Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366606
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d344ffe624 (configs/rock5b: add hash for custom uboot)
explicitly noted that the kernel was retrieved from a git-clone, so the
sha1 of the commit was enough to get what we expect.
However, that does not account for the fact that the upstream repository
can disapear or be temporarily unavailable (maliciously or not). In that
case, the kernel archive will be looked up on the backup mirror.
In that case, the download is via wget over https, which protects the
transport, but does not guarantee that the remote server serves the
expected archive.
The hash file was dropped when d344ffe624 was applied; restore it.
Since the defconfig now has hashes for all its downloads, enforce
checking hashes.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The defconfig uses a custom uboot version, downloaded with wget, so we
weant to be sure that it does not get modified on the server, so we add
a hash for it.
The kernel we get from a git clone, so the sha1 of the commit is enough
to be sure that what we get is what we expect (because we do a local
tarball out of a git clone).
Since we only get a hash for uboot and not for the kernel, we don't
enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the zynq readme.txt to add documentation for the zc702 and correct
documentation that was no longer up to date.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it to
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6021f3678b.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
6021f3678b (board/raspberrypi: handle dtb overlays for all variants);
the commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without this patch, the devicetree used by linux at runtime is
the u_boot devicetree.
While using rusticl on the khadas vim3 board with the default
extlinux.conf, mesa's panfrost driver return "gpu shed timeout"
errors. Adding "devicetree /meson-g12b-khadas-vim3.dtb" to the
extlinux.conf file solve the problem. Linux successfully boot
with and without the change but without this patch the devicetree
used by linux at runtime is the u-boot devicetree.
The differences between the u-boot devicetree and the linux
devicetree are:
-The u-boot devicetree contains two more nodes than the linux devicetree. Those nodes are:
- smbios : compatible option is set to "u-boot,sysinfo-smbios".
- __symbols__ : present if -@ or --symbols is used during the devicetree compilation.
-Most of u-boot devicetree nodes have a "phandle" property.
-SoC and vpu have a "u-boot,dm-pre-reloc;" property.
-Some aliases are different.
-The u-boot operating points tables contains more nodes.
The size difference between the u-boot devicetree and the linux
devicetree is approximately 3.5kB.
During runtime, the linux devicetree have the "phandle" and
"u-boot,dm-pre-reloc;" properties and the smbios node. So,
The runtime devicetree is the one from u-boot.
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 27bf08e4ad (configs/avenger96_defconfig: bump ATF version to 2.9
for binutils 2.39+ support) bumped TF-A, but it unfortunately does not boot
and instead dies with a panic:
NOTICE: CPU: STM32MP157AAC Rev.B
NOTICE: Model: Arrow Electronics STM32MP157A Avenger96 board
ERROR: nvmem node board_id not found
INFO: PMIC version = 0x10
ERROR: Product_below_2v5=1:
ERROR: HSLVEN update is destructive,
ERROR: no update as VDD > 2.7V
PANIC at PC : 0x2fff086f
Exception mode=0x00000016 at: 0x2fff086f
Instead use v2.5 to match the other stm32mp1 boards and use the same E=0
-Werror workaround. The avenger95 support is unfortunately broken since
v2.3 with the introduction of authentication support, so add a patch to the
DTS to fix that.
Notice that the authentication support was reworked in v2.7 so it is skipped
for the mp157a variant used on the avenger96, so the patch is not upstreamable.
While we're at it, also drop the debug option for consistency with the other
boards.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching bump Linux version to 6.1.57 and U-Boot version to
2023.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching bump Linux version to 6.1.57 and U-Boot version to
2023.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also, since with Linux commit [1] it's been defined the mmc* order
making sd-card number to be 1 instead of 0. This prevent to boot from
mmc0 with Linux version 5.10+ so let's change mmcblk0p4 to mmcblk1p4 in
extlinux.conf in order to boot since we bump to Linux 6.5.7
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0011c6d182774fc781fb9e115ebe8baa356029ae
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Qemu 6.0.0, a warning appear in the log if a short-form boolean
option is used. This was fixed by Romain for the main cmdline description
(see 04afe86cd7 ("board/qemu/arm-vexpress-tz: use enable=on")) but was
not updated in the alternate cmdlines for when using a dual console or
a GDB debug setup.
