mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-30 17:03:31 +08:00
8eb94081de
Beatify this genimage .cfg file to have consistency with all genimage .cfg files in Buildroot. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> |
||
|---|---|---|
| .. | ||
| genimage.cfg | ||
| readme.txt | ||
Pandaboard ========== This file documents the Buildroot support for the Pandaboard, a low-power, low-cost single-board computer development platform based on the Texas Instruments OMAP4 system on a chip (SoC). Configuring and building Buildroot ---------------------------------- Start from the defconfig: $ make pandaboard_defconfig You can edit build options the usual way: $ make menuconfig When you are happy with the setup, run: $ make The result of the build with the default settings should be these files: output/images +-- MLO +-- omap4-panda-a4.dtb +-- omap4-panda.dtb +-- omap4-panda-es.dtb +-- rootfs.ext4 +-- sdcard.img +-- u-boot.img +-- zImage How to write the SD card ------------------------ Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX Where /dev/sdX is the device node of your SD card (may be /dev/mmcblkX instead depending on setup).