And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested by Arnout during the review [1], we can assume that U-Boot
needs ti-k3-boot-firmware when it is selected (likely by
ti-k3-r5-loader).
We can remove BR2_TARGET_UBOOT_NEEDS_TI_K3_BOOT_FIRMWARE without
legacy handling since this option is not part of any Buildroot
release.
[1] http://lists.busybox.net/pipermail/buildroot/2024-April/689263.html
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As asked by Romain. Armadeus boards share same Linux hashes.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. As asked By Romain.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch doesn't introduce any functional changes but reorganizes the
code to prevent the execution of the commands:
make ti_am62x_sk_defconfig
make savedefconfig
from showing a change in the defconfig.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Wireless regulatory database lists the allowed radio frequencies for
each local jurisdiction. Since linux-4.15 the kernel supports loading
the files regulatory.db/regulatory.db.p7s directly from the
/lib/firmware directory. Currently this package is not enabled and
kernel complains with the following message on every boot:
"""
platform regulatory.0: Direct firmware load for regulatory.db failed
with error -2
cfg80211: failed to load regulatory.db
"""
Add wireless regulatory database package to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for the Star64 board made by
Pine64. This board is based on the Starfive JH7110 RISC-V 64 bits
SoC. See: https://wiki.pine64.org/wiki/STAR64.
This patch uses a custom Kernel and U-Boot made for this board. The
SPL has to be signed with the Starfive SPL-Tool which is a software
provided by the vendor to get the necessary headers on the SPL.
The image configuration is based on the work done by Ivan Velickovic
<i.velickovic@unsw.edu.au>.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the switch to binutils 2.41 as default version [1], the arm Linux
kernel build is broken with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 5.10 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
[1] e88225ed88
[2] a1ce9474e4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6655119386
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Romain:
- improve commit log
- Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since the switch to binutils 2.41 as default version [1], the arm Linux
kernel build is broken with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 5.10 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
[1] e88225ed88
[2] a1ce9474e4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6655119389
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Romain:
- improve commit log
- Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since the switch to binutils 2.41 as default version [1], the arm Linux
kernel build is broken with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 5.10 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
[1] e88225ed88
[2] a1ce9474e4
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6655119384
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Romain:
- improve commit log
- Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Builds the spi-nor.img together with the sdcard.img.
Readme is extended with SPI NOR flash writing instructions
and recovery.
The spi-nor.img layout is based on the following document:
https://doc-en.rvspace.org/VisionFive2/Boot_UG/JH7110_SDK/boot_address_allocation.html
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
[Arnout: extend readme.txt with paragraph that either boot mode works.]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The configuration is based on defconfig from starfive's kernel fork [1].
[1] 076ede06c0/arch/riscv/configs/starfive_visionfive2_defconfig
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Adjust DTS_NAME to current kernel source tree location of DTs in
per-vendor directories.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6665749909
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The D1 support is now in mainline, so use that instead. There is no
dedicated nezha defconfig, so use the riscv defconfig. This defconfig has
most drivers as modules, so add mdev to ensure they get correctly loaded.
The defconfig does not have USB gadget/OTG support, so enable that using a
config fragment to make the USB-C connector work and get rid of the
following warning:
[ 7.233418] musb-sunxi 4100000.usb: Invalid or missing 'dr_mode' property
[ 7.240330] musb-sunxi: probe of 4100000.usb failed with error -22
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
From Andreas Dannenberg (TI K3 architect) [1]:
"HS-FS should be the default for all TI AM6x devices. This is our
"production silicon" and what's used for (almost) all projects,
especially new projects. This being said having support for GP device
variants still is desirable for existing boards/projects, such as the
current BeaglePlay boards (amongst earlier version of TI starter kit
EVMs for AM6x)."
See further details on e2e Forum [2]:
"Unfortunately with this transition any existing GP device based AM62x
(and AM64x) boards will no longer boot with MMC/SD card images generated"
For such existing GP device based AM62x (and AM64x) boards, users have
to provide the tiboot3.bin name using BR2_TARGET_TI_K3_R5_LOADER_TIBOOT3_BIN.
[1] http://lists.busybox.net/pipermail/buildroot/2024-February/685821.html
[2] https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1210443/faq-am625-generating-sitara-am62x-am62ax-am64x-gp-device-bootable-mmc-sd-card-images-using-sdk-v8-6-and-yocto
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Since all AM62 and AM64 defconfig has been updated to use binman
and ti-k3-image-gen has been removed, binman is now mandatory
for all TI K3 SoC. So remove BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN
option since since it can't be disabled anymore.
