This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security vulnerabilities:
CVE-2020-12695: The Open Connectivity Foundation UPnP specification before
2020-04-17 does not forbid the acceptance of a subscription request with a
delivery URL on a different network segment than the fully qualified
event-subscription URL, aka the CallStranger issue.
For details, see the advisory:
https://w1.fi/security/2020-1/upnp-subscribe-misbehavior-wps-ap.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect
indication of disconnection in certain situations because source address
validation is mishandled. This is a denial of service that should have
been prevented by PMF (aka management frame protection). The attacker
must send a crafted 802.11 frame from a location that is within the
802.11 communications range.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hostapd TEAP support fails to build when internal TLS implementation
is selected. TEAP is still an experimental feature that is not
recommmended for production use. Currently it should not be used for
anything else than experimentation and interoperability testing.
Disable TEAP when internal TLS implementation is selected. Those
who needs experimenting with TEAP are encouraged to enable openssl
in their buildroot configuration.
Fixes:
http://autobuild.buildroot.net/results/f88/f880b1a430ebd6f97885103a622f1a4d9ec6de3a
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Hostapd v2.9 follows the approach taken by bridge-utils and attempts
to use new bridge ioctls whenever possible. New bridge calls are
enabled in hostapd build using NEED_LINUX_IOCTL configuration option.
That switch is enabled for all the practical configurations excluding
wired driver. However it is required to support dynamic VLANs in
any configuration.
Enable NEED_LINUX_IOCTL hostapd configuration option whenever
dynamic VLANs support is requested in buildroot.
Fixes:
http://autobuild.buildroot.net/results/71a/71aa92578622a266b4bed92b66a65438bc32cbd6
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
New hostapd v2.9 supports WPA3 features such as OWE, SAE, DPP.
Those features are disabled by default in defconfig, so no
dependency from openssl is requried unless WPA3 support
is enabled.
This patch adds Config.in option for WPA3 support in hostapd.
When this option is selected, libopenssl is also selected and
WPA3 features including OWE, SAE, DPP are enabled in hostapd
.config file. When this option is deselected, then WPA3
options are disabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
After hostapd update to 2.9, the patch provided no longer works,
although applies. Moreover, AP support for Realtek chips is broken
anyway in kernels > 4.9.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
[Thomas: add Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
hostapd 2.7 added compile time options to include
redirecting the output from stdout to a file or syslog
like wpa_supplicant
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security vulnerabilities:
EAP-pwd implementation in hostapd (EAP server) and wpa_supplicant (EAP
peer) was discovered not to validate fragmentation reassembly state
properly for a case where an unexpected fragment could be received. This
could result in process termination due to NULL pointer dereference.
For details, see the advisory:
https://w1.fi/security/2019-5/eap-pwd-message-reassembly-issue-with-unexpected-fragment.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use pkg-config to find openssl dependencies such as lz or latomic
Fix build on sparc v8 (even if there is no autobuilder failures yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security vulnerabilities:
- CVE-2019-9494 (cache attack against SAE)
For details, see the advisory:
https://w1.fi/security/2019-1/sae-side-channel-attacks.txt
- CVE-2019-9495 (cache attack against EAP-pwd)
For details, see the advisory:
https://w1.fi/security/2019-2/eap-pwd-side-channel-attack.txt
- CVE-2019-9496 (SAE confirm missing state validation in hostapd/AP)
For details, see the advisory:
https://w1.fi/security/2019-3/sae-confirm-missing-state-validation.txt
- CVE-2019-9497 (EAP-pwd server not checking for reflection attack)
- CVE-2019-9498 (EAP-pwd server missing commit validation for scalar/element)
- CVE-2019-9499 (EAP-pwd peer missing commit validation for scalar/element)
For details, see the advisory:
https://w1.fi/security/2019-4/eap-pwd-missing-commit-validation.txt
Notice that SAE is not currently enabled in Buildroot, but the patches are
included here anyway for completeness.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added license hash, removed patches included in new version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Get rid of netlink dependency if the options selected allow that.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
[Thomas/Arnout: use a if BR2_PACKAGE_HOSTAPD_VLAN .. endif block.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to hostapd's defconfig file, ACS is currently only supported
through the nl80211 driver. Search through the source code also confirms
that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an
attempt to use ACS with other drivers by setting a wireless channel to 0
results in a runtime failure (driver doesn't accept this value). So we
might save a user from selecting a meaningless combination by making ACS
dependent on nl80211.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the wired driver. Add configuration options to select
which drivers to build. Select DRIVER_NONE if no other drivers enabled
(this may be the case when building hostapd as a standalone RADIUS
server).
Update makefile logic and apply wireless-specific options only if at
least one wireless driver enabled. Otherwise, an attempt to build a
wired-only or RADIUS-only hostapd will fail.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add configuration options for hostapd to select which kind
of VLAN support to build.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed HOSTAPD_PATCH= to HOSTAPD_PATCH+= to keep previously added
patches.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since kernel drivers for Realtek wireless chips use non-standard
interfaces, upstream hostapd does not support them. One have to apply
an external patch for hostapd to work with these chips. See:
https://github.com/pritambaral/hostapd-rtl871xdrv
A configuration option is added to enable support for Realtek chips,
and it's turned off by default.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd project URL has been changed to w1.fi/hostapd.
The old domain epitest.fi has expired.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove all patches as they are applied to or were fetched from upstream.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For convenience it's nice to have default hostapd.conf installed
on target automatically as a good starting point.
Otherwise user has to create it manually from scratch.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>i
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch fixing CVE-2016-2447: psk configuration parameter update
allowing arbitrary data to be written.
See http://w1.fi/security/2016-1/psk-parameter-config-update.txt for details.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
hostapd is licensed under BSD-3c only and not dual licensed.
Quoting from COPYING file
This software was previously distributed under BSD/GPL v2 dual license
terms that allowed either of those license alternatives to be
selected. As of February 11, 2012, the project has chosen to use only
the BSD license option for future distribution. As such, the GPL v2
license option is no longer used.
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make ACS (Automatic Channel Selection) support in hostapd optional.
There's a clash of standard vs. propietary solutions, hence when hostapd
has builtin ACS support (standard) and it's enabled (channel=0 in the
config) this will preclude the propietary driver from using ACS (it
won't work at all).
See:
http://e2e.ti.com/support/wireless_connectivity/f/307/p/465333/1669270
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that IPv6 is mandatory remove package dependencies and conditionals
for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Drop upstream patch.
CONFIG_IEEE80211W is now enabled by default.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#7166
hostapd crashes with segfault when using RT5370. This is because the driver
reports Beacon RX prior to hostapd having completed the AP mode setup.
This upstream commit fixes it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A rebase of Samuel Martin's http://patchwork.ozlabs.org/patch/312320/
hostapd doesn't use pkg-config and upstream likely wouldn't take a patch
to do so (hostapd/wpa_supplicant are used in android builds, and it
doesn't use any auto* stuff either) so pass it in LIBS since we
always build openssl with libz support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rework .config file editing as was done for wpa_supplicant and bump to
version 2.1 which includes 802.11ac and ACS support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libnl-3 uses threads and this isn't accounted for in hostapd (or
libnl-3*.pc files for that matter - hostapd doesn't use pkg-config
anyway).
Since linking order matters for static scenarios also throw in -lnl-3
into LIBS first since it gets appended to in hostapd makefiles to add
libnl-3.
Fixes:
http://autobuild.buildroot.net/results/d4a/d4a9f44effeb08eda6c4b32764274ae81d185d5e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
