mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-30 17:03:31 +08:00
Code Issues Packages Projects Releases Wiki Activity
e87365ffb4
buildroot/package/Makefile.in
Yann E. MORIN f77d698f83 support/scripts/apply-patches: use appropriate TAR 
Note that here, it is in fact not really relevant. We only extract a
tarball, and we don't use any "modern" or GNU-only options like
--strip-components. However, for consistency it's better to use the same
tar everywhere.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Maier, Brandon L Collins" <Brandon.Maier@collins.com>
Reviewed-by: brandon.maier@collins.com
[Arnout: quote TAR="..."]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
2024-06-05 23:47:56 +02:00

443 lines
14 KiB
Makefile
Raw Blame History

ifndef MAKE
MAKE := make
endif
ifndef HOSTMAKE
HOSTMAKE = $(MAKE)
endif
HOSTMAKE := $(shell which $(HOSTMAKE) || type -p $(HOSTMAKE) || echo make)
# If BR2_JLEVEL is 0, scale the maximum concurrency with the number of
# CPUs. An additional job is used in order to keep processors busy
# while waiting on I/O.
# If the number of processors is not available, assume one.
ifeq ($(BR2_JLEVEL),0)
PARALLEL_JOBS := $(shell echo \
$$((1 + `getconf _NPROCESSORS_ONLN 2>/dev/null || echo 1`)))
else
PARALLEL_JOBS := $(BR2_JLEVEL)
endif
# Only build one job at a time, *and* to not randomise goals and
# prerequisites ordering in make 4.4+
MAKE1 := $(HOSTMAKE) -j1 $(if $(findstring --shuffle,$(MAKEFLAGS)),--shuffle=none)
override MAKE = $(HOSTMAKE) \
$(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS))
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
TARGET_VENDOR = $(call qstrip,$(BR2_TOOLCHAIN_BUILDROOT_VENDOR))
else
TARGET_VENDOR = buildroot
endif
# Sanity checks
ifeq ($(TARGET_VENDOR),)
$(error BR2_TOOLCHAIN_BUILDROOT_VENDOR is not allowed to be empty)
endif
ifeq ($(TARGET_VENDOR),unknown)
$(error BR2_TOOLCHAIN_BUILDROOT_VENDOR cannot be 'unknown'. \
It might be confused with the native toolchain)
endif
# Compute GNU_TARGET_NAME
GNU_TARGET_NAME = $(ARCH)-$(TARGET_VENDOR)-$(TARGET_OS)-$(LIBC)$(ABI)
# FLAT binary format needs uclinux, except RISC-V which needs the
# regular linux name.
ifeq ($(BR2_BINFMT_FLAT):$(BR2_riscv),y:)
TARGET_OS = uclinux
else
TARGET_OS = linux
endif
ifeq ($(BR2_TOOLCHAIN_USES_UCLIBC),y)
LIBC = uclibc
else ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y)
LIBC = musl
else ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
LIBC = gnu
else ifeq ($(BR_BUILDING),y)
# This happens if there is a bug in Buildroot that allows an
# architecture configuration that isn't supported by any library.
$(error No C library enabled, this is not possible.)
endif
# The ABI suffix is a bit special on ARM, as it needs to be
# -uclibcgnueabi for uClibc EABI, and -gnueabi for glibc EABI.
# This means that the LIBC and ABI aren't strictly orthogonal,
# which explains why we need the test on LIBC below.
ifeq ($(BR2_arm)$(BR2_armeb),y)
ifeq ($(LIBC),uclibc)
ABI = gnueabi
else
ABI = eabi
endif
ifeq ($(BR2_ARM_EABIHF),y)
ABI := $(ABI)hf
endif
endif
# For FSL PowerPC there's SPE
ifeq ($(BR2_POWERPC_CPU_HAS_SPE),y)
ABI = spe
# MPC8540s are e500v1 with single precision FP
ifeq ($(BR2_powerpc_8540),y)
TARGET_ABI += -mabi=spe -mfloat-gprs=single -Wa,-me500
endif
ifeq ($(BR2_powerpc_8548),y)
TARGET_ABI += -mabi=spe -mfloat-gprs=double -Wa,-me500x2
endif
ifeq ($(BR2_powerpc_e500mc),y)