We can remove BR2_TARGET_TI_K3_R5_LOADER_USE_BINMAN without
legacy handling since this option is not part of any Buildroot
release.
While at it, add one more like to binman dependencies in comments.
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 2024.01 version of U-Boot for the am64x-sk board has introduced two
major changes:
- The device tree k3-am642-sk.dtb is no longer searched in /boot, but in
/boot/dtb/ti. Hence, the disabling of BR2_LINUX_KERNEL_INSTALL_TARGET
and the use of extlinux.conf for the proper loading of the device tree.
Furthermore, the parameter BR2_ROOTFS_POST_SCRIPT_ARGS was used to
auto-generate the extlinux.conf file so that developers can change the
kernel loading options by modifying the .config.
- U-Boot is capable of building tiboot3.bin using Binman. So it's no longer
necessary to use custom tools like ti-k3-image-gen.
- Use a custom tiboot3.bin since the default is "hs-fs",
but the ti_am64x_sk_defconfig expect the "gp" one.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Tested-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The patch makes it clear that the moved script can be used by the
am6{2,4}x platforms.
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Removing any explicit reference to the ti_am62x_sk_defconfig
configuration, the script can also be used by other configurations or at
least by ti_am64x_sk_defconfig.
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 2024.01 version of U-Boot for the am62x-sk board has introduced two
major changes:
- The device tree k3-am625-sk.dtb is no longer searched in /boot, but in
/boot/dtb/ti. Hence, the disabling of BR2_LINUX_KERNEL_INSTALL_TARGET
and the use of extlinux.conf for the proper loading of the device tree.
Furthermore, the parameter BR2_ROOTFS_POST_SCRIPT_ARGS was used to
auto-generate the extlinux.conf file so that developers can change the
kernel loading options by modifying the .config.
- U-Boot is capable of building tiboot3.bin using Binman. So it's no longer
necessary to use custom tools like ti-k3-image-gen.
- Use a custom tiboot3.bin since the default is "hs-fs",
but the ti_am62x_sk_defconfig expect the "gp" one
Tested on SK-AM62B-P1.
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Tested-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Tested-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
BR2_TARGET_UBOOT_NEEDS_TI_K3_DM option has been introduced initially to
support certain TI K3 devices such as AM62x and AM62Ax that require a
Device Manager (DM) firmware.
This option needs to be renamed to use a more generic name in order
to cover further TI K3 SoCs support along with the new u-boot binman
tool that will be added in followup patch. With binman enabled in
u-boot on TI K3 SoC, ti-k3-boot-firmware is needed at buildtime to
provide ti-sysfw (System Firmware) for all TI K3 SoC along with Device
Manager (DM) firmware for AM62x and AM62Ax devices.
With binman support enabled, we don't need to provide the path of the
Device Manager firmware anymore (see [2]).
We can remove DM="<DM firmware>.xer5f" from UBOOT_MAKE_OPTS.
It also means that we can also remove BR2_TARGET_UBOOT_TI_K3_DM_SOCNAME
used to define DM path.
DM=$(BINARIES_DIR)/ti-dm/$(UBOOT_TI_K3_DM_SOCNAME)/ipc_echo_testb_mcu1_0_release_strip.xer5f
For now, keep BR2_TARGET_UBOOT_TI_K3_DM_SOCNAME and DM only when
ti-k3-image-gen is used. We need to update ti_am62x_sk_defconfig
to use binman before removing them along with ti-k3-image-gen.
[1] 52ce606c05
[2] https://software-dl.ti.com/processor-sdk-linux/esd/AM62X/09_01_00_08/exports/docs/linux/Foundational_Components/U-Boot/UG-General-Info.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch removes the hash for version 2022.10 of ti-k3-r5-loader
(i. e. U-Boot). Instead, it is added to a custom hash file in the
global patch dir of the ti_am6{2,4]x_sk_defconfig configurations.
Link: https://patchwork.ozlabs.org/project/buildroot/patch/20240304153253.732708-6-dario.binacchi@amarulasolutions.com
Suggested-by: Yann E. Morin <yann.morin.1998@free.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Necessary adaptations:
- The SD card is now called mmcblk1; adapt Linux boot command accordingly.
- The DTB is now under the allwinner/ folder.
- U-Boot needs OpenSSL to build.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/6544501111
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch upgrades the ATF version to the v2.8 LTS version. Please note
that due to DTS changes from upstream commit
51e223058fe70b311542178f1865514745fa7874 ("feat(stm32mp15-fdts): add
Avenger96 board with STM32MP157A DHCOR SoM") The ATF additional build
variable is also modified to use the new DTS file. Note that the old DTS
file still exists, but no longer works.
