mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-12 23:03:29 +08:00
0f430f0062
This patch add support for the low cost QMTECH XC7Z010 starter kit board [1]. [1] http://www.chinaqmtech.com/xilinx_zynq_soc Signed-off-by: Martin Chabot <martin.chabot@gmail.com> Signed-off-by: Julien Olivain <juju@cotds.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
77 lines
1.8 KiB
Plaintext
77 lines
1.8 KiB
Plaintext
*******************************
|
|
QMTECH Zynq XC7Z010 Starter Kit
|
|
*******************************
|
|
|
|
This file documents the Buildroot support for the QMTECH [1] Zynq
|
|
XC7Z010 Starter Kit [2]. It is a low cost (~55$) Zynq based
|
|
development board. The board user manual is available at
|
|
[3]. Additional files are available on Github [4].
|
|
|
|
|
|
Build
|
|
=====
|
|
|
|
First, configure Buildroot for the QMTECH Zynq board:
|
|
|
|
make zynq_qmtech_defconfig
|
|
|
|
Build all components:
|
|
|
|
make
|
|
|
|
You will find in output/images/ the following files:
|
|
- boot.bin
|
|
- boot.vfat
|
|
- devicetree.dtb
|
|
- rootfs.cpio
|
|
- rootfs.cpio.gz
|
|
- rootfs.cpio.uboot
|
|
- rootfs.tar
|
|
- sdcard.img
|
|
- u-boot.bin
|
|
- u-boot.img
|
|
- uImage
|
|
- zynq-qmtech.dtb
|
|
|
|
|
|
Create a bootable micro SD card
|
|
===============================
|
|
|
|
To determine the device associated to the micro SD card have a look in
|
|
the /proc/partitions file:
|
|
|
|
cat /proc/partitions
|
|
|
|
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
directory, ready to be dumped on a micro SD card. Launch the following
|
|
command as root:
|
|
|
|
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
|
|
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
|
|
|
|
Boot the QMTECH Zynq board
|
|
==========================
|
|
|
|
To boot your newly created system:
|
|
- put a mini USB cable into the J4 Debug USB Port and connect using a
|
|
terminal emulator at 115200 bps, 8n1,
|
|
- put the prepared micro SD card in the J2 micro SD card slot,
|
|
- plug the 5V power supply on the JP4 barrel jack.
|
|
|
|
Enjoy!
|
|
|
|
|
|
[1]. QMTECH:
|
|
http://www.chinaqmtech.com/
|
|
|
|
[2]. QMTECH Zynq XC7Z010 Starter Kit Product Page:
|
|
http://www.chinaqmtech.com/xilinx_zynq_soc
|
|
|
|
[3]. QMTECH Zynq XC7Z010 Starter Kit Hardware User Manual:
|
|
http://www.chinaqmtech.com/filedownload/32552
|
|
|
|
[4]. QMTECH Github:
|
|
https://github.com/ChinaQMTECH/ZYNQ_STARTER_KIT
|