mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-12 06:43:43 +08:00
a0f0b54013
Add intial support for Bananapi M2 Ultra board based on the Allwinner R40 SoC. - U-Boot 2018.07 - Linux 4.18.12 Board specifications: http://www.banana-pi.org/m2u.html Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
36 lines
921 B
Plaintext
36 lines
921 B
Plaintext
Intro
|
|
=====
|
|
|
|
This default configuration will allow you to start experimenting with the
|
|
buildroot environment for the Bananapi M2 ULtra. With the current
|
|
configuration it will bring-up the board, and allow access through the
|
|
serial console.
|
|
|
|
Bananapi M2 Ultra link:
|
|
http://www.banana-pi.org/m2u.html
|
|
|
|
This configuration uses U-Boot mainline and kernel mainline.
|
|
|
|
How to build
|
|
============
|
|
|
|
$ make bananapi_m2_ultra_defconfig
|
|
$ make
|
|
|
|
Note: you will need access to the internet to download the required
|
|
sources.
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
|
in the output/images/ directory.
|
|
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
|
|
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
|
$ sudo sync
|
|
|
|
Insert the micro SDcard in your Bananapi M2 Ultra and power it up. The console
|
|
is on the serial line, 115200 8N1.
|