mirrors/buildroot
0
0
Fork 0
mirror of https://git.busybox.net/buildroot.git synced 2024-12-04 10:53:30 +08:00
Code Issues Packages Projects Releases Wiki Activity
2020.05.x
buildroot/board/solidrun/mx6cubox
History
Thomas Petazzoni 9ddbd11620 board/solidrun/mx6cubox: create boot.scr in TARGET_DIR/boot 
There is no reason to create boot.scr in board/solidrun/mx6cubox and
later install it in TARGET_DIR/boot, leaving a stale file behind.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-04-13 21:46:23 +02:00
..
boot.scr.txt configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
genimage.cfg configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
post-build.sh board/solidrun/mx6cubox: create boot.scr in TARGET_DIR/boot 2020-04-13 21:46:23 +02:00
post-image.sh configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00
readme.txt configs: Add support for Solidrun's MX6 Cubox/Hummingboard 2016-09-14 22:58:31 +02:00

readme.txt 

Solidrun's MX6 Cubox/Hummingboard

https://www.solid-run.com/freescale-imx6-family/hummingboard/

https://www.solid-run.com/freescale-imx6-family/cubox-i/

To build a minimal support for these boards:

    $ make mx6cubox_defconfig
    $ make

Buildroot prepares a bootable "sdcard.img" image in the output/images/
directory, ready to be dumped on an SD card:

dd if=output/images/sdcard.img of=/dev/<your-microsd-device>

For details about the medium image layout, see the definition in
board/solidrun/mx6cubox/genimage.cfg.