TARGET_ABI += -mabi=spe -mfloat-gprs=double -Wa,-me500mc
endif
endif
# Use longcalls option for Xtensa globally.
# The 'longcalls' option allows calls across a greater range of addresses,
# and is required for some packages. While this option can degrade both
# code size and performance, the linker can usually optimize away the
# overhead when a call ends up within a certain range.
#
# Use auto-litpools for Xtensa globally.
# Collecting literals into separate section can be advantageous if that
# section is placed into DTCM at link time. This is applicable for code
# running on bare metal, but makes no sense under linux, where userspace
# is isolated from the physical memory details. OTOH placing literals into
# separate section breaks build of huge source files, because l32r
# instruction can only access literals in 256 KBytes range.
#
ifeq ($(BR2_xtensa),y)
TARGET_ABI += -mlongcalls -mauto-litpools
endif
STAGING_SUBDIR = $(GNU_TARGET_NAME)/sysroot
STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR)
ifeq ($(BR2_OPTIMIZE_0),y)
TARGET_OPTIMIZATION = -O0
endif
ifeq ($(BR2_OPTIMIZE_1),y)
TARGET_OPTIMIZATION = -O1
endif
ifeq ($(BR2_OPTIMIZE_2),y)
TARGET_OPTIMIZATION = -O2
endif
ifeq ($(BR2_OPTIMIZE_3),y)
TARGET_OPTIMIZATION = -O3
endif
ifeq ($(BR2_OPTIMIZE_G),y)
TARGET_OPTIMIZATION = -Og
endif
ifeq ($(BR2_OPTIMIZE_S),y)
TARGET_OPTIMIZATION = -Os
endif
ifeq ($(BR2_OPTIMIZE_FAST),y)
TARGET_OPTIMIZATION = -Ofast
endif
ifeq ($(BR2_ENABLE_DEBUG),)
TARGET_DEBUGGING = -g0
endif
ifeq ($(BR2_DEBUG_1),y)
TARGET_DEBUGGING = -g1
endif
ifeq ($(BR2_DEBUG_2),y)
TARGET_DEBUGGING = -g2
endif
ifeq ($(BR2_DEBUG_3),y)
TARGET_DEBUGGING = -g3
endif
TARGET_LDFLAGS = $(call qstrip,$(BR2_TARGET_LDFLAGS))
