" "$${V}")
# For gcc >= 5.x, we only need the major version.
ifneq ($(firstword $(HOSTCC_VERSION)),4)
HOSTCC_VERSION := $(firstword $(HOSTCC_VERSION))
endif
ifeq ($(BR2_NEEDS_HOST_UTF8_LOCALE),y)
# First, we try to use the user's configured locale (as that's the
# language they'd expect messages to be displayed), then we favour
# a non language-specific locale like C.UTF-8 if one is available,
# so we sort with the C locale to get it at the top.
# This is guaranteed to not be empty, because of the check in
# support/dependencies/dependencies.sh
HOST_UTF8_LOCALE := $(shell \
( echo $${LC_ALL:-$${LC_MESSAGES:-$${LANG}}}; \
locale -a 2>/dev/null | LC_ALL=C sort \
) \
| grep -i -E 'utf-?8$$' \
| head -n 1)
HOST_UTF8_LOCALE_ENV := LC_ALL=$(HOST_UTF8_LOCALE)
endif
# Make sure pkg-config doesn't look outside the buildroot tree
HOST_PKG_CONFIG_PATH := $(PKG_CONFIG_PATH)
unexport PKG_CONFIG_PATH
unexport PKG_CONFIG_SYSROOT_DIR
unexport PKG_CONFIG_LIBDIR
# Having DESTDIR set in the environment confuses the installation
# steps of some packages.
unexport DESTDIR
# Causes breakage with packages that needs host-ruby
unexport RUBYOPT
# Compilation of perl-related packages will fail otherwise
unexport PERL_MM_OPT
include package/pkg-utils.mk
include package/doc-asciidoc.mk
ifeq ($(BR2_HAVE_DOT_CONFIG),y)
################################################################################
#
# Hide troublesome environment variables from sub processes
#
################################################################################
unexport CROSS_COMPILE
unexport ARCH
unexport CC
unexport LD
unexport AR
unexport CXX
unexport CPP
unexport RANLIB
unexport CFLAGS
unexport CXXFLAGS
unexport GREP_OPTIONS
unexport TAR_OPTIONS
unexport CONFIG_SITE
unexport QMAKESPEC
unexport TERMINFO
unexport MACHINE
unexport O
unexport GCC_COLORS
unexport PLATFORM
unexport OS
unexport DEVICE_TREE
GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
PACKAGES :=
PACKAGES_ALL :=
# silent mode requested?
QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q)
# Strip off the annoying quoting
ARCH := $(call qstrip,$(BR2_ARCH))
NORMALIZED_ARCH := $(call qstrip,$(BR2_NORMALIZED_ARCH))
KERNEL_ARCH := $(call qstrip,$(BR2_NORMALIZED_ARCH))
ZCAT := $(call qstrip,$(BR2_ZCAT))
BZCAT := $(call qstrip,$(BR2_BZCAT))
XZCAT := $(call qstrip,$(BR2_XZCAT))
LZCAT := $(call qstrip,$(BR2_LZCAT))
ZSTDCAT := $(call qstrip,$(BR2_ZSTDCAT))
TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),y)
HOST_DIR = $(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/host,$(call qstrip,$(BR2_HOST_DIR)))
TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/target,$(BASE_TARGET_DIR)))
else
HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(BASE_TARGET_DIR))
endif
ifneq ($(HOST_DIR),$(BASE_DIR)/host)
HOST_DIR_SYMLINK = $(BASE_DIR)/host
$(HOST_DIR_SYMLINK): | $(BASE_DIR)
ln -snf $(HOST_DIR) $(HOST_DIR_SYMLINK)
endif
STAGING_DIR_SYMLINK = $(BASE_DIR)/staging
$(STAGING_DIR_SYMLINK): | $(BASE_DIR)
ln -snf $(STAGING_DIR) $(STAGING_DIR_SYMLINK)
# Quotes are needed for spaces and all in the original PATH content.
BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(PATH)"
