mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-28 07:53:32 +08:00
5502a889dd
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.
Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for
beaglebone.
Drop the post-image script.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
||
|---|---|---|
| .. | ||
| patches/linux | ||
| genimage_linux41.cfg | ||
| genimage.cfg | ||
| linux-sgx.fragment | ||
| post-build.sh | ||
| readme.txt | ||
| uEnv.txt | ||
CircuitCo BeagleBone Texas Instuments AM335x Evaluation Module (TMDXEVM3358) Description =========== This configuration will build a complete image for the beaglebone and the TI AM335x-EVM, the board type is identified by the on-board EEPROM. The configuration is based on the ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone variants and the evm-sk are built too. For Qt5 support support use the beaglebone_qt5_defconfig. How to build it =============== Select the default configuration for the target: $ make beaglebone_defconfig Optional: modify the configuration: $ make menuconfig Build: $ make Result of the build =================== output/images/ +-- am335x-boneblack.dtb +-- am335x-bone.dtb +-- am335x-evm.dtb +-- am335x-evmsk.dtb +-- boot.vfat +-- MLO +-- rootfs.ext2 +-- rootfs.tar +-- sdcard.img +-- u-boot.img +-- uEnv.txt +-- zImage To copy the image file to the sdcard use dd: $ dd if=output/images/sdcard.img of=/dev/XXX Tested hardware =============== am335x-evm (rev. 1.1A) beagleboneblack (rev. A5A) beaglebone (rev. A6) 2016, Lothar Felten <lothar.felten@gmail.com>