# By design, _FORTIFY_SOURCE requires gcc optimization to be enabled.
# Therefore, we need to pass _FORTIFY_SOURCE and the optimization level
# through the same mechanism, i.e currently through CFLAGS. Passing
# _FORTIFY_SOURCE through the wrapper and the optimization level
# through CFLAGS would not work, because CFLAGS are sometimes
# ignored/overridden by packages, but the flags passed by the wrapper
# are enforced: this would cause _FORTIFY_SOURCE to be used without any
# optimization level, leading to a build / configure failure. So we keep
# passing _FORTIFY_SOURCE and the optimization level both through CFLAGS.
ifeq ($(BR2_FORTIFY_SOURCE_1),y)
TARGET_HARDENED += -D_FORTIFY_SOURCE=1
else ifeq ($(BR2_FORTIFY_SOURCE_2),y)
TARGET_HARDENED += -D_FORTIFY_SOURCE=2
else ifeq ($(BR2_FORTIFY_SOURCE_3),y)
TARGET_HARDENED += -D_FORTIFY_SOURCE=3
endif
TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
ifeq ($(BR2_TIME_BITS_64),y)
TARGET_CPPFLAGS += -D_TIME_BITS=64
endif
TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) $(TARGET_HARDENED)
TARGET_CXXFLAGS = $(TARGET_CFLAGS)
TARGET_FCFLAGS = $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING)
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79509
ifeq ($(BR2_m68k_cf),y)
TARGET_CFLAGS += -fno-dwarf2-cfi-asm
TARGET_CXXFLAGS += -fno-dwarf2-cfi-asm
endif
ifeq ($(BR2_BINFMT_FLAT),y)
ifeq ($(BR2_riscv),y)
TARGET_CFLAGS += -fPIC
endif
ELF2FLT_FLAGS = $(if $($(PKG)_FLAT_STACKSIZE),\
-Wl$(comma)-elf2flt="-r -s$($(PKG)_FLAT_STACKSIZE)",\
-Wl$(comma)-elf2flt=-r)
TARGET_CFLAGS += $(ELF2FLT_FLAGS)
TARGET_CXXFLAGS += $(ELF2FLT_FLAGS)
TARGET_FCFLAGS += $(ELF2FLT_FLAGS)
TARGET_LDFLAGS += $(ELF2FLT_FLAGS)
endif
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
TARGET_CROSS = $(HOST_DIR)/bin/$(GNU_TARGET_NAME)-
else
TARGET_CROSS = $(HOST_DIR)/bin/$(TOOLCHAIN_EXTERNAL_PREFIX)-
endif
# gcc-4.7 and later ships with wrappers that will automatically pass
# arguments to the binutils tools. Those are paths to necessary linker
# plugins.
ifeq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_4_7),y)
TARGET_GCC_WRAPPERS_PREFIX = gcc-
endif
# Define TARGET_xx variables for all common binutils/gcc
TARGET_AR = $(TARGET_CROSS)$(TARGET_GCC_WRAPPERS_PREFIX)ar
TARGET_AS = $(TARGET_CROSS)as
TARGET_CC = $(TARGET_CROSS)gcc
TARGET_CPP = $(TARGET_CROSS)cpp
TARGET_CXX = $(TARGET_CROSS)g++
TARGET_FC = $(TARGET_CROSS)gfortran
TARGET_LD = $(TARGET_CROSS)ld
TARGET_NM = $(TARGET_CROSS)$(TARGET_GCC_WRAPPERS_PREFIX)nm
TARGET_RANLIB = $(TARGET_CROSS)$(TARGET_GCC_WRAPPERS_PREFIX)ranlib
TARGET_READELF = $(TARGET_CROSS)readelf
TARGET_OBJCOPY = $(TARGET_CROSS)objcopy
TARGET_OBJDUMP = $(TARGET_CROSS)objdump
ifeq ($(BR2_STRIP_strip),y)
STRIP_STRIP_DEBUG := --strip-debug
TARGET_STRIP = $(TARGET_CROSS)strip
STRIPCMD = $(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note
else
TARGET_STRIP = /bin/true
STRIPCMD = $(TARGET_STRIP)
endif
INSTALL := $(shell which install || type -p install)
UNZIP := $(shell which unzip || type -p unzip) -q
APPLY_PATCHES = TAR="$(TAR)" PATH=$(HOST_DIR)/bin:$$PATH support/scripts/apply-patches.sh $(if $(QUIET),-s)
HOST_CPPFLAGS = -I$(HOST_DIR)/include
HOST_CFLAGS ?= -O2
HOST_CFLAGS += $(HOST_CPPFLAGS)
HOST_CXXFLAGS += $(HOST_CFLAGS)
HOST_LDFLAGS += -L$(HOST_DIR)/lib -Wl,-rpath,$(HOST_DIR)/lib
# host-intltool should be executed with the system perl, so we save
# the path to the system perl, before a host-perl built by Buildroot
# might get installed into $(HOST_DIR)/bin and therefore appears
# in our PATH. This system perl will be used as INTLTOOL_PERL.
export PERL=$(shell which perl)
