mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-01 01:13:29 +08:00
83d7a37be1
Add initial support for SoPine board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: TL Lim <tllim@pine64.org> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> |
||
|---|---|---|
| .. | ||
| boot.cmd | ||
| genimage.cfg | ||
| readme.txt | ||
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the SoPine. With the current configuration
it will bring-up the board, and allow access through the serial console.
SoPINE link:
https://www.pine64.org/?page_id=1491
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/SoPine
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make pine64_sopine_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your SoPine and power it up. The console
is on the serial line, 115200 8N1.