mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-12 06:43:43 +08:00
08d938100e
Beatify this genimage .cfg file to have consistency with all genimage .cfg files in Buildroot. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> |
||
|---|---|---|
| .. | ||
| boot.cmd | ||
| genimage.cfg | ||
| readme.txt | ||
Intro ===== This default configuration will allow you to start experimenting with the Buildroot environment for the Bananapi M2 Zero. With the current configuration it will bring-up the board, and allow access through the serial console. Bananapi M2 Zero link: http://www.banana-pi.org/m2z.html This configuration uses U-Boot mainline and kernel mainline. How to build ============ $ make bananapi_m2_zero_defconfig $ make Note: you will need access to the internet to download the required sources. How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX $ sync Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console is on the Debug UART on the CON3 header, with serial settings 115200 8N1.