mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-24 22:13:34 +08:00
f093b478e1
Add initial support for Orangepi Prime board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> |
||
|---|---|---|
| .. | ||
| boot.cmd | ||
| genimage.cfg | ||
| readme.txt | ||
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Prime. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi Prime link:
http://www.orangepi.org/OrangePiPrime/
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make orangepi_prime_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi Prime and power it up. The console
is on the serial line, 115200 8N1.