mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-11 14:23:52 +08:00
4bf38ac58c
The apu2 by PC Engines is a 64 bit single board computer with coreboot BIOS. It only has serial output, but no graphics chip. With its 2–4 ethernet ports, it is often used to build a firewall or router. The provided defconfig configures busybox and isolinux. It will output a hybrid ISO image that can be written to a USB stick or burned to a CD. Configuration based on a blogpost by Tony Arkles: http://www.better-bsp.com/blog/2017/03/02/buildrooting-for-apu2/ Signed-off-by: Danilo Bargen <mail@dbrgn.ch> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
41 lines
1.0 KiB
Plaintext
41 lines
1.0 KiB
Plaintext
Intro
|
|
=====
|
|
|
|
This is a board configuration for the apu2 platform by PC Engines.
|
|
|
|
https://pcengines.ch/apu2.htm
|
|
|
|
Since the apu2 does not have any graphical output, the default configuration
|
|
will ensure that the kernel output as well as the login prompt will be sent to
|
|
the serial port.
|
|
|
|
How to build
|
|
============
|
|
|
|
The provided defconfig creates a hybrid isolinux image that can be booted from
|
|
either an USB stick or a CD.
|
|
|
|
$ make pcengines_apu2_defconfig
|
|
$ make
|
|
|
|
How to write to an USB stick
|
|
============================
|
|
|
|
Once the build process is finished you will have an image
|
|
called "rootfs.iso9660" in the output/images/ directory.
|
|
|
|
Copy the bootable "rootfs.iso9660" onto the USB stick with "dd":
|
|
|
|
$ sudo dd if=output/images/rootfs.iso9660 of=/dev/sdX bs=1M conv=fsync
|
|
$ sudo sync
|
|
|
|
How to connect to the apu2
|
|
==========================
|
|
|
|
Connect to the DB9 serial port of the apu2 board (either directly or through a
|
|
USB adapter) with a baudrate of 115200.
|
|
|
|
For example with miniterm (part of pyserial):
|
|
|
|
$ miniterm.py -f direct /dev/ttyUSB0 115200
|