The python and python3 builds mark libpython as read-only which
prevents it from being stripped out correctly for the target.
Signed-off-by: Przemyslaw Wrzos <przemyslaw.wrzos@calyptech.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are going to bump setuptools to a much newer version, the host
python needs to be built with support for unicodedata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python package infrastructure will need the Python 3 package to
provide a PYTHON3_PATH environment variable in order to build
third-party Python modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the Python3 package to use Python 3.4.0rc1.
About the patches:
* The patches below 100 are significantly changed, because like for
Python 2.x, a good number of improvements have been made in the
upstream Python for cross-compilation. Therefore, almost all of
these patches have been modified.
* All the patches above 100 are simply updated for Python 3.4.0, with
a small refactoring for the handling of test modules.
The details of the python3.mk changes are:
* --without-ensurepip to tell Python to not use PIP at build time.
* Many environment variables are no longer passed, they were specific
to our cross-compilation patches
* The fixup of the LIBDIR in the Python Makefile is no longer needed
since Python has switched to _sysconfigdata.py for distutils
configuration instead of parsing the Makefile.
* A new post patch hooks touches the two files generated by pgen to
make sure they are newer than the pgen sources, which ensures pgen
is not built/executed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some parts of python3.mk were hardcoding the 3.3 version as the major
version, which does not work for Python 3.4 and other future
versions. Instead, use the existing PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target python3 depends on host-python3, but most of the scripts
call "python", so we need to ensure that $(HOST_DIR)/usr/bin/python
exists. This patch achieves this by creating a python -> python3
symbolic link in $(HOST_DIR), just like we are already doing for the
target Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Buildroot, we do not support installing both Python 2.x and Python
3.x on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the python2 patches were left behind when doing the python3
package. This was because the python build system can now autodetect
what packages can be built in the system.
However, some of these patches are actually useful to reduce drastically
the size of the interpreter.
This patch ports the relevant patches to the python3 package, and adds a
new patch to remove the idle3 IDE as well from the interpreter.
Fixes#5696
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Python3 changes the pyc lookup strategy, ignoring the
__pycache__ directory if the .py file is missing. Change
install location to enable use of .pyc without their parent .py
See http://www.python.org/dev/peps/pep-3147
[Peter: add patch header]
Signed-off-by: Daniel Nelson <daniel@sigpwr.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
(untested)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes#5690
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes#5702
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
