mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-23 05:23:39 +08:00
842f19849e
uImage is almost deprecated so let's switch to zImage. Let's also bump Linux version to 6.1.44, U-Boot to 2023.07 and remove BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by BR2_TARGET_UBOOT_NEEDS_PYLIBFDT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| extlinux.conf | ||
| genimage.cfg | ||
| post-build.sh | ||
| readme.txt | ||
Tinker RK3288 ============= Tinker Board is a Single Board Computer (SBC) in an ultra-small form factor that offers class-leading performance while leveraging outstanding mechanical compatibility. Tinker link: https://www.asus.com/in/Single-Board-Computer/Tinker-Board/ Wiki link: https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288 How to build it =============== $ make asus_tinker_rk3288_defconfig Then you can edit the build options using $ make menuconfig Compile all and build rootfs image: $ make Prepare your SDCard =================== Buildroot generates a ready-to-use SD card image that you can flash directly to the card. The image will be in output/images/sdcard.img. You can write this image directly to an SD card device (i.e. /dev/xxx): $ sudo dd if=output/images/sdcard.img of=/dev/xxx $ sudo sync Finally, you can insert the SD card to the Tinker RK3288 board and boot it. NOTE: USB power supply requires more than the standard 500mA USB current, so this board must be supplied from a capable port or from an external AC/DC adapter. Otherwise it will hang forever while loading the kernel image.