mirror of
https://git.busybox.net/buildroot.git
synced 2024-11-27 07:23:30 +08:00
7f383ac3f0
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
||
|---|---|---|
| .. | ||
| genimage.cfg | ||
| readme.txt | ||
BeagleBoard X15 Intro ===== This config currently supports the beagleboard x15, and generates a barebone image. The image must be flashed to a SD card to be used. How to build it =============== $ make beagleboardx15_defconfig Then you can edit the build options using $ make menuconfig Compile all and build a sdcard image: $ make Result of the build ------------------- After building, you should get a tree like this: output/images/ +-- am57xx-beagle-x15.dtb +-- am57xx-beagle-x15-revb1.dtb +-- boot.vfat +-- MLO +--rootfs.ext2 +-- rootfs.ext4 +-- rootfs.tar +-- sdcard.img +-- u-boot.img +-- u-boot-spl.bin +-- zImage How to write the microSD card ============================= Once the build process is finished you will have an image called "sdcard.img" in the output/images/ directory. Copy the bootable "sdcard.img" onto an SD card with "dd": $ sudo dd if=output/images/sdcard.img of=/dev/sdX