mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-24 05:53:30 +08:00
2bcfb2549b
imxrt1050-evk was using uImage switch to using zImage now. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| genimage.cfg | ||
| readme.txt | ||
| uboot.fragment | ||
NXP i.MXRT1050 EVK board ------------------------ i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high level of integration of an applications processors with the ease-of-use and real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm Cortex-M7 core at 600 MHz. https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK To build a minimal support for this board: $ make imxrt1050-evk_defconfig $ make Buildroot prepares a bootable "sdcard.img" image in the output/images/ directory, ready to be flashed into the SD card: $ dd if=output/images/sdcard.img of=/dev/sdX Where 'sdX' is the device node of the uSD. Jumper settings: SW7: 1 0 1 0 Where 0 means bottom position and 1 means top position (from the switch label numbers reference). Connect the USB cable between the EVK and the PC for the console. Insert the micro SD card in the board, power it up and U-Boot messages should come up.