mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-24 14:03:29 +08:00
3e708ed1f2
This patch bumps following packages to the newer version: - OpenSBI v1.1 - U-boot v2022.10 - Linux 6.0 Linux kernel is hosted on AndesTech Github which includes ethernet, SD card, DMAC, RTC, WDT drivers support. OpenSBI is based on v1.1 with andes platfrom fdt driver. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| patches/uboot | ||
| rootfs_overlay/boot/extlinux | ||
| genimage_sdcard.cfg | ||
| post-build.sh | ||
| readme.txt | ||
| uboot.config.fragment | ||
Intro ===== Andestech AE350 Platform The AE350 prototype demonstrates the AE350 platform on the FPGA. How to build it =============== Configure Buildroot ------------------- $ make andes_ae350_45_defconfig If you want to customize your configuration: $ make menuconfig Build everything ---------------- Note: you will need to access to the network, since Buildroot will download the packages' sources. $ make Result of the build ------------------- After building, you should obtain the following files: output/images/ |-- ae350_ax45mp.dtb |-- boot.vfat |-- fw_dynamic.bin |-- fw_dynamic.elf |-- Image |-- rootfs.ext2 |-- rootfs.ext4 -> rootfs.ext2 |-- sdcard.img |-- u-boot-spl.bin `-- u-boot.itb Copy the sdcard.img to a SD card with "dd": $ sudo dd if=sdcard.img of=/dev/sdX bs=4096 $ sudo sync Your SD card partition should be: Disk /dev/sdb: 14.48 GiB, 15552479232 bytes, 30375936 sectors Disk model: Multi-Card Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x00000000 Device Boot Start End Sectors Size Id Type /dev/sdb1 1 4096 4096 2M c W95 FAT32 (LBA) /dev/sdb2 * 4097 126976 122880 60M 83 Linux Insert SD card and reset the board, it should boot Linux from mmc.