mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-27 23:43:34 +08:00
86eecc4606
This adds support the Xilinx ZCU106 development board. [Tested on the ES2 (Engineering Sample 2) version of the board] Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Joel Carlson <joelsoncarl@gmail.com> Tested-by: Joel Carlson <JoelsonCarl@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
52 lines
1.2 KiB
Plaintext
52 lines
1.2 KiB
Plaintext
********************************
|
|
Xilinx ZCU106 board - ZynqMP SoC
|
|
********************************
|
|
|
|
This document describes the Buildroot support for the ZCU106 board by
|
|
Xilinx, based on the Zynq UltraScale+ MPSoC (aka ZynqMP). It has been
|
|
tested with the EK-U1-ZCU106-ES2 pre-production board.
|
|
|
|
How to build it
|
|
===============
|
|
|
|
Configure Buildroot:
|
|
|
|
$ make zynqmp_zcu106_defconfig
|
|
|
|
Compile everything and build the rootfs image:
|
|
|
|
$ make
|
|
|
|
Result of the build
|
|
-------------------
|
|
|
|
After building, you should get a tree like this:
|
|
|
|
output/images/
|
|
+-- atf-uboot.ub
|
|
+-- bl31.bin
|
|
+-- boot.bin
|
|
+-- boot.vfat
|
|
+-- Image
|
|
+-- rootfs.ext2
|
|
+-- rootfs.ext4 -> rootfs.ext2
|
|
+-- sdcard.img
|
|
+-- system.dtb -> zynqmp-zcu106-revA.dtb
|
|
+-- u-boot.bin
|
|
`-- zynqmp-zcu106-revA.dtb
|
|
|
|
How to write the SD card
|
|
========================
|
|
|
|
WARNING! This will destroy all the card content. Use with care!
|
|
|
|
The sdcard.img file is a complete bootable image ready to be written
|
|
on the boot medium. To install it, simply copy the image to an SD
|
|
card:
|
|
|
|
# dd if=output/images/sdcard.img of=/dev/sdX
|
|
|
|
Where 'sdX' is the device node of the SD.
|
|
|
|
Eject the SD card, insert it in the board, and power it up.
|