mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-27 23:43:34 +08:00
d59749363f
- Update kernel - Add u-boot configuration - 6q_bootscript.txt is no more needed by new version of u-boot Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> [build test only] Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||
|---|---|---|
| .. | ||
| readme.txt | ||
This is the minimal buildroot support for the Congatec QMX6 Qseven CoM conga-QMX6 is based on the freescale iMX6 SoC. For more information please have a look at http://www.congatec.com/products/qseven/conga-qmx6.html The configuration is based on the currently latest kernel release from Congatec's git repository which is based on 3.0.35. The bootloader u-boot is preconfigured on the CPU module and does not need to be replaced. To build the default configuration you only have to: make qmx6_defconfig && make You will need a microSD card of sufficient size and the first or only partition configured as Linux type. To transfer the system to the card do: $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1 You can optionally extend the filesystem size to the whole partition: $ sudo resize2fs /dev/sdX1 You can also update the card image without completely rewriting it: $ sudo mount /dev/sdX1 /mnt $ sudo tar xf output/images/rootfs.tar -C /mnt $ sudo umount /mnt Connect a terminal program to the rs232 connector marked "CONSOLE" with baudrate set to 115200, insert the microSD card into the socket on the CPU module and power the board to watch the system boot. Booting from the SD card slot on the base board is currently not supported.