mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-01 01:13:29 +08:00
4fdaf76a52
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
||
|---|---|---|
| .. | ||
| genimage.cfg | ||
| readme.txt | ||
Pandaboard ========== This file documents the Buildroot support for the Pandaboard, a low-power, low-cost single-board computer development platform based on the Texas Instruments OMAP4 system on a chip (SoC). Configuring and building Buildroot ---------------------------------- Start from the defconfig: $ make pandaboard_defconfig You can edit build options the usual way: $ make menuconfig When you are happy with the setup, run: $ make The result of the build with the default settings should be these files: output/images +-- MLO +-- omap4-panda-a4.dtb +-- omap4-panda.dtb +-- omap4-panda-es.dtb +-- rootfs.ext4 +-- sdcard.img +-- u-boot.img +-- zImage How to write the SD card ------------------------ Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX instead depending on setup).