mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-27 23:43:34 +08:00
177bbf6566
Add support for imx23evk board. For more information about this board, please check: http://www.nxp.com/products/software-and-tools/software-development-tools/i.mx-software-and-tools/i.mx23-evaluation-kit:IMX23EVK Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
||
|---|---|---|
| .. | ||
| readme.txt | ||
************************** Freescale i.MX23 EVK board ************************** This file documents the Buildroot support for the Freescale i.MX23 EVK board. Build ===== First, configure Buildroot for your i.MX23 EVK board: make imx23evk_defconfig Build all components: make You will find in output/images/ directory the following files: - imx23-evk.dtb - rootfs.tar - u-boot.sd - zImage Create a bootable SD card ========================= To determine the device associated to the SD card have a look in the /proc/partitions file: cat /proc/partitions Then, run the following command: *** WARNING! The command will destroy all the card content. Use with care! *** sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device> Boot the i.MX23 EVK board ========================= - Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot from the SD card - Insert the SD card in the SD Card slot of the board; - Connect an RS232 UART cable to the Debug UART Port and connect using a terminal emulator at 115200 bps, 8n1; - power on the board. Enjoy!