mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-01 01:13:29 +08:00
23bc8059cd
Restore a patch which disables 00B IRQ for the built-in wlan module which allows working wlan module again. It turned out that it shouldn't have been deleted because the bug still exists in the mainline linux kernel, so keep this patch the same as armbian[1] to have wifi connection working correctly. [1] https://github.com/armbian/build/blob/master/patch/kernel/sunxi-dev/ARM-dts-sun7i-Disable-OOB-IRQ-for-brcm-wifi-on-Cubietruck-and-Banana-Pro.patch Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> |
||
|---|---|---|
| .. | ||
| patches/linux | ||
| rootfs_overlay/lib/firmware/brcm | ||
| boot.cmd | ||
| genimage.cfg | ||
| linux-wifi.fragment | ||
| post-build.sh | ||
| post-image.sh | ||
| readme.txt | ||
Banana Pro Intro ===== This default configuration will allow you to start experimenting with the Buildroot environment for the Banana Pro. With the current configuration it will bring-up the board, and allow access through the serial console. How to build it =============== Configure Buildroot: $ make bananapro_defconfig Compile everything and build the SD card image: $ make How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ dd if=output/images/sdcard.img of=/dev/sdX Notes: - replace 'sdX' with the actual device with your micro SD card - you may need to be root to do that (use 'sudo') Insert the micro SD card in your Banana Pro and power it up. The console is on the debug TTL UART, 115200 8N1. Ethernet ========== # udhcpc -i eth0 Wifi ========== # wpa_passphrase YOUR_SSID >> /etc/wpa_supplicant.conf (enter the wifi password and press enter) # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B # udhcpc -i wlan0 Note: - replace 'YOUR_SSID' with the actual SSID from your access point Audio ========== Connect a headphone to the 3.5mm jack (TRRS). Note, that the Banana Pro has an on-board microphone, too. # amixer cset name='Power Amplifier DAC Playback Switch' on # amixer cset name='Power Amplifier Mute Switch' on # amixer cset name='Power Amplifier Volume' 42