Furthermore, the 'E=0' flag is removed from ATF additional build
variable. It was added by commit
deb8d71c92 to avoid TFA build
failure because of '-Werror' flag. However, from version v2.6 or later,
it is not required anymore, the compiler warning was fixed.
The ATF patch
"board/arrow/avenger96/patches/arm-trusted-firmware/
0001-stm32mp157a-avenger96.dts-enable-hash-device-to-unbr.patch" also
has been removed. As it was not required due to using the new dhcore DTS
file for the ATF build.
Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
[Arnout: switch to
BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION instead of custom
lts-v2.8.16]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This patch upgrades Kernel version to 6.6.22 LTS on avenger96 board.
Beside that, In accordance with the kernel 6.5rc1 commit
724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
the device tree path also has been modified to point the device tree in
the proper location.
As another change, due to commit 3108eb2e8aa7
("mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS"), the order of SD card and
eMMC probing has swapped. The SD card is now mmcblk0 instead of
mmcblk1. Thus, the default root append (mmcblk1p4) in 'extlinux.conf'
file in the overlay directory of the board is changed, otherwise the
rootfs was not possible to be detected.
Signed-off-by: Javad Rahimipetroudi <javad.rahimipetroudi@mind.be>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Enables U-Boot and required OpenSBI builds for the VisionFive2. Changes
the sdcard.img to use GPT and adds the SPL and U-Boot to partitions
specified in U-Boot's documentation for the board:
https://docs.u-boot.org/en/v2024.01/board/starfive/visionfive2.html
U-Boot config uses BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME with value
"u-boot.itb". Using BR2_TARGET_UBOOT_FORMAT_ITB fails, because the
build does not support u-boot.itb make target.
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
[Peter: document boot mode setting, add U-Boot documentation link]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set correct directory for the BR2_ROOTFS_POST_SCRIPT_ARGS.
Signed-off-by: Lukasz Tekieli <tekieli.lukasz@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the ti-k3-r5-loader, so do that now.
When the defconfig was added, the default version was 2022.10, so use it.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig") forgot to
specify the ti-k3-r5-loader, so do that now.
When the defconfig was added, the default version was 2022.10, so use it.
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am64x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am64x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Using PLATFORM=k3 can leads to a runtime boot crash on some K3 SoC (e.g.
j721e) because the optee flavor is missing.
We could use BR2_TARGET_OPTEE_OS_PLATFORM=k3 and
BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR=am62x but we actually can use
BR2_TARGET_OPTEE_OS_PLATFORM=k3-am62x as explained in the optee-os
Makefile [1]:
# If $(PLATFORM) is defined and contains a hyphen, parse it as
# $(PLATFORM)-$(PLATFORM_FLAVOR) for convenience
This is how meta-ti set the optee-os platform:
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti uses the OPTEEMACHINE to set optee-os platform [2].
[1] https://github.com/OP-TEE/optee_os/blob/4.0.0/Makefile#L37
[2] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
Suggested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump the kernel version to 6.6.21.
Also pass the nxp/imx/ path due to the devicetree reorganization
in kernel 6.6.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Passing ip=dhcp to the kernel will cause it to try to configure the network
interface using DHCP and wait up to 120s for the interface to detect a link,
slowing down boots without a network cable a lot.
Instead use the "normal" BR2_SYSTEM_DHCP, E.G. trigger ifup to run the DHCP
client in the background.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel build now requires FIT support in mkimage:
ITB arch/mips/boot/vmlinux.gz.itb
/home/peko/source/buildroot/output-ci20/host/bin/mkimage: unsupported type Flat Device Tree
So enable that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We carried a patch for xilinx xemaclite that was made initially for
qemu < 2.2.0 [1].
Indeed, between Qemu 0.11.0 and 2.2.0 the devicetree binary blob
petalogix-s3adsp1800.dtb (bundled in Qemu sources) used a
compatible string 'xlnx,xps-ethernetlite-2.00.b' that was not
supported by the Linux kernel [2].
These patches could have been removed since Buildroot 2015.02
when this defconfig was tested with Qemu 2.2.0 [3].
[1] https://git.buildroot.net/buildroot/commit/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch?id=fa2798548368d51998fad18d7f6d1ae0ed065b33
[2] c21fd2c79e
[3] 312990555c
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Peter: drop drom .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update U-Boot to version 2024.01 and kernel to 6.6.12.
In kernel 6.6 the arm32 i.MX device trees were placed into the
nxp/imx kernel directory, so adapt accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the AVNET RZBoard V2L.