# Location of a file giving a big fat warning that output/target
# should not be used as the root filesystem.
TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
ifeq ($(BR2_CCACHE),y)
CCACHE = $(HOST_DIR)/bin/ccache
BR_CACHE_DIR ?= $(call qstrip,$(BR2_CCACHE_DIR))
export BR_CACHE_DIR
HOSTCC = $(CCACHE) $(HOSTCC_NOCCACHE)
HOSTCXX = $(CCACHE) $(HOSTCXX_NOCCACHE)
export BR2_USE_CCACHE ?= 1
endif
# Scripts in support/ or post-build scripts may need to reference
# these locations, so export them so it is easier to use
export BR2_CONFIG
export BR2_REPRODUCIBLE
export TARGET_DIR
export STAGING_DIR
export HOST_DIR
export BINARIES_DIR
export BASE_DIR
################################################################################
#
# You should probably leave this stuff alone unless you know
# what you are doing.
#
################################################################################
all: world
# Include legacy before the other things, because package .mk files
# may rely on it.
include Makefile.legacy
include system/system.mk
include package/Makefile.in
# arch/arch.mk must be after package/Makefile.in because it may need to
# complement variables defined therein, like BR_NO_CHECK_HASH_FOR.
include arch/arch.mk
include support/dependencies/dependencies.mk
include $(sort $(wildcard toolchain/*.mk))
include $(sort $(wildcard toolchain/*/*.mk))
ifeq ($(BR2_REPRODUCIBLE),y)
# If SOURCE_DATE_EPOCH has not been set then use the commit date, or the last
# release date if the source tree is not within a Git repository.
# See: https://reproducible-builds.org/specs/source-date-epoch/
BR2_VERSION_GIT_EPOCH := $(shell $(GIT) log -1 --format=%at 2> /dev/null)
export SOURCE_DATE_EPOCH ?= $(or $(BR2_VERSION_GIT_EPOCH),$(BR2_VERSION_EPOCH))
endif
# Include the package override file if one has been provided in the
# configuration.
PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
ifneq ($(PACKAGE_OVERRIDE_FILE),)
-include $(PACKAGE_OVERRIDE_FILE)
endif
include $(sort $(wildcard package/*/*.mk))
include boot/common.mk
include linux/linux.mk
include fs/common.mk
# If using a br2-external tree, the BR2_EXTERNAL_$(NAME)_PATH variables
# are also present in the .config file. Since .config is included after
# we defined them in the Makefile, the values for those variables are
# quoted. We just include the generated Makefile fragment .br2-external.mk
# a third time, which will set those variables to the un-quoted values.
include $(BR2_EXTERNAL_FILE)
# Nothing to include if no BR2_EXTERNAL tree in use
include $(BR2_EXTERNAL_MKS)
# Now we are sure we have all the packages scanned and defined. We now
# check for each package in the list of enabled packages, that all its
# dependencies are indeed enabled.
#
# Only trigger the check for default builds. If the user forces building
# a package, even if not enabled in the configuration, we want to accept
# it. However; we also want to be able to force checking the dependencies
# if the user so desires. Forcing a dependency check is useful in the case
# of test-pkg, as we want to make sure during testing, that a package has
# all the dependencies selected in the config file.
#
ifeq ($(MAKECMDGOALS),)
BR_FORCE_CHECK_DEPENDENCIES = YES
endif
ifeq ($(BR_FORCE_CHECK_DEPENDENCIES),YES)
define CHECK_ONE_DEPENDENCY
ifeq ($$($(2)_TYPE),target)
