mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-11-24 05:53:30 +08:00
Code Issues Packages Projects Releases Wiki Activity
700ecefcc5
buildroot/board/linksprite/pcduino
History
Arnout Vandecappelle 31be2ec220 boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts 
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.

This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2017-07-05 15:23:13 +02:00
..
boot.cmd configs: add support for LinkSprite pcDuino 2016-06-12 18:39:55 +02:00
genimage.cfg pcduino: Accommodate U-Boot environment on SD-card 2016-07-02 13:19:12 +02:00
linux-extras.config configs: add support for LinkSprite pcDuino 2016-06-12 18:39:55 +02:00
post-build.sh boards: replace $HOST_DIR/usr/ with $HOST_DIR/ in scripts 2017-07-05 15:23:13 +02:00
post-image.sh configs: add support for LinkSprite pcDuino 2016-06-12 18:39:55 +02:00
readme.txt configs: add support for LinkSprite pcDuino 2016-06-12 18:39:55 +02:00

readme.txt 

pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino)

Intro
=====

This default configuration will allow you to start experimenting
with the buildroot environment for the LinkSprite pcDuino v1 board
including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the
current configuration it will bring-up the board and allow access
through the serial console as well as ethernet and wireless
network interfaces.

How to build it
===============

Configure Buildroot:

    $ make linksprite_pcduino_defconfig

Modify configuration if needed, e.g. add more packages to target:

    $ make menuconfig

Compile everything and build the SD card image:

    $ make

How to write the SD card
========================

Once the build process is finished you will have an image
called "sdcard.img" in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

How to boot new image
=====================

Insert SD card and reset the board. By default pcDuino board
boots from SD card.