The board support creates a bootable sd card image. The board is
shipped with a u-boot inside its eMMC. The board support uses this
u-boot and does not build and deploy a u-boot onto the sd card.
Instead the sd card only contains a uEnv.txt, a kernel image and the
rootfs.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package/busybox/busybox-minimal.config is the default configuration
for MMU-less systems, so the setting is redundant and can be removed
without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6b2329bb80 ("configs/ti_am64x_sk: new defconfig") forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfig choice is the default one, so it is redundant and can be
removed without effect.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Commit 4b8fddb060 ("configs/ti_am62x_sk: new defconfig) forgot to
specify the Linux kernel version, so do that now.
When the defconfig was added, the default version was 6.4.x, so use
version 6.4.16.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Romain:
use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_4 as suggested
by Giulio Benetti]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
uImage is almost deprecated so let's switch to zImage. Let's also bump
Linux version to 6.1.44, U-Boot to 2023.07 and remove
BR2_TARGET_UBOOT_NEEDS_PYTHON3 since it's selected by
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The custom kernel used for the Rock5B features an FIQ debug
interface which is enabled by default. As it is not needed, it is
disabled. The documentation features instructions on how to
re-enable it, if it is needed.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The assumption is that updates to the stable branch should not break anything,
so we use the latest LTS rather than a specific version.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- v2.6 changes to FIP instead of SSBL boot.
- This requires switching to u-boot.bin in U-Boot, and using that
instead of .stm32 in ATF.
- fiptool expects dtb to be split off from u-boot.bin, so need custom
u-boot-nodtb.bin in addition to u-boot.dtb.
Caveat: this is perhaps not really obligatory, but the ATF
documentation explains it like that.
- The partition must be named fip (while it must be named ssbl for
SSBL boot).
- Since the partition name is set in the common template, all
defconfigs using that template must be bumped in a single commit
- ATF now produces both fip.bin and <boardname>.stm32, so fip.bin has
been added to the configs
- While we're at it, add the structuring comments to
avenger96_defconfig similar like the other defconfigs
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.6.11
- Bump U-Boot to 2024.01
- Bump TF-A to v2.10
While at it, adapt Qemu command line arguments to avoid a warning when
disabling ACPI.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 78e8f383 "configs/imx8mmpico: bump bsp components to version
tn-kirkstone_5.15.71-2.2.0" bumped components, but forgot to add
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y.
This commit adds it to the defconfig to fix the build.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180248
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1166:12: fatal error: openssl/evp.h: No such file or directory
1166 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adjust the include path for the device tree. Since Linux 6.5-rc1
(724ba67515 "ARM: dts: Move .dts files to vendor sub-directories"),
sama5d31.dtsi lives in the microchip subdirectory.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build
error:
include/image.h:1394:12: fatal error: openssl/evp.h: No such file or directory
1394 | # include <openssl/evp.h>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/5858180070
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-By: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump version of Linux to 6.6.14 and U-Boot to 2024.01
and also use upstream configs and dts.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is now support in both upstream U-Boot and upstream Linux.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imxrt1050-evk was using uImage switch to using zImage
now.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 6.7 and U-Boot to 2024.01
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with kernel release v6.5 ARM DTS files are placed in vendor
subdirectories (Linux commit 724ba6751532 ("ARM: dts: Move .dts files to
vendor sub-directories")).
This fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm4708-smartrg-sr400ac.dtb] Error 2
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm47094-luxul-xwr-3150-v1.dtb] Error 2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366606
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux defconfig 'bb.org_defconfig' is the best for beagleboard.
To load compressed kernel modules, kmod and xz packages are needed
because busybox doesn't support it.
Bump U-Boot to version 2023.10. The uboot-tools package is no need.
Tested on beaglebone black.
[1] https://github.com/beagleboard/linux/releases/tag/6.1.46-ti-r13
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d344ffe624 (configs/rock5b: add hash for custom uboot)
explicitly noted that the kernel was retrieved from a git-clone, so the
sha1 of the commit was enough to get what we expect.
However, that does not account for the fact that the upstream repository
can disapear or be temporarily unavailable (maliciously or not). In that
case, the kernel archive will be looked up on the backup mirror.
In that case, the download is via wget over https, which protects the
transport, but does not guarantee that the remote server serves the
expected archive.
The hash file was dropped when d344ffe624 was applied; restore it.
Since the defconfig now has hashes for all its downloads, enforce
checking hashes.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it to
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux 6.1 has been marked LTS for a long time now. Time to bump
Linux for RaspberryPi's to the latest 6.1.61 Since April 2022
the RaspberryPi defconfigs have compressed kernel module enabled
by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed
because busybox doesn't support it.