ifneq ($$($$($(2)_KCONFIG_VAR)),y)
$$(error $$($(2)_NAME) is in the dependency chain of $$($(1)_NAME) that \
has added it to its _DEPENDENCIES variable without selecting it or \
depending on it from Config.in)
endif
endif
endef
$(foreach pkg,$(call UPPERCASE,$(PACKAGES)),\
$(foreach dep,$(call UPPERCASE,$($(pkg)_FINAL_ALL_DEPENDENCIES)),\
$(eval $(call CHECK_ONE_DEPENDENCY,$(pkg),$(dep))$(sep))))
endif
$(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" syncconfig
.PHONY: prepare
prepare: $(BUILD_DIR)/buildroot-config/auto.conf
@$(foreach s, $(call qstrip,$(BR2_ROOTFS_PRE_BUILD_SCRIPT)), \
$(call MESSAGE,"Executing pre-build script $(s)"); \
$(EXTRA_ENV) $(s) \
$(TARGET_DIR) \
$(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS)) \
$(call qstrip,$(BR2_ROOTFS_PRE_BUILD_SCRIPT_ARGS))$(sep))
.PHONY: world
world: target-post-image
.PHONY: prepare-sdk
prepare-sdk: world
@$(call MESSAGE,"Preparing the SDK")
$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
mkdir -p $(HOST_DIR)/share/buildroot
echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
BR2_SDK_PREFIX ?= $(GNU_TARGET_NAME)_sdk-buildroot
.PHONY: sdk
sdk: prepare-sdk $(BR2_TAR_HOST_DEPENDENCY)
@$(call MESSAGE,"Generating SDK tarball")
$(if $(BR2_SDK_PREFIX),,$(error BR2_SDK_PREFIX can not be empty))
$(Q)mkdir -p $(BINARIES_DIR)
$(TAR) czf "$(BINARIES_DIR)/$(BR2_SDK_PREFIX).tar.gz" \
--owner=0 --group=0 --numeric-owner \
--transform='s#^$(patsubst /%,%,$(HOST_DIR))#$(BR2_SDK_PREFIX)#' \
-C / $(patsubst /%,%,$(HOST_DIR))
RSYNC_VCS_EXCLUSIONS = \
--exclude .svn --exclude .git --exclude .hg --exclude .bzr \
--exclude CVS
# When stripping, obey to BR2_STRIP_EXCLUDE_DIRS and
# BR2_STRIP_EXCLUDE_FILES
STRIP_FIND_COMMON_CMD = \
find $(TARGET_DIR) \
$(if $(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)), \
\( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) \
-prune -o \
) \
$(if $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES)), \
-not \( $(call findfileclauses,$(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) )
# Regular stripping for everything, except libpthread, ld-*.so and
# kernel modules:
# - libpthread.so: a non-stripped libpthread shared library is needed for
# proper debugging of pthread programs using gdb.
# - ld.so: a non-stripped dynamic linker library is needed for valgrind
# - kernel modules (*.ko): do not function properly when stripped like normal
# applications and libraries. Normally kernel modules are already excluded
# by the executable permission check, so the explicit exclusion is only
# done for kernel modules with incorrect permissions.
STRIP_FIND_CMD = \
$(STRIP_FIND_COMMON_CMD) \
-type f \( -perm /111 -o -name '*.so*' \) \
-not \( $(call findfileclauses,libpthread*.so* ld-*.so* *.ko) \) \
-print0
# Special stripping (only debugging symbols) for libpthread and ld-*.so.
STRIP_FIND_SPECIAL_LIBS_CMD = \
$(STRIP_FIND_COMMON_CMD) \
\( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) \
-print0
# Generate locale data.
ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
GLIBC_GENERATE_LOCALES = $(call qstrip,$(BR2_GENERATE_LOCALE))
ifneq ($(GLIBC_GENERATE_LOCALES),)
PACKAGES += host-localedef
define GENERATE_GLIBC_LOCALES
+$(MAKE) -f support/misc/gen-glibc-locales.mk \
ENDIAN=$(call LOWERCASE,$(BR2_ENDIAN)) \
LOCALES="$(GLIBC_GENERATE_LOCALES)" \
Q=$(Q)
