mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-27 07:23:30 +08:00
278f908d55
The current Buildroot defconfigs for qemu_x86 and qemu_x86_64
instantiate a console on tty1, which appears on QEMU's
graphical window. Add a console on the serial port (ttyS0) to
be used later for gitlab testing.
This change is need since the script used for gitlab testing
needs to use a serial output with pexpect.
This change is similar to the one made for raspberrypi [1] to
handle HDMI and serial console:
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyS0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyS0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyS0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate a console on QEMU graphical window, then
instantiate a really-serial console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window
[1] 20878a1017
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
28 lines
621 B
Plaintext
28 lines
621 B
Plaintext
# Architecture
|
|
BR2_i386=y
|
|
BR2_x86_pentiumpro=y
|
|
|
|
# System
|
|
BR2_SYSTEM_DHCP="eth0"
|
|
|
|
# Filesystem
|
|
BR2_TARGET_ROOTFS_EXT2=y
|
|
# BR2_TARGET_ROOTFS_TAR is not set
|
|
|
|
# Image
|
|
BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86/post-build.sh"
|
|
|
|
# Linux headers same as kernel, a 4.19 series
|
|
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
|
|
|
|
# Kernel
|
|
BR2_LINUX_KERNEL=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.91"
|
|
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
|
|
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux.config"
|
|
|
|
# host-qemu for gitlab testing
|
|
BR2_PACKAGE_HOST_QEMU=y
|
|
BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y
|