For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] c45b4223a4
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by: Bram Oosterhuis <dev@bybram.com>
Reviewed-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot requires pylibfdt, pyelftools and openssl so let's enable U-Boot
corresponding BR2_TARGET_UBOOT_NEEDS_*.
Rootfs is not big enough because of Linux modules size so let's extend it
to 120MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5551322041
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Zynq ZC702 starter kit.
ZC702 features can be found here:
https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump version of Linux to 6.1.61 and U-Boot to 2023.10.
U-Boot requires enabling pylibfdt and pyelftools
We need to increase the size of the rootfs, and we get rid of a
64bit warning on `mke2fs` by passing `-O 64bit` as an argument.
Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 27bf08e4ad (configs/avenger96_defconfig: bump ATF version to 2.9
for binutils 2.39+ support) bumped TF-A, but it unfortunately does not boot
and instead dies with a panic:
NOTICE: CPU: STM32MP157AAC Rev.B
NOTICE: Model: Arrow Electronics STM32MP157A Avenger96 board
ERROR: nvmem node board_id not found
INFO: PMIC version = 0x10
ERROR: Product_below_2v5=1:
ERROR: HSLVEN update is destructive,
ERROR: no update as VDD > 2.7V
PANIC at PC : 0x2fff086f
Exception mode=0x00000016 at: 0x2fff086f
Instead use v2.5 to match the other stm32mp1 boards and use the same E=0
-Werror workaround. The avenger95 support is unfortunately broken since
v2.3 with the introduction of authentication support, so add a patch to the
DTS to fix that.
Notice that the authentication support was reworked in v2.7 so it is skipped
for the mp157a variant used on the avenger96, so the patch is not upstreamable.
While we're at it, also drop the debug option for consistency with the other
boards.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit f20589cbc7 (configs/stm32mp157c_odyssey: new defconfig) forgot to
specify a fixed TF-A version, so do that now.
When the defconfig was added, the default version was v2.5 - So use that.
Similarly to the other stm32mp1 defconfigs, this needs disabling -Werror
with E=0 to fix a build issue with GCC >= 12.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2023.10 and kernel to version 6.6.
There was a change in the location of the devicetrees for arm32
platforms, so adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching bump Linux version to 6.1.57 and U-Boot version to
2023.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching bump Linux version to 6.1.57 and U-Boot version to
2023.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also, since with Linux commit [1] it's been defined the mmc* order
making sd-card number to be 1 instead of 0. This prevent to boot from
mmc0 with Linux version 5.10+ so let's change mmcblk0p4 to mmcblk1p4 in
extlinux.conf in order to boot since we bump to Linux 6.5.7
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0011c6d182774fc781fb9e115ebe8baa356029ae
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is failing with an unrecognised opcode error due to missing
`zicsr` extension requirement. This is introduced with GCC version 12.
When binutils was updated to v2.38 they updated to the default ISA spec
version 20191213. In this version the original i extension split into i,
Zicsr and Zifencei. A fix for this has been added since U-Boot version
2022.01 to detect new Zicsr and Zifencei extensions and enable it when needed
therefore, an updated U-Boot tag to our latest 2023.09 release will fix
this as in our latest release we have updated to U-Boot version 2023.07.
Update the kernel verion in line with the U-Boot release version to
ensure compatiblities and latest features and fixes are included.
Remove riscv_g selection as it is now selected by default.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 72c653367d (board/licheepi_zero: move board files to their own
directory) forgot to rename the defconfig file, even though the
readme.txt was updated.
Do the rename now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support for the LicheePi Nano with mainline components:
- U-Boot 2023.04
- Linux 6.5.9
Board homepage and more usable WiKi:
- https://wiki.sipeed.com/hardware/en/lichee/Nano/Nano.html
- https://linux-sunxi.org/LicheePi_Nano
linux.fragment is required to disable some features in order to keep the
kernel size small, otherwise the board does not boot due to limited
memory. See note in readme.txt.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr:
- use fixed kernel version
- use manufacturer directory
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Group files for board licheepi_zero under the existing manufacturer
directory, like all the other boards by Sipeed.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr: use the manufacturer sub-dir]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynq_microzed_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30
- U-Boot v2023.01 with additional bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add defconfig for the Khadas VIM3 board which uses a A311D SoC with a 4x
ARM Cortex-A73 + 2x ARM Cortex-A53 big.LITTLE architecture.
This defconfig includes the Linux mainline kernel version 6.3 as well as
mainline uboot version 2023.04 with an in-tree .dts and uboot-defconfig.