By the way, fix description mentioning qemu-system-arm command line option
-S that is an uppercase S, not a lower case s.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the LicheePi Nano with mainline components:
- U-Boot 2023.04
- Linux 6.5.9
Board homepage and more usable WiKi:
- https://wiki.sipeed.com/hardware/en/lichee/Nano/Nano.html
- https://linux-sunxi.org/LicheePi_Nano
linux.fragment is required to disable some features in order to keep the
kernel size small, otherwise the board does not boot due to limited
memory. See note in readme.txt.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr:
- use fixed kernel version
- use manufacturer directory
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Group files for board licheepi_zero under the existing manufacturer
directory, like all the other boards by Sipeed.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr: use the manufacturer sub-dir]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This fixes a typo by dropping off the spurious x in ensure.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
am62x_sk_defconfig should be ti_am62x_sk_defconfig
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add defconfig for the Khadas VIM3 board which uses a A311D SoC with a 4x
ARM Cortex-A73 + 2x ARM Cortex-A53 big.LITTLE architecture.
This defconfig includes the Linux mainline kernel version 6.3 as well as
mainline uboot version 2023.04 with an in-tree .dts and uboot-defconfig.
It also includes the host-tool amlogic-boot-fip which is necessary for
signing the bootloader. This host tool is used in the post-image.sh script
in order to generate the signed binary.
This binary is then flashed to the final sdcard.img after it is
generated using genimage. It is done in this way because the bootloader
image needs to be flashed in 2 steps. First the first 444 bytes need to
be flashed to the beginning of the sdcard.img, then we need to skip 68 bytes
in the source and the destination and then write the remaining
bootloader image to the sdcard.img.
Ref: http://docs.khadas.com/products/sbc/vim3/development/create-bootable-tf-card
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y
add BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
add BR2_PACKAGE_HOST_DOSFSTOOLS=y for genimage vfat support
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The post-image.sh script is used in several STM32MP157-based board
configs. It had hardcoded device tree file names for the supported
boards which were used for matching the expected TF-A binary name.
Replace this mechanism with a pair of grep and sed that build the TF-A
binary name from the device tree file name. For example, if
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES contained
DTB_FILE_NAME=stm32mp157c-dk2.dtb, the appropriate TF-A file would be
named tf-a-stm32mp157c-dk2.stm32.
Since the Bash Here Strings are removed with this change, I took the
opportunity to remove the only other non-POSIX command, "local", and
then I was able to change the shebang to plain /bin/sh, with -eu for
simpler error handling.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the linux-imx kernel to be aligned with the NXP BSP
LF6.1.22_2.0.0 (same release used in meta-freescale [1]).
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since they are new dependencies for building mkeficapsule u-boot tool.
The uboot-imx doesn't use the default imx8mp-evk devicetree anymore due
to commit [2]:
"Change to use imx8mp-evk-revb4.dtb and imx8mp-ddr4-evk-revb4.dtb
as default kernel DTB for iMX8MP re-design EVK board. Old EVK
board is EOL, to boot old EVK, user can switch to old DTB manually."
Since the freescale_imx8mpevk_defconfig only install imx8mp-evk.dtb in
the final image, the boot stop with:
Booting from mmc ...
Failed to load 'imx8mp-evk-revb4.dtb'
WARN: Cannot load the DT
Add a u-boot defconfig fragment to revert this change [2] and use the
imx8mp-evk.dtb by default.
Runtime tested on i.MX 8M Plus EVK REV B2.
[1] e6b1b6725c
[2] a60e787a6e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Bananapi M2 Berry board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When testing the virt machine with EDK2, the buildroot 6.1 kernel
will not boot as it has no base ACPI support. Whilst you can run
qemu with the -no-acpi option, it would help if basic ACPI support
was there as otherwise there is no output from the kernel post the
ACPI BIOS initialisation.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have a template generating an equivalent genimage configuration.
The generated genimage is identical to these +/- file ordering and a
trailing comma / newline that is ignored by genimage, E.G. for rpi3-64:
@@ -8,9 +8,10 @@
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
"rpi-firmware/overlays",
- "Image"
+ "rpi-firmware/start.elf",
+ "Image",
+
}
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi genimage configurations are all identical, except for the boot
partition files, which include:
- Device tree files (*.dtb)
- rpi-firmware files (rpi-firmware/*)
- Kernel image (Image/zImage)
All of these are quite simple to figure out programmatically based on the
content of BINARIES_DIR, so extend post-image.sh to fall back to generating
a genimage configuration based on genimage.cfg.in if a board specific one
does not exist.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Old links are no longer working, so use new links instead.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Old link is no longer working, so use new link instead.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport an upstream patch fixing the build with binutils >= 2.38
for riscv's for Zicsr and Zifencei.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4987456149
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.4.3
- Bump U-Boot to 2023.07.02
- Bump TF-A to v2.9
While at it, tune the documentation:
- Increase the amount of memory in the example commands to help run the
largest OS distributions.
- Update the link to the IR Guide to point at the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hss-payload-generator cannot find where u-boot.bin is when looking
for it using the config.yaml. Update syntax issues and working
directories. Fix the post image script to allow an image to get built.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
