mirror of
https://git.busybox.net/buildroot.git
synced 2024-12-12 06:43:43 +08:00
fe8f95a61e
Add support for MangoPi MQ1RDW2: https://mangopi.org/mqr An Allwinner T113-S3(2xCortex-A7+128MB DDR3-1600 embedded) based SBC with: * USB-OTG Type-C socket * USB-HOST Type-C socket * 2x 18 pin GPIO headers * TF card slot * RTL8723DS WiFi module with ext. antenna connector * 40 pin RGB FPC connector * 6 pin CTP FPC connector * 24 pin DVP FPC connector * onboard mic * onboard audio amplifier * FEL,reset button Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| rootfs_overlay | ||
| genimage.cfg | ||
| readme.txt | ||
MangoPi MQ1RDW2 =============== MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer. It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated 128MB DDR3-1600 RAM. Board features: - USB-OTG Type-C socket - USB-HOST Type-C socket - 2x 18 pin GPIO headers - TF card slot - RTL8723DS WiFi module with ext. antenna connector - 40 pin RGB FPC connector - 6 pin CTP FPC connector - 24 pin DVP FPC connector - onboard mic - onboard audio amplifier - FEL,reset button How to build ============ $ make mangopi_mq1rdw2_defconfig $ make Wifi ========== Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or /etc/wpa_supplicant.conf once connected to the board: * Replace YOURSSID with your AP ssid * Replace YOURPASSWD with your AP password How to write the SD card ======================== Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and plug in a USB-C cable to the OTG or HOST connector to boot the system.