It also includes the host-tool amlogic-boot-fip which is necessary for
signing the bootloader. This host tool is used in the post-image.sh script
in order to generate the signed binary.
This binary is then flashed to the final sdcard.img after it is
generated using genimage. It is done in this way because the bootloader
image needs to be flashed in 2 steps. First the first 444 bytes need to
be flashed to the beginning of the sdcard.img, then we need to skip 68 bytes
in the source and the destination and then write the remaining
bootloader image to the sdcard.img.
Ref: http://docs.khadas.com/products/sbc/vim3/development/create-bootable-tf-card
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y
add BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
add BR2_PACKAGE_HOST_DOSFSTOOLS=y for genimage vfat support
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Update the linux-imx kernel to be aligned with the NXP BSP
LF6.1.22_2.0.0 (same release used in meta-freescale [1]).
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since they are new dependencies for building mkeficapsule u-boot tool.
The uboot-imx doesn't use the default imx8mp-evk devicetree anymore due
to commit [2]:
"Change to use imx8mp-evk-revb4.dtb and imx8mp-ddr4-evk-revb4.dtb
as default kernel DTB for iMX8MP re-design EVK board. Old EVK
board is EOL, to boot old EVK, user can switch to old DTB manually."
Since the freescale_imx8mpevk_defconfig only install imx8mp-evk.dtb in
the final image, the boot stop with:
Booting from mmc ...
Failed to load 'imx8mp-evk-revb4.dtb'
WARN: Cannot load the DT
Add a u-boot defconfig fragment to revert this change [2] and use the
imx8mp-evk.dtb by default.
Runtime tested on i.MX 8M Plus EVK REV B2.
[1] e6b1b6725c
[2] a60e787a6e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Bananapi M2 Berry board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable OpenSSL to build U-boot. Reported by the daily autobuild.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083367140
Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Backport an upstream patch fixing the build with binutils >= 2.38
for riscv's for Zicsr and Zifencei.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4987456149
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching ATF to github, the BR2_TARGET_UBOOT_CUSTOM_GIT=y
symbol was not removed. Since then this defconfig fail to build
in gitlab-ci due to invalid defconfig check.
WARN: defconfig ./configs/freescale_imx6qsabresd_defconfig can't be used:
Missing: BR2_TARGET_UBOOT_CUSTOM_GIT=y
[1] dd42b159a5
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436612
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uboot needs Python libfdt to build:
pylibfdt does not seem to be available with python3
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4839060137
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump qemu_arm_ebbr_defconfig and qemu_aarch64_ebbr_defconfig in sync:
- Bump Linux to v6.4.3
- Bump U-Boot to 2023.07.02
- Bump TF-A to v2.9
While at it, tune the documentation:
- Increase the amount of memory in the example commands to help run the
largest OS distributions.
- Update the link to the IR Guide to point at the latest version.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is needed to auto-load some kernel modules needed for the HW to
work.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit cbd91e89e4
we can use the default BR2_riscv_g to select IMAFD extensions and
still be able to enable additional extensions, such as the C extension
in our cse.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All defconfigs were runtime tested in Qemu 8.0.3.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's select the RVA option as Andes 45-series CPUs support IMAFDC
extensions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the RISCV_ISA_RVC config option to match updated RISCV kconfig
instruction set options.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new binutils version break the ATF build due to new linker warnings:
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
From [1]
"Users of GNU ld (BPF) from binutils 2.39+ will observe multiple instaces
of a new warning when linking the bl*.elf in the form:
ld.bfd: warning: stm32mp1_helper.o: missing .note.GNU-stack section implies executable stack
ld.bfd: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld.bfd: warning: bl2.elf has a LOAD segment with RWX permissions
ld.bfd: warning: bl32.elf has a LOAD segment with RWX permissions
These new warnings are enbaled by default to secure elf binaries:
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
- https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=0d38576a34ec64a1b4500c9277a8e9d0f07e6774
"
Bump the ATF custom version to 2.9 for binutils 2.39+ support.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436283
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel to the latest release of 5.4 kernel series
to fix an issue with gcc 12.
arch/mips/jz4740/setup.c: In function 'plat_mem_setup':
arch/mips/jz4740/setup.c:64:25: error: comparison between two arrays [-Werror=array-compare]
64 | if (__dtb_start != __dtb_end)
| ^~
arch/mips/jz4740/setup.c:64:25: note: use '&__dtb_start[0] != &__dtb_end[0]' to compare the addresses
CC fs/debugfs/file.o
cc1: all warnings being treated as errors
Fixed in v5.4.195:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=a60def7568216684f62b117c199429c4a9a89570
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436573
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
objtool built by the kernel requires libelf
ldd output/build/linux-6.1.24/tools/objtool/objtool
linux-vdso.so.1
libelf.so.1 => output/host/lib/libelf.so.1
While updating the kernel [1] we forgot to select
BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to provide Buildroot's host-libelf.