# host-intltool needs libxml-parser-perl, which Buildroot installs in
# $(HOST_DIR)/lib/perl, so we must make sure that the system perl
# finds this perl module by exporting the proper value for PERL5LIB.
export PERL5LIB=$(HOST_DIR)/lib/perl
TARGET_MAKE_ENV = \
GIT_DIR=. \
PATH=$(BR_PATH)
TARGET_CONFIGURE_OPTS = \
$(TARGET_MAKE_ENV) \
AR="$(TARGET_AR)" \
AS="$(TARGET_AS)" \
LD="$(TARGET_LD)" \
NM="$(TARGET_NM)" \
CC="$(TARGET_CC)" \
GCC="$(TARGET_CC)" \
CPP="$(TARGET_CPP)" \
CXX="$(TARGET_CXX)" \
FC="$(TARGET_FC)" \
F77="$(TARGET_FC)" \
RANLIB="$(TARGET_RANLIB)" \
READELF="$(TARGET_READELF)" \
STRIP="$(TARGET_STRIP)" \
OBJCOPY="$(TARGET_OBJCOPY)" \
OBJDUMP="$(TARGET_OBJDUMP)" \
AR_FOR_BUILD="$(HOSTAR)" \
AS_FOR_BUILD="$(HOSTAS)" \
CC_FOR_BUILD="$(HOSTCC)" \
GCC_FOR_BUILD="$(HOSTCC)" \
CXX_FOR_BUILD="$(HOSTCXX)" \
LD_FOR_BUILD="$(HOSTLD)" \
CPPFLAGS_FOR_BUILD="$(HOST_CPPFLAGS)" \
CFLAGS_FOR_BUILD="$(HOST_CFLAGS)" \
CXXFLAGS_FOR_BUILD="$(HOST_CXXFLAGS)" \
LDFLAGS_FOR_BUILD="$(HOST_LDFLAGS)" \
FCFLAGS_FOR_BUILD="$(HOST_FCFLAGS)" \
DEFAULT_ASSEMBLER="$(TARGET_AS)" \
DEFAULT_LINKER="$(TARGET_LD)" \
CPPFLAGS="$(TARGET_CPPFLAGS)" \
CFLAGS="$(TARGET_CFLAGS)" \
CXXFLAGS="$(TARGET_CXXFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
FCFLAGS="$(TARGET_FCFLAGS)" \
FFLAGS="$(TARGET_FCFLAGS)" \
PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
STAGING_DIR="$(STAGING_DIR)" \
INTLTOOL_PERL=$(PERL)
HOST_MAKE_ENV = \
GIT_DIR=. \
PATH=$(BR_PATH) \
PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \
PKG_CONFIG_SYSROOT_DIR="/" \
PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \
PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig"
HOST_CONFIGURE_OPTS = \
$(HOST_MAKE_ENV) \
AR="$(HOSTAR)" \
AS="$(HOSTAS)" \
LD="$(HOSTLD)" \
NM="$(HOSTNM)" \
CC="$(HOSTCC)" \
GCC="$(HOSTCC)" \
CXX="$(HOSTCXX)" \
CPP="$(HOSTCPP)" \
OBJCOPY="$(HOSTOBJCOPY)" \
RANLIB="$(HOSTRANLIB)" \
CPPFLAGS="$(HOST_CPPFLAGS)" \
CFLAGS="$(HOST_CFLAGS)" \
CXXFLAGS="$(HOST_CXXFLAGS)" \
LDFLAGS="$(HOST_LDFLAGS)" \
INTLTOOL_PERL=$(PERL)
# This is extra environment we can not export ourselves (eg. because some
# packages use that variable internally, eg. uboot), so we have to
# explicitly pass it to user-supplied external hooks (eg. post-build,
# post-images)
EXTRA_ENV = \
PATH=$(BR_PATH) \
BR2_DL_DIR=$(BR2_DL_DIR) \
BUILD_DIR=$(BUILD_DIR) \
CONFIG_DIR=$(CONFIG_DIR) \
O=$(CANONICAL_O)
################################################################################
# settings we need to pass to configure
# does unaligned access trap?
BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=yes
ifeq ($(BR2_i386),y)
BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no
endif
ifeq ($(BR2_x86_64),y)
BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no
endif
ifeq ($(BR2_m68k),y)
BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no
endif
ifeq ($(BR2_powerpc)$(BR2_powerpc64)$(BR2_powerpc64le),y)
BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no
endif
ifeq ($(BR2_ENDIAN),"BIG")
