Sadly the most recent version of Microchip's SAM-BA programming tool is no longer hosted
on GitHub. Therefore the package is downloaded from Microchip directly.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mips_32 is not supported by ffmpeg and it tries to build with loongson3
SIMD support that leads to build failure due to:
/tmp/ccFO2LRa.s: Assembler messages:
/tmp/ccFO2LRa.s:15314: Error: opcode not supported on this processor: mips32 (mips32) `dmult $2,$6'
/tmp/ccFO2LRa.s:15316: Error: opcode not supported on this processor: mips32 (mips32) `dsrl $2,$2,32'
So let's --disable-asm to prevent using those unsupported opcodes for every
mips architecture according to Arnout.
Fixes:
http://autobuild.buildroot.net/results/f01/f01d9cedec8e1b371308d0f7af561a75883fa27c/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Compiling on Ubuntu 20.04 generates this:
./util.c: In function ‘file_write_dep’
./util.c:54:18: warning: ‘..config.tmp’ directive writing 12 bytes into a region of size between 1 and 4097 [-Wformat-overflow=]
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~
./util.c:54:2: note: ‘sprintf’ output between 13 and 4109 bytes into a destination of size 4097
54 | sprintf(buf, "%s..config.tmp", dir);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and similar warnings on confdata.c, lines 778, 989, 995, 1000, 1007,
1040, 1046 and 1054. Avoid the warnings by enlarging the destination
buffer of fprintf().
Normally, we want changes to kconfig to be reflected by patches in
support/kconfig/patches. This makes it easier to resync with upstream
kconfig. However, in this case, everything that is changed here is
already changed completely (and differently) upstream, so there is no
added value in keeping the patch.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
wpa_supplicant defconfig doesn't enable CONFIG_MESH
by default, and currently there is only a path to
disable it in buildroot. This patch will restore
the logic to enable it.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Acked-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to syslog-ng-3.34.1. Drop patch that has been applied upstream.
Update version in config file.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update to the latest version of the PRU software support [1]. Compared
with v5.8.0, there aren't code or license changes, just some extra
release notes.
[1] https://git.ti.com/cgit/pru-software-support-package/pru-software-support-package
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With some toolchains (e.g. mips64el), partial linking fails in the
following way:
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: build/release/libmupdf.a(Dingbats.cff.o): ABI is incompatible with that of the selected emulation
/tmp/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/8.4.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: failed to merge target specific data of file build/release/libmupdf.a(Dingbats.cff.o)
Taking inspiration from commit
9eca4b9f84, fix it by using GCC instead
of LD for partial linking.
Note that on mips the build will now produce warnings similar to this
one:
buildroot/output/host/lib/gcc/mips64el-buildroot-linux-gnu/10.3.0/../../../../mips64el-buildroot-linux-gnu/bin/ld: build/release/libmupdf.a(NotoSansTaiTham-Regular.ttf.o): warning: linking abicalls files with non-abicalls files
During a runtime test on mips64el under qemu, mupdf-x11 was
nonetheless able to display a sample PDF file correctly.
Fixes:
- http://autobuild.buildroot.net/results/156fe9ee5f6dccdc98990f6c5de5562383bc2b74/
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pacakge doesn't support python2 anymore. Therefore, we can remove
host-python3-decorator and add a host variant for python-decorator.
As a consequence of that, the python-networkx dependency was renamed from
host-python3-decorator to host-python-decorator.
In addition, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* The package doesn't support python2 anymore.
* Hence, python-simplelogging now depends on python3.
* License was updated with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* License was updated with a year bump.
* Indent with two spaces on the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Plus, indent with two spaces on the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure with musl raised since bump to version
1.18 in commit 1a7be12e1e:
src/netconfig.c: In function 'netconfig_ipv6_to_string':
src/netconfig.c:188:18: error: 'struct in6_addr' has no member named '__in6_u'; did you mean '__in6_union'?
188 | memcpy(in6_addr.__in6_u.__u6_addr8, addr, 16);
| ^~~~~~~
| __in6_union
Fixes:
- http://autobuild.buildroot.org/results/2c4e6cf22e6fb5582470930241904878070f1144
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Fix CVE-2021-41054: tftpd_file.c in atftp through 0.7.4 has a buffer
overflow because buffer-size handling does not properly consider the
combination of data, OACK, and other options.
- Update hash of license file (license replaced with current version of
the GPL text:
bf22ccaef3)
https://sourceforge.net/p/atftp/code/ci/v0.7.5/tree/Changelog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release Notes:
```
This release was focused on stability and hardening, notably fixing some
long-standing race conditions and memory leaks. Default mount options got
tweaked towards data safety.
All users are strongly advised to upgrade.
```
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to version 3.71.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python 2 support has been dropped since version 2.9 and
d956eaa3b1
resulting in the following build failure since bump to version 2.9.1 in
commit 09417e47d7:
File "setup.py", line 117
f"Unable to find 'pg_config' file in '{self.pg_config_exe}'")
^
Fixes:
- http://autobuild.buildroot.org/results/f8a2cf9eea500e2c617381840b849225f12b56f1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update unsupported testcases for musl (process.c has been removed in
this release)
* refresh 0001-lapi-Add-sysinfo.h-to-fix-build-with-MUSL-libc.patch
(unfortunately still needed, it'd be great to update all toolchains)
* Backport fix after this release:
- 3 patches for build fix on sourcery-arm
- functional fix from e42149e28 ("lib: fix MemAvailable parsing")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated COPYING file to remove the PLPA exemption (appendix 2)
With this change the license is now GPLv2 without any additional wording.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2021-3013 does not impact any buildroot versions of ripgrep as it is
a Windows-only exploit targeting ripgrep versions earlier than 13. It
can be safely ignored on our LTS branches.
https://nvd.nist.gov/vuln/detail/CVE-2021-3013
Signed-off-by: Sam Voss <sam.voss@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is only a runtime dependency, not a build dependency.
Based on a similar patch by James Hilliard for the wpewebkit
package.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is only a runtime dependency not a build dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Adrian perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* Update comment of reverse dependency
* Indent with two spaces in the hash file.
* License was changed with a year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: update comment of reverse dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update dependency list (added python-jedi).
* The package is python3-only, and not because of pygments, so
the comment after the "depends on" can be removed.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* The only reverse dependency, ipython, already depends on python3
* Update URL in Config.in.
* Indent with two spaces in the hash file.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr:
- actually add dependency on python3
- add note about ipython
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* The package doesn't support python2 anymore.
* The two reverse dependencies, crossbar and twisted, already depend on
python3
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: add note about crossbar and twisted]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