Using host-libelf avoid linking with libelf installed on the host or
failing to build objtool if libelf is not installed.
[1] d45538f2e7
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436869https://gitlab.com/buildroot.org/buildroot/-/jobs/4889436872
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch introduces patches for the custom kernel, as it is
currently used for the Radxa Rock 5B. The patches fix two gcc
compiler warnings, which result in a build error, if the kernel
is used with gcc version 12.
Since also the code of custom board drivers for WiFi support is
affected, and no fixes are provided by the vendor, the custom WiFi
support is disabled.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the instruction sets for MPFS icicle kit to mirror the
configuration update, i.e. It is now classed as a RISC-V G core with
support for C, IMAFDC.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The generic extension set 'G' is realy a base with the minimal set of
extensions needed to be comfortable (but not required) to run a
linux-bassed system. Similarly, we consider the custom to be about the
custom set of features (not about a custom core implementing such a
set).
As such, we allow that a core with the G set can have futher extensions
without requiring it to be configured as a custom set.
We drop the intermediate symbols with the prompts, and move the prompts
to the previously hidden symbols, and add a prompt for the I set.
This alows one to clearly see what the generic set is about, without
having to delve into the help and hunt the list of selected symbol.
Note however that the G set implies Zicsr and Zifencei, but we have no
prompt for thos two, because in Buildroot, we assume that they are
mandatory and always present, like the I set (which they previously were
part of).
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
[yann.morin.1998@free.fr:
- drop the intermediate symbols
- move prompt to previously hidden symbols
- add symbol for I
- update defconfigs
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Don't specify the ARCH_FLAGS of U-Boot, so both extensions can be
appended to -march when building w/ gcc-12.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/4839059655
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The issue seems to be fixed. I checked qemu and linux git repositories
but can not find any information when this is starting to work.
System gets successfully an IP, no further testing was done.
Tested with Qemu 8.0.3 and Linux 6.1.x.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- TF-A v2.8 (including mainline patches)
- PLM xilinx_v2023.1
- PSMFW xilinx_v2023.1
- versal-firmware uses new github.com/Xilinx/soc-prebuilt-firmware repo
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The m68k Linux kernel build is broken with binutils >= 2.41 with:
arch/m68k/fpsp040/skeleton.S: Assembler messages:
arch/m68k/fpsp040/skeleton.S:502: Error: junk at end of line, first unrecognized character is `#'
arch/m68k/fpsp040/skeleton.S:508: Error: junk at end of line, first unrecognized character is `#'
This commit adds a backport from the upstream Linux kernel which fixes
this issue. Many thanks to Romain Naour for the issue investigation
and the identification of the kernel commit fixing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- improve 8ULP support (rev A1)
- add mmc user fastboot support
- add fastboot partconf support
- add nitrogen8mp smarc support
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp defconfigs to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
- ATF v2.8 (including mainline buildroot patches)
- PMUFW xilinx_v2023.1
- Updated pm_cfg_obj.c from Vitis v2023.1
- Removed kria u-boot patch which is included with xilinx-v2023.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot 2022.05 use binutils 2.37 by default, but the binutils
version was downgraded to the previous binutils version in qemu_ppc64*
defconfigs due to a bug in binutils 2.37 [1].
Later when binutils 2.36 has been removed the binutils version has
been updated to 2.38 (even though it was already the default version
selected by Buildroot at that time) [2].
Since then, several binutils release has been added and the binutils
version 2.38 has been removed recently [3].
Since the initial bug is gone with the removal of binutils 2.37,
we can safely remove the binutils version from qemu_ppc64 defconfigs.
[1] 1e2fe860f3
[2] e461c9adc8
[3] 1391c99d62
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/4798047373
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel is built without network support, so network utils are useless.
This has a positive impact on the size of busybox and xipImage, making
them smaller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiegineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 11 [1] the sparc architecture is disabled since
it produce a non working image. Buildroot now provide gcc
13.x, 12.x and 11.x and we are going to remove gcc 10
that was the last working release (thanks to a local patch).
First remove qemu_sparc_ss10_defconfig since it will no longer
be possible to build it with the internal toolchain backend.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The u-boot.stm32 image is now created by binman tool, so the
BR2_TARGET_UBOOT_BUILD_FORMAT_STM32_LEGACY configuration needs to be
disabled, but pylibfdt is now needed.
