buildroot

mirror of https://git.busybox.net/buildroot.git synced 2024-12-04 19:03:28 +08:00

History

Marcin Niestroj c9abeddce6 board: add support for chiliBoard Board support package includes: * Buildroot defconfig * Mainline Linux kernel v4.9.6 * Mainline U-Boot (current HEAD revision is used, as board support patches are not in stable release yet) * genimage config to create sdcard image * Board readme.txt [Peter: use http:// instead of git:// for u-boot] Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com>		2017-01-30 21:24:43 +01:00
..
genimage.cfg	board: add support for chiliBoard	2017-01-30 21:24:43 +01:00
post-image.sh	board: add support for chiliBoard	2017-01-30 21:24:43 +01:00
readme.txt	board: add support for chiliBoard	2017-01-30 21:24:43 +01:00

readme.txt

**********
chiliBoard
**********

Build
=====

First, configure Buildroot for your chiliBoard:

  make grinn_chiliboard_defconfig

Build image:

  make

After building you should get a tree like this:

  output/images/
  ├── am335x-chiliboard.dtb
  ├── boot.vfat
  ├── MLO
  ├── rootfs.ext2
  ├── rootfs.ext4
  ├── rootfs.tar
  ├── sdcard.img
  ├── u-boot.img
  └── zImage

Create a bootable microSD card
==============================

Buildroot prepares a bootable microSD card image "sdcard.img" in output/images/
directory, To flash SD card just run the following command:

  sudo dd if=output/images/sdcard.img of=/dev/<sd_card> bs=1M

where <sd_card> can be sdX or mmcblkX

*** WARNING! This will destroy all contents of device you specify! ***

Boot chiliBoard
===============

- insert the microSD card in the microSD slot of the board;
- plug micro USB cable to provide power and console interface
- use terminal emulator with 115200 bps, 8n1