endef
TARGET_FINALIZE_HOOKS += GENERATE_GLIBC_LOCALES
endif
endif
ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
# This piece of junk does the following:
# First collect the whitelist in a file.
# Then go over all the locale dirs and for each subdir, check if it exists
# in the whitelist file. If it doesn't, kill it.
# Finally, specifically for X11, regenerate locale.dir from the whitelist.
define PURGE_LOCALES
printf '%s\n' $(LOCALE_NOPURGE) locale-archive > $(LOCALE_WHITELIST)
for dir in $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale); \
do \
if [ ! -d $$dir ]; then continue; fi; \
for langdir in $$dir/*; \
do \
if [ -e "$${langdir}" ]; \
then \
grep -qx "$${langdir##*/}" $(LOCALE_WHITELIST) || rm -rf $$langdir; \
fi \
done; \
done
if [ -d $(TARGET_DIR)/usr/share/X11/locale ]; \
then \
for lang in $(LOCALE_NOPURGE); \
do \
if [ -f $(TARGET_DIR)/usr/share/X11/locale/$$lang/XLC_LOCALE ]; \
then \
echo "$$lang/XLC_LOCALE: $$lang"; \
fi \
done > $(TARGET_DIR)/usr/share/X11/locale/locale.dir; \
fi
endef
TARGET_FINALIZE_HOOKS += PURGE_LOCALES
endif
$(TARGETS_ROOTFS): target-finalize
# Avoid the rootfs name leaking down the dependency chain
target-finalize: ROOTFS=
TARGET_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list.txt))
HOST_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-host.txt))
STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt))
.PHONY: host-finalize
host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
@$(call MESSAGE,"Finalizing host directory")
$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR),copy)
$(Q)PARALLEL_JOBS=$(PARALLEL_JOBS) \
PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
$(TOPDIR)/support/scripts/fix-rpath host
$(Q)PARALLEL_JOBS=$(PARALLEL_JOBS) \
PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
$(TOPDIR)/support/scripts/fix-rpath staging
$(call ppd-fixup-paths,$(BASE_DIR))
.PHONY: staging-finalize
staging-finalize: $(STAGING_DIR_SYMLINK)
.PHONY: target-finalize
target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
@$(call MESSAGE,"Finalizing target directory")
$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR),copy)
$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake \
$(TARGET_DIR)/usr/lib/rpm $(TARGET_DIR)/usr/doc
find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
ifneq ($(BR2_PACKAGE_GDB),y)
rm -rf $(TARGET_DIR)/usr/share/gdb
endif
ifneq ($(BR2_PACKAGE_BASH),y)
rm -rf $(TARGET_DIR)/usr/share/bash-completion
rm -rf $(TARGET_DIR)/etc/bash_completion.d
endif
ifneq ($(BR2_PACKAGE_ZSH),y)
rm -rf $(TARGET_DIR)/usr/share/zsh
endif
rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
rm -rf $(TARGET_DIR)/usr/share/gtk-doc
rmdir $(TARGET_DIR)/usr/share 2>/dev/null || true
ifneq ($(BR2_ENABLE_DEBUG):$(BR2_STRIP_strip),y:)
rm -rf $(TARGET_DIR)/lib/debug $(TARGET_DIR)/usr/lib/debug
endif
$(STRIP_FIND_CMD) | xargs -0 $(STRIPCMD) 2>/dev/null || true
$(STRIP_FIND_SPECIAL_LIBS_CMD) | xargs -0 -r $(STRIPCMD) $(STRIP_STRIP_DEBUG) 2>/dev/null || true
test -f $(TARGET_DIR)/etc/ld.so.conf && \
{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
test -d $(TARGET_DIR)/etc/ld.so.conf.d && \
{ echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
mkdir -p $(TARGET_DIR)/etc
( \
echo "NAME=Buildroot"; \
echo "VERSION=$(BR2_VERSION_FULL)"; \
echo "ID=buildroot"; \
echo "VERSION_ID=$(BR2_VERSION)"; \
echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
) > $(TARGET_DIR)/usr/lib/os-release
ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc
@$(call MESSAGE,"Sanitizing RPATH in target tree")
PARALLEL_JOBS=$(PARALLEL_JOBS) \
PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) \
$(TOPDIR)/support/scripts/fix-rpath target
# For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
# counterparts are appropriately setup as symlinks ones to the others.
ifeq ($(BR2_ROOTFS_MERGED_USR),y)
$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
@$(call MESSAGE,"Sanity check in overlay $(d)")$(sep) \
$(Q)not_merged_dirs="$$(support/scripts/check-merged-usr.sh $(d))"; \
test -n "$$not_merged_dirs" && { \
echo "ERROR: The overlay in $(d) is not" \
"using a merged /usr for the following directories:" \
$$not_merged_dirs; \
exit 1; \
} || true$(sep))
endif # merged /usr
$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
@$(call MESSAGE,"Copying overlay $(d)")$(sep) \
$(Q)$(call SYSTEM_RSYNC,$(d),$(TARGET_DIR))$(sep))
$(Q)$(if $(TARGET_DIR_FILES_LISTS), \
cat $(TARGET_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list.txt
$(Q)$(if $(HOST_DIR_FILES_LISTS), \
cat $(HOST_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-host.txt
$(Q)$(if $(STAGING_DIR_FILES_LISTS), \
cat $(STAGING_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-staging.txt
$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
@$(call MESSAGE,"Executing post-build script $(s)")$(sep) \
$(Q)$(EXTRA_ENV) $(s) \
$(TARGET_DIR) \
$(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS)) \
$(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT_ARGS))$(sep))
