mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-23 05:23:39 +08:00
4bf38ac58c
The apu2 by PC Engines is a 64 bit single board computer with coreboot BIOS. It only has serial output, but no graphics chip. With its 2–4 ethernet ports, it is often used to build a firewall or router. The provided defconfig configures busybox and isolinux. It will output a hybrid ISO image that can be written to a USB stick or burned to a CD. Configuration based on a blogpost by Tony Arkles: http://www.better-bsp.com/blog/2017/03/02/buildrooting-for-apu2/ Signed-off-by: Danilo Bargen <mail@dbrgn.ch> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| isolinux.cfg | ||
| linux.config | ||
| readme.txt | ||
Intro
=====
This is a board configuration for the apu2 platform by PC Engines.
https://pcengines.ch/apu2.htm
Since the apu2 does not have any graphical output, the default configuration
will ensure that the kernel output as well as the login prompt will be sent to
the serial port.
How to build
============
The provided defconfig creates a hybrid isolinux image that can be booted from
either an USB stick or a CD.
$ make pcengines_apu2_defconfig
$ make
How to write to an USB stick
============================
Once the build process is finished you will have an image
called "rootfs.iso9660" in the output/images/ directory.
Copy the bootable "rootfs.iso9660" onto the USB stick with "dd":
$ sudo dd if=output/images/rootfs.iso9660 of=/dev/sdX bs=1M conv=fsync
$ sudo sync
How to connect to the apu2
==========================
Connect to the DB9 serial port of the apu2 board (either directly or through a
USB adapter) with a baudrate of 115200.
For example with miniterm (part of pyserial):
$ miniterm.py -f direct /dev/ttyUSB0 115200