buildroot

mirror of https://git.busybox.net/buildroot.git synced 2024-11-24 05:53:30 +08:00

History

Thomas Petazzoni a87ae21630 board/*/genimage.cfg: use partition-type-uuid = F for some FAT partitions The genimage.cfg modified by this commit used the partition-type-uuid c12a7328-f81f-11d2-ba4b-00a0c93ec93b, which identifies the EFI System Partition, for a partition that isn't the EFI System Partition, but just a regular FAT partition, for which GUID ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 is more appropriate. So we switch these to use partition-type-uuid = F, as it makes more sense. Please note that this commit introduces a difference in the resulting output, as those partitions will now have a different GUID. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>		2022-07-23 15:36:22 +02:00
..
extlinux.conf	configs/rock_pi_n8: new defconfig	2020-08-16 22:40:59 +02:00
genimage.cfg	board/*/genimage.cfg: use partition-type-uuid = F for some FAT partitions	2022-07-23 15:36:22 +02:00
post-build.sh	configs/rock_pi_n8: new defconfig	2020-08-16 22:40:59 +02:00
readme.txt	configs/rock_pi_n8: new defconfig	2020-08-16 22:40:59 +02:00

readme.txt

RADXA ROCKPI-N8
================
https://wiki.radxa.com/RockpiN8

Build:
======
  $ make rock_pi_n8_defconfig
  $ make

Files created in output directory
=================================

output/images
.
├── boot.vfat
├── extlinux
├── idbloader.img
├── rk3288-rock-pi-n8.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
├── u-boot-dtb.bin
├── u-boot-dtb.img
└── zImage

Creating bootable SD card:
==========================

Simply invoke (as root)

sudo dd if=output/images/sdcard.img of=/dev/sdX && sync

Where X is your SD card device.

Booting:
========

Serial console:
---------------
RockPi-N8 has a 40-pin GPIO header. The pin layout is as follows:

pin 6:  gnd
pin 8:  tx
pin 10: rx

Baudrate for this board is 115200.

The boot order on rockpi-n8 is emmc, sd. If emmc contains a valid Image, the board
always boots from emmc. To boot from SD, erase emmc as per the guide:

https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html

Login:
------
Enter 'root' as login user, and the prompt is ready.

wiki link:
----------
https://wiki.amarulasolutions.com/bsp/rockchip/rk3288/rock-pi-n8.html