touch $(TARGET_DIR)/usr
# Note: this will run in the filesystem context, so will use a copy
# of target/, not the real one, so the files are still available on
# re-builds (foo-rebuild, etc...)
define ROOTFS_RM_HWDB_DATA
rm -rf $(TARGET_DIR)/usr/lib/udev/hwdb.d/ $(TARGET_DIR)/etc/udev/hwdb.d/
endef
ROOTFS_PRE_CMD_HOOKS += ROOTFS_RM_HWDB_DATA
.PHONY: target-post-image
target-post-image: $(TARGETS_ROOTFS) target-finalize staging-finalize
@rm -f $(ROOTFS_COMMON_TAR)
$(Q)mkdir -p $(BINARIES_DIR)
@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
$(call MESSAGE,"Executing post-image script $(s)"); \
$(EXTRA_ENV) $(s) \
$(BINARIES_DIR) \
$(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS)) \
$(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS))$(sep))
.PHONY: source
source: $(foreach p,$(PACKAGES),$(p)-all-source)
.PHONY: _external-deps external-deps
_external-deps: $(foreach p,$(PACKAGES),$(p)-all-external-deps)
external-deps:
@$(MAKE1) -Bs $(EXTRAMAKEARGS) _external-deps | sort -u
.PHONY: legal-info-clean
legal-info-clean:
@rm -fr $(LEGAL_INFO_DIR)
.PHONY: legal-info-prepare
legal-info-prepare: $(LEGAL_INFO_DIR)
@$(call MESSAGE,"Buildroot $(BR2_VERSION_FULL) Collecting legal info")
@$(call legal-license-file,HOST,buildroot,buildroot,COPYING,COPYING,support/legal-info/buildroot.hash)
@$(call legal-manifest,TARGET,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
@$(call legal-manifest,HOST,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,DEPENDENCIES WITH LICENSES)
@$(call legal-manifest,HOST,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved)
@$(call legal-warning,the Buildroot source code has not been saved)
@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
.PHONY: legal-info
legal-info: legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p)-all-legal-info) \
$(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
@cat support/legal-info/README.header >>$(LEGAL_REPORT)
@if [ -r $(LEGAL_WARNINGS) ]; then \
cat support/legal-info/README.warnings-header \
$(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
cat $(LEGAL_WARNINGS); fi
@rm -f $(LEGAL_WARNINGS)
@(cd $(LEGAL_INFO_DIR); \
find * -type f -exec sha256sum {} + | LC_ALL=C sort -k2 \
>.legal-info.sha256; \
mv .legal-info.sha256 legal-info.sha256)
@echo "Legal info produced in $(LEGAL_INFO_DIR)"
.PHONY: show-targets
show-targets:
@echo $(sort $(PACKAGES)) $(sort $(TARGETS_ROOTFS))
.PHONY: show-build-order
show-build-order: $(patsubst %,%-show-build-order,$(PACKAGES))
.PHONY: graph-build
graph-build: $(O)/build/build-time.log
@install -d $(GRAPHS_DIR)
$(foreach o,name build duration,./support/scripts/graph-build-time \
--type=histogram --order=$(o) --input=$(<) \
--output=$(GRAPHS_DIR)/build.hist-$(o).$(BR_GRAPH_OUT) \
$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
$(foreach t,packages steps,./support/scripts/graph-build-time \
--type=pie-$(t) --input=$(<) \
--output=$(GRAPHS_DIR)/build.pie-$(t).$(BR_GRAPH_OUT) \
$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
./support/scripts/graph-build-time --type=timeline --input=$(<) \
--output=$(GRAPHS_DIR)/build.timeline.$(BR_GRAPH_OUT) \
$(if $(BR2_GRAPH_ALT),--alternate-colors)
.PHONY: graph-depends-requirements
graph-depends-requirements:
@dot -? >/dev/null 2>&1 || \
{ echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
.PHONY: graph-depends
graph-depends: graph-depends-requirements
@$(INSTALL) -d $(GRAPHS_DIR)
@cd "$(CONFIG_DIR)"; \
$(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
--direct -o $(GRAPHS_DIR)/$(@).dot
dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) \
-o $(GRAPHS_DIR)/$(@).$(BR_GRAPH_OUT) \
$(GRAPHS_DIR)/$(@).dot
.PHONY: graph-size
graph-size:
$(Q)mkdir -p $(GRAPHS_DIR)
$(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
--graph $(GRAPHS_DIR)/graph-size.$(BR_GRAPH_OUT) \
--file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv \
$(BR2_GRAPH_SIZE_OPTS)
.PHONY: check-dependencies
check-dependencies:
@cd "$(CONFIG_DIR)"; \
$(TOPDIR)/support/scripts/graph-depends -C
.PHONY: show-info
show-info:
@:
$(info $(call clean-json, \
{ $(foreach p, \
$(sort $(foreach i,$(PACKAGES) $(TARGETS_ROOTFS), \
$(i) \
$($(call UPPERCASE,$(i))_FINAL_RECURSIVE_DEPENDENCIES) \
) \
), \
$(call json-info,$(call UPPERCASE,$(p)))$(comma) \
) } \
) \
)
.PHONY: pkg-stats
pkg-stats:
