buildroot

mirror of https://git.busybox.net/buildroot.git synced 2024-12-04 10:53:30 +08:00

History

Jagan Teki 2dd62b6d6e configs/orangepi_lite2: add WiFi support Orangepi lite2 board has AP6356S WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add broadcom wireless firmware package to image - add basic wireless tools to image - add rootfs overlay with proper NVRAM file for on-board AP6356S chip - add mdev to image to enable module autoloading - update readme.txt to test wifi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>		2018-12-16 15:56:53 +01:00
..
rootfs_overlay/lib/firmware/brcm	configs/orangepi_lite2: add WiFi support	2018-12-16 15:56:53 +01:00
extlinux.conf	configs/orangepi_lite2: new defconfig	2018-12-16 15:56:17 +01:00
genimage.cfg	configs/orangepi_lite2: new defconfig	2018-12-16 15:56:17 +01:00
post-build.sh	configs/orangepi_lite2: new defconfig	2018-12-16 15:56:17 +01:00
readme.txt	configs/orangepi_lite2: add WiFi support	2018-12-16 15:56:53 +01:00

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Lite2. With the current configuration
it will bring-up the board, and allow access through the serial console.

Orangepi Lite2 link:
http://www.orangepi.org/Orange%20Pi%20Lite%202/

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2

How to build
============

    $ make orangepi_lite2_defconfig
    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
is on the serial line, 115200 8N1.

WiFi
====

 # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
   (type password and enter)
 # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
 # udhcpc -i wlan0
 # ping google.com