mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-18 17:53:34 +08:00
109 lines
3.5 KiB
ISCdhcpd
109 lines
3.5 KiB
ISCdhcpd
#
|
|
# Sample configuration file for ISC dhcpd for Debian
|
|
#
|
|
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
|
|
#
|
|
|
|
# The ddns-updates-style parameter controls whether or not the server will
|
|
# attempt to do a DNS update when a lease is confirmed. We default to the
|
|
# behavior of the version 2 packages ('none', since DHCP v2 didn't
|
|
# have support for DDNS.)
|
|
ddns-update-style none;
|
|
|
|
# option definitions common to all supported networks...
|
|
option domain-name "example.org";
|
|
option domain-name-servers ns1.example.org, ns2.example.org;
|
|
|
|
default-lease-time 600;
|
|
max-lease-time 7200;
|
|
|
|
# If this DHCP server is the official DHCP server for the local
|
|
# network, the authoritative directive should be uncommented.
|
|
#authoritative;
|
|
|
|
# Use this to send dhcp log messages to a different log file (you also
|
|
# have to hack syslog.conf to complete the redirection).
|
|
log-facility local7;
|
|
|
|
# No service will be given on this subnet, but declaring it helps the
|
|
# DHCP server to understand the network topology.
|
|
|
|
#subnet 10.152.187.0 netmask 255.255.255.0 {
|
|
#}
|
|
|
|
# This is a very basic subnet declaration.
|
|
|
|
#subnet 10.254.239.0 netmask 255.255.255.224 {
|
|
# range 10.254.239.10 10.254.239.20;
|
|
# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
|
|
#}
|
|
|
|
# This declaration allows BOOTP clients to get dynamic addresses,
|
|
# which we don't really recommend.
|
|
|
|
#subnet 10.254.239.32 netmask 255.255.255.224 {
|
|
# range dynamic-bootp 10.254.239.40 10.254.239.60;
|
|
# option broadcast-address 10.254.239.31;
|
|
# option routers rtr-239-32-1.example.org;
|
|
#}
|
|
|
|
# A slightly different configuration for an internal subnet.
|
|
#subnet 10.5.5.0 netmask 255.255.255.224 {
|
|
# range 10.5.5.26 10.5.5.30;
|
|
# option domain-name-servers ns1.internal.example.org;
|
|
# option domain-name "internal.example.org";
|
|
# option routers 10.5.5.1;
|
|
# option broadcast-address 10.5.5.31;
|
|
# default-lease-time 600;
|
|
# max-lease-time 7200;
|
|
#}
|
|
|
|
# Hosts which require special configuration options can be listed in
|
|
# host statements. If no address is specified, the address will be
|
|
# allocated dynamically (if possible), but the host-specific information
|
|
# will still come from the host declaration.
|
|
|
|
#host passacaglia {
|
|
# hardware ethernet 0:0:c0:5d:bd:95;
|
|
# filename "vmunix.passacaglia";
|
|
# server-name "toccata.fugue.com";
|
|
#}
|
|
|
|
# Fixed IP addresses can also be specified for hosts. These addresses
|
|
# should not also be listed as being available for dynamic assignment.
|
|
# Hosts for which fixed IP addresses have been specified can boot using
|
|
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
|
|
# be booted with DHCP, unless there is an address range on the subnet
|
|
# to which a BOOTP client is connected which has the dynamic-bootp flag
|
|
# set.
|
|
#host fantasia {
|
|
# hardware ethernet 08:00:07:26:c0:a5;
|
|
# fixed-address fantasia.fugue.com;
|
|
#}
|
|
|
|
# You can declare a class of clients and then do address allocation
|
|
# based on that. The example below shows a case where all clients
|
|
# in a certain class get addresses on the 10.17.224/24 subnet, and all
|
|
# other clients get addresses on the 10.0.29/24 subnet.
|
|
|
|
#class "foo" {
|
|
# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
|
|
#}
|
|
|
|
#shared-network 224-29 {
|
|
# subnet 10.17.224.0 netmask 255.255.255.0 {
|
|
# option routers rtr-224.example.org;
|
|
# }
|
|
# subnet 10.0.29.0 netmask 255.255.255.0 {
|
|
# option routers rtr-29.example.org;
|
|
# }
|
|
# pool {
|
|
# allow members of "foo";
|
|
# range 10.17.224.10 10.17.224.250;
|
|
# }
|
|
# pool {
|
|
# deny members of "foo";
|
|
# range 10.0.29.10 10.0.29.230;
|
|
# }
|
|
#}
|