@cd "$(CONFIG_DIR)" ; \
$(TOPDIR)/support/scripts/pkg-stats -c \
--json $(O)/pkg-stats.json \
--html $(O)/pkg-stats.html \
--nvd-path $(DL_DIR)/buildroot-nvd
else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
# Some subdirectories are also package names. To avoid that "make linux"
# on an unconfigured tree produces "Nothing to be done", add an explicit
# rule for it.
# Also for 'all' we error out and ask the user to configure first.
.PHONY: linux toolchain
linux toolchain all: outputmakefile
$(error Please configure Buildroot first (e.g. "make menuconfig"))
@exit 1
endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
# configuration
# ---------------------------------------------------------------------------
HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
export HOSTCFLAGS
$(BUILD_DIR)/buildroot-config/%onf:
mkdir -p $(@D)/lxdialog
PKG_CONFIG_PATH="$(HOST_PKG_CONFIG_PATH)" $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" \
obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
# We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
# recognize that if it's still at its default $(CONFIG_DIR)/defconfig
COMMON_CONFIG_ENV = \
BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
BR2_CONFIG=$(BR2_CONFIG) \
HOST_GCC_VERSION="$(HOSTCC_VERSION)" \
BASE_DIR=$(BASE_DIR) \
SKIP_LEGACY=
xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
# For the config targets that automatically select options, we pass
# SKIP_LEGACY=y to disable the legacy options. However, in that case
# no values are set for the legacy options so a subsequent oldconfig
# will query them. Therefore, run an additional olddefconfig.
randconfig allyesconfig alldefconfig allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --$@ $(CONFIG_CONFIG_IN)
@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
randpackageconfig allyespackageconfig allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
@$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
$< --$(subst package,,$@) $(CONFIG_CONFIG_IN)
@rm -f $(CONFIG_DIR)/.config.nopkg
@$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
oldconfig syncconfig olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@$(COMMON_CONFIG_ENV) $< --$@ $(CONFIG_CONFIG_IN)
defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
%_defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@defconfig=$(or \
$(firstword \
$(foreach d, \
$(call reverse,$(TOPDIR) $(BR2_EXTERNAL_DIRS)), \
$(wildcard $(d)/configs/$@) \
) \
), \
$(error "Can't find $@") \
); \
$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$${defconfig} \
$< --defconfig=$${defconfig} $(CONFIG_CONFIG_IN)
update-defconfig: savedefconfig
savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
@$(COMMON_CONFIG_ENV) $< \
--savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
$(CONFIG_CONFIG_IN)
@$(SED) '/^BR2_DEFCONFIG=/d' $(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig)
.PHONY: defconfig savedefconfig update-defconfig
################################################################################
#
# Cleanup and misc junk
#
################################################################################
# staging and target directories do NOT list these as
# dependencies anywhere else
$(BASE_DIR) $(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST) $(PER_PACKAGE_DIR):
@mkdir -p $@
# outputmakefile generates a Makefile in the output directory, if using a
# separate output directory. This allows convenient use of make in the
# output directory.
.PHONY: outputmakefile
outputmakefile:
ifeq ($(NEED_WRAPPER),y)
