buildroot

mirror of https://git.busybox.net/buildroot.git synced 2024-11-27 07:23:30 +08:00

History

Vincent Stehlé 908ba9d637 configs/rockpro64: bump Linux kernel, U-Boot and TF-A - Bump Linux kernel to v6.10.14 and add the dependency on host python3. - Bump U-Boot to v2024.10 and add the dependency on GnuTLS and util-linux (for uuid). - Bump TF-A to v2.11. - Turn on hashes verification and add hashes for the Linux kernel and U-Boot. - Fix shellcheck warnings in the post-build script. - Remove the related exceptions in .checkpackageignore. Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Suniel Mahesh <sunil@amarulasolutions.com> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2024-10-22 22:56:15 +02:00
..
patches	configs/rockpro64: bump Linux kernel, U-Boot and TF-A	2024-10-22 22:56:15 +02:00
extlinux.conf	configs/rockpro64: bump ATF to 2.9, U-Boot to 2023.07 and Linux to 6.5.7	2023-11-02 18:48:12 +01:00
genimage.cfg	board/*/genimage.cfg: use partition-type-uuid = F for some FAT partitions	2022-07-23 15:36:22 +02:00
linux.fragment	board/pine64/rockpro64/linux.fragment: integrate stmmac driver	2024-07-09 22:30:19 +02:00
post-build.sh	configs/rockpro64: bump Linux kernel, U-Boot and TF-A	2024-10-22 22:56:15 +02:00
readme.txt	configs/rockpro64: new defconfig	2020-09-02 22:40:41 +02:00

readme.txt

PINE64 ROCKPro64
================
https://www.pine64.org/rockpro64/

Build:
======
  $ make rockpro64_defconfig
  $ make

Files created in output directory
=================================

output/images

├── bl31.elf
├── boot.vfat
├── extlinux
├── idbloader.img
├── Image
├── rk3399-rockpro64.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
└── u-boot.itb

Creating bootable SD card:
==========================

Simply invoke (as root)

sudo dd if=output/images/sdcard.img of=/dev/sdX && sync

Where X is your SD card device.

Booting:
========
RockPro64 has a 40-pin PI-2 GPIO Bus.

Connect a jumper between pin 23 and pin 25 for SD card boot.

Serial console:
---------------
The pin layout for serial console on PI-2 GPIO Bus is as follows:

pin 6:  gnd
pin 8:  tx
pin 10: rx

Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the
power is on then connect pin 10(receive).

Baudrate for this board is 1500000.

Login:
------
Enter 'root' as login user, and the prompt is ready.

https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html