mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-24 22:13:34 +08:00
4f56655b2b
Some ZynqMP device trees in the kernel have a dot in their name, for example "zynqmp-zcu102-rev1.0". The post image script left out the part after the dot and created an invalid symlink. Signed-off-by: Francois Beerten <fbeerten.git@colabti.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| patches/uboot | ||
| genimage.cfg | ||
| post-image.sh | ||
| readme.txt | ||
********************************
Xilinx ZCU106 board - ZynqMP SoC
********************************
This document describes the Buildroot support for the ZCU106 board by
Xilinx, based on the Zynq UltraScale+ MPSoC (aka ZynqMP). It has been
tested with the EK-U1-ZCU106-ES2 pre-production board.
How to build it
===============
Configure Buildroot:
$ make zynqmp_zcu106_defconfig
Compile everything and build the rootfs image:
$ make
Result of the build
-------------------
After building, you should get a tree like this:
output/images/
+-- atf-uboot.ub
+-- bl31.bin
+-- boot.bin
+-- boot.vfat
+-- Image
+-- rootfs.ext2
+-- rootfs.ext4 -> rootfs.ext2
+-- sdcard.img
+-- system.dtb -> zynqmp-zcu106-revA.dtb
+-- u-boot.bin
`-- zynqmp-zcu106-revA.dtb
How to write the SD card
========================
WARNING! This will destroy all the card content. Use with care!
The sdcard.img file is a complete bootable image ready to be written
on the boot medium. To install it, simply copy the image to an SD
card:
# dd if=output/images/sdcard.img of=/dev/sdX
Where 'sdX' is the device node of the SD.
Eject the SD card, insert it in the board, and power it up.