$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
endif
# printvars prints all the variables currently defined in our
# Makefiles. Alternatively, if a non-empty VARS variable is passed,
# only the variables matching the make pattern passed in VARS are
# displayed.
# show-vars does the same, but as a JSON dictionnary.
#
# Note: we iterate of .VARIABLES and filter each variable individually,
# to workaround a bug in make 4.3; see https://savannah.gnu.org/bugs/?59093
.PHONY: printvars
printvars:
ifndef VARS
$(error Please pass a non-empty VARS to 'make printvars')
endif
@:
$(foreach V, \
$(sort $(foreach X, $(.VARIABLES), $(filter $(VARS),$(X)))), \
$(if $(filter-out environment% default automatic, \
$(origin $V)), \
$(if $(QUOTED_VARS),\
$(info $V='$(subst ','\'',$(if $(RAW_VARS),$(value $V),$($V)))'), \
$(info $V=$(if $(RAW_VARS),$(value $V),$($V))))))
# ')))) # Syntax colouring...
# See details above, same as for printvars
.PHONY: show-vars
show-vars: VARS?=%
show-vars:
@:
$(foreach i, \
$(call clean-json, { \
$(foreach V, \
$(.VARIABLES), \
$(and $(filter $(VARS),$(V)) \
, \
$(filter-out environment% default automatic, $(origin $V)) \
, \
"$V": { \
"expanded": $(call mk-json-str,$($V))$(comma) \
"raw": $(call mk-json-str,$(value $V)) \
}$(comma) \
) \
) \
} ) \
, \
$(info $(i)) \
)
.PHONY: clean
clean:
rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
$(BUILD_DIR) $(BASE_DIR)/staging \
$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR) $(O)/pkg-stats.*
.PHONY: distclean
distclean: clean
ifeq ($(O),$(CURDIR)/output)
rm -rf $(O)
endif
rm -rf $(TOPDIR)/dl $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
$(CONFIG_DIR)/.auto.deps $(BASE_DIR)/.br2-external.*
.PHONY: help
help:
@echo 'Cleaning:'
@echo ' clean - delete all files created by build'
@echo ' distclean - delete all non-source files (including .config)'
@echo
@echo 'Build:'
@echo ' all - make world'
@echo ' toolchain - build toolchain'
@echo ' sdk - build relocatable SDK'
@echo
@echo 'Configuration:'
@echo ' menuconfig - interactive curses-based configurator'
@echo ' nconfig - interactive ncurses-based configurator'
@echo ' xconfig - interactive Qt-based configurator'
@echo ' gconfig - interactive GTK-based configurator'
@echo ' oldconfig - resolve any unresolved symbols in .config'
@echo ' syncconfig - Same as oldconfig, but quietly, additionally update deps'
@echo ' olddefconfig - Same as syncconfig but sets new symbols to their default value'
@echo ' randconfig - New config with random answer to all options'
@echo ' defconfig - New config with default answer to all options;'
@echo ' BR2_DEFCONFIG, if set on the command line, is used as input'
@echo ' savedefconfig - Save current config to BR2_DEFCONFIG (minimal config)'
@echo ' update-defconfig - Same as savedefconfig'
@echo ' allyesconfig - New config where all options are accepted with yes'
@echo ' allnoconfig - New config where all options are answered with no'
@echo ' alldefconfig - New config where all options are set to default'
@echo ' randpackageconfig - New config with random answer to package options'
@echo ' allyespackageconfig - New config where pkg options are accepted with yes'
@echo ' allnopackageconfig - New config where package options are answered with no'
@echo
@echo 'Package-specific:'
@echo ' <pkg> - Build and install <pkg> and all its dependencies'
@echo ' <pkg>-source - Only download the source files for <pkg>'
@echo ' <pkg>-extract - Extract <pkg> sources'
@echo ' <pkg>-patch - Apply patches to <pkg>'
@echo ' <pkg>-depends - Build <pkg>'\''s dependencies'
@echo ' <pkg>-configure - Build <pkg> up to the configure step'
@echo ' <pkg>-build - Build <pkg> up to the build step'
@echo ' <pkg>-show-info - generate info about <pkg>, as a JSON blurb'
@echo ' <pkg>-show-depends - List packages on which <pkg> depends'
@echo ' <pkg>-show-rdepends - List packages which have <pkg> as a dependency'
@echo ' <pkg>-show-recursive-depends'
@echo ' - Recursively list packages on which <pkg> depends'
@echo ' <pkg>-show-recursive-rdepends'
@echo ' - Recursively list packages which have <pkg> as a dependency'
@echo ' <pkg>-graph-depends - Generate a graph of <pkg>'\''s dependencies'
@echo ' <pkg>-graph-rdepends - Generate a graph of <pkg>'\''s reverse dependencies'
@echo ' <pkg>-graph-both-depends'
@echo ' - Generate a graph of both <pkg>'\''s forward and'
@echo ' reverse dependencies.'
