mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-03 02:13:29 +08:00
4fabcd28ca
For more info, please read board/telit/evk-pro3/readme.txt Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> |
||
|---|---|---|
| .. | ||
| barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch | ||
| barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch | ||
| barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch | ||
| barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch | ||
| barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch | ||
| linux-3.9.config | ||
| readme.txt | ||
Buildroot board support for Telit EVK-PRO3 with Telit GE863-PRO3
Official site:
http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=10
Build images:
make telit_evk_pro3_defconfig
make
images built:
- output/images/barebox.bin
- output/images/zImage
- output/images/rootfs.ubi
Flash built images:
The first time you need to bootstrap from Telit Official Release 221.07.1007,
at the U-Boot prompt type:
U-Boot> loadb
send buildroot/output/images/barebox.bin
U-Boot> go 0x20200000
flash updated images using barebox through tftp:
barebox:/ erase dev/self0; cp /mnt/tftp/barebox.bin /dev/self0
barebox:/ erase /dev/nand0.kernel.bb; cp /mnt/tftp/zImage /dev/nand0.kernel.bb
barebox:/ erase /dev/nand0.rootfs.bb; cp /mnt/tftp/rootfs.ubi /dev/nand0.rootfs.bb
barebox:/ erase dev/env0
barebox:/ reset