BR2_AC_CV_C_BIGENDIAN = ac_cv_c_bigendian=yes
else
BR2_AC_CV_C_BIGENDIAN = ac_cv_c_bigendian=no
endif
# AM_GNU_GETTEXT misdetects musl gettext support.
# musl currently implements api level 1 and 2 (basic + ngettext)
# http://www.openwall.com/lists/musl/2015/04/16/3
#
# These autoconf variables should only be pre-seeded when the minimal
# gettext implementation of musl is used. When the full blown
# implementation provided by gettext libintl is used, auto-detection
# works fine, and pre-seeding those values is actually wrong.
ifeq ($(BR2_TOOLCHAIN_USES_MUSL):$(BR2_PACKAGE_GETTEXT_PROVIDES_LIBINTL),y:)
BR2_GT_CV_FUNC_GNUGETTEXT_LIBC = \
gt_cv_func_gnugettext1_libc=yes \
gt_cv_func_gnugettext2_libc=yes
endif
TARGET_CONFIGURE_ARGS = \
$(BR2_AC_CV_TRAP_CHECK) \
ac_cv_func_mmap_fixed_mapped=yes \
ac_cv_func_memcmp_working=yes \
ac_cv_have_decl_malloc=yes \
gl_cv_func_malloc_0_nonnull=yes \
ac_cv_func_malloc_0_nonnull=yes \
ac_cv_func_calloc_0_nonnull=yes \
ac_cv_func_realloc_0_nonnull=yes \
lt_cv_sys_lib_search_path_spec="" \
$(BR2_AC_CV_C_BIGENDIAN) \
$(BR2_GT_CV_FUNC_GNUGETTEXT_LIBC)
################################################################################
ifeq ($(BR2_SYSTEM_ENABLE_NLS),y)
NLS_OPTS = --enable-nls
TARGET_NLS_DEPENDENCIES = host-gettext
ifeq ($(BR2_PACKAGE_GETTEXT_PROVIDES_LIBINTL),y)
TARGET_NLS_DEPENDENCIES += gettext
TARGET_NLS_LIBS += -lintl
endif
else
NLS_OPTS = --disable-nls
endif
# We need anything that is invalid. Traditionally, we'd have used 'false' (and
# we did so in the past). However, that breaks libtool for packages that have
# optional C++ support (e.g. gnutls), because libtool will *require* a *valid*
# C++ preprocessor as long as CXX is not 'no'.
# Now, whether we use 'no' or 'false' for CXX as the same side effect: it is an
# invalid C++ compiler, and thus will cause detection of C++ to fail (which is
# expected and what we want), while at the same time taming libtool into
# silence.
ifneq ($(BR2_INSTALL_LIBSTDCPP),y)
TARGET_CONFIGURE_OPTS += CXX=no
endif
ifeq ($(BR2_STATIC_LIBS),y)
SHARED_STATIC_LIBS_OPTS = --enable-static --disable-shared
TARGET_CFLAGS += -static
TARGET_CXXFLAGS += -static
TARGET_FCFLAGS += -static
TARGET_LDFLAGS += -static
else ifeq ($(BR2_SHARED_LIBS),y)
SHARED_STATIC_LIBS_OPTS = --disable-static --enable-shared
else ifeq ($(BR2_SHARED_STATIC_LIBS),y)
SHARED_STATIC_LIBS_OPTS = --enable-static --enable-shared
endif
# Used by our binutils patches.
export BR_COMPILER_PARANOID_UNSAFE_PATH=enabled
include package/pkg-download.mk
include package/pkg-autotools.mk
include package/pkg-cmake.mk
include package/pkg-luarocks.mk
include package/pkg-perl.mk
include package/pkg-python.mk
include package/pkg-virtual.mk
include package/pkg-generic.mk
include package/pkg-kconfig.mk
include package/pkg-rebar.mk
include package/pkg-kernel-module.mk
include package/pkg-waf.mk
include package/pkg-golang.mk
include package/pkg-meson.mk
include package/pkg-qmake.mk
include package/pkg-cargo.mk
Reference in New Issue View Git Blame Copy Permalink