@echo ' <pkg>-dirclean - Remove <pkg> build directory'
@echo ' <pkg>-reconfigure - Restart the build from the configure step'
@echo ' <pkg>-rebuild - Restart the build from the build step'
@echo ' <pkg>-reinstall - Restart the build from the install step'
$(foreach p,$(HELP_PACKAGES), \
@echo $(sep) \
@echo '$($(p)_NAME):' $(sep) \
$($(p)_HELP_CMDS)$(sep))
@echo
@echo 'Documentation:'
@echo ' manual - build manual in all formats'
@echo ' manual-html - build manual in HTML'
@echo ' manual-split-html - build manual in split HTML'
@echo ' manual-pdf - build manual in PDF'
@echo ' manual-text - build manual in text'
@echo ' manual-epub - build manual in ePub'
@echo ' graph-build - generate graphs of the build times'
@echo ' graph-depends - generate graph of the dependency tree'
@echo ' graph-size - generate stats of the filesystem size'
@echo ' list-defconfigs - list all defconfigs (pre-configured minimal systems)'
@echo
@echo 'Miscellaneous:'
@echo ' source - download all sources needed for offline-build'
@echo ' external-deps - list external packages used'
@echo ' legal-info - generate info about license compliance'
@echo ' show-info - generate info about packages, as a JSON blurb'
@echo ' pkg-stats - generate info about packages as JSON and HTML'
@echo ' printvars - dump internal variables selected with VARS=...'
@echo ' show-vars - dump all internal variables as a JSON blurb; use VARS=...'
@echo ' to limit the list to variables names matching that pattern'
@echo
@echo ' make V=0|1 - 0 => quiet build (default), 1 => verbose build'
@echo ' make O=dir - Locate all output files in "dir", including .config'
@echo
@echo 'For further details, see README, generate the Buildroot manual, or consult'
@echo 'it on-line at http://buildroot.org/docs.html'
@echo
# List the defconfig files
# $(1): base directory
# $(2): br2-external name, empty for bundled
define list-defconfigs
@first=true; \
for defconfig in $(1)/configs/*_defconfig; do \
[ -f "$${defconfig}" ] || continue; \
if $${first}; then \
if [ "$(2)" ]; then \
printf 'External configs in "$(call qstrip,$(2))":\n'; \
else \
printf "Built-in configs:\n"; \
fi; \
first=false; \
fi; \
defconfig="$${defconfig##*/}"; \
printf " %-35s - Build for %s\n" "$${defconfig}" "$${defconfig%_defconfig}"; \
done; \
$${first} || printf "\n"
endef
# We iterate over BR2_EXTERNAL_NAMES rather than BR2_EXTERNAL_DIRS,
# because we want to display the name of the br2-external tree.
.PHONY: list-defconfigs
list-defconfigs:
$(call list-defconfigs,$(TOPDIR))
$(foreach name,$(BR2_EXTERNAL_NAMES),\
$(call list-defconfigs,$(BR2_EXTERNAL_$(name)_PATH),\
$(BR2_EXTERNAL_$(name)_DESC))$(sep))
release: OUT = buildroot-$(BR2_VERSION)
# Create release tarballs. We need to fiddle a bit to add the generated
# documentation to the git output
release:
git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
$(MAKE) O=$(OUT) distclean
tar rf $(OUT).tar $(OUT)
gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
xz -9 -c < $(OUT).tar > $(OUT).tar.xz
rm -rf $(OUT) $(OUT).tar
print-version:
@echo $(BR2_VERSION_FULL)
check-package:
$(Q)./utils/check-package `git ls-tree -r --name-only HEAD` \
--ignore-list=$(TOPDIR)/.checkpackageignore
.PHONY: .checkpackageignore
.checkpackageignore:
$(Q)./utils/check-package --failed-only `git ls-tree -r --name-only HEAD` \
> .checkpackageignore
include docs/manual/manual.mk
-include $(foreach dir,$(BR2_EXTERNAL_DIRS),$(sort $(wildcard $(dir)/docs/*/*.mk)))
.PHONY: $(noconfig_targets)
# .WAIT was introduced in make 4.4. For older make, define it as phony.
.PHONY: .WAIT
endif #umask / $(CURDIR) / $(O)
Reference in New Issue View Git Blame Copy Permalink