Tested on stm32mp157f_dk2.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported in commit [1] of the U-Boot project, the config.mk file has
been suppressed in order to use binman to manage FIT
generation. Therefore, the "u-boot.stm32" make target should no longer
be used with recent versions of U-Boot.
The configuration option added by this comit allows the creation of
the u-boot.stm32 image for both recent versions of U-Boot, which use
binman, and older versions.
Legacy handling would have suggested that this new option should
"default y" to preserve existing behavior, but as moving forward all
U-Boot new versions will no longer need this u-boot.stm32 target, it
probably makes sense here to not comply with this backward
compatibility rule, as an exception.
[1] 5564b4cd4d5c69 ("stm32mp: add binman support for STM32MP15x")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: David Reaver <me@davidreaver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build the am335x-bonegreen-wireless.dtb device tree.
The genimage script which is shared between beaglebone and
beaglebone_qt5 was updated to support the bonegreen-wireless.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Regression builds failed to build uboot due to missing OpenSSL
library.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes uboot build errors:
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
|
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_RISCV_ISA_CUSTOM_RVA is currently not explicitly listed as it is
selected by BR2_riscv_custom. This looks confusing. Let's enable it.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With upstream commit ae2d9506a36c ("riscv: sifive: Rename fu540 board to unleashed")
in U-Boot v2021.07 release, the defconfig for SiFive Unleashed board
has been changed to sifive_unleashed_defconfig.
Also newer U-Boot has deprecated the usage of SPL_FIT_GENERATOR
to generate u-boot.itb hence there is no 'u-boot.itb' target in
the U-Boot Makefile anymore. Instead binman is used to assemble
the u-boot.itb image.
We will need to switch to BR2_TARGET_UBOOT_FORMAT_CUSTOM for
installing u-boot.itb.
Switch over to use the latest U-Boot v2023.04 release.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the rest of RISC-V boards have been switched to use OpenSBI
1.2, let's update hifive_unleashed to use OpenSBI 1.2 too.
Resolves: https://bugs.busybox.net/show_bug.cgi?id=15658
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Select BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following
build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default kernel configuration for s390x enable a lot of
drivers by default so increase the image site to 120M.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4364600444
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ppc-mpc8544ds is the only qemu configuration that requires a kernel patch:
board/qemu/ppc-mpc8544ds/patches/linux/0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch
But this patch doesn't apply after a backport between v6.1.20 and v6.1.21
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da0beae2449376326086e9f57468fd2b64736d2a
So the patch 0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch doesn't
seem required anymore.
Welcome to Buildroot
buildroot login: root
# uname -a
Linux buildroot 6.1.28 #1 Wed May 24 09:08:27 UTC 2023 ppc GNU/Linux
# cat /proc/cpuinfo
processor : 0
cpu : e500v2
clock : 400.000000MHz
revision : 3.0 (pvr 8021 0030)
bogomips : 800.00
timebase : 400000000
platform : MPC8544 DS
model : MPC8544DS
Memory : 128 MB
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4306895282https://bugs.busybox.net/show_bug.cgi?id=15581
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Cc: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynq_zed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2023.1 which includes
the following updates:
- Linux v6.1.5
- U-Boot v2023.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kernel is built without network support. It is useless to compile the
package and then remove it from rootfs.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The versal vc1902 on the vck190 evaluation board has an ARM Cortex A72 core.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package optee-benchmark is no more maintained by OP-TEE community
hence don't enable that package in qemu_arm_vexpress_tz_defconfig.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi PC Plus requires host OpenSSL.
Build error is masked only because Linux kernel is built
before U-Boot for this specific image configuration were
wireless driver is enabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi Zero requires host OpenSSL.
Build error is masked only because Linux kernel is built
before U-Boot for this specific image configuration were
wireless driver is enabled.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Building U-Boot for OrangePi One now requires host OpenSSL. Select
BR2_TARGET_UBOOT_NEEDS_OPENSSL to fix the following build error:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4187707115
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After booting Linux the userspace is unusable since every command issued,
that is a symlink to busybox, fails because of no free ram. So let's
disable IIO in linux.config to give some more ram to userspace.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux kernel to 6.1.14 and U-Boot to 2023.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux kernel to 6.1.14, U-Boot to 2023.01, ATF to 2.8.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 6.1.14 and U-Boot to 2023.01
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's use a more modern kernel with a broader range of hardware support
for PCs.
We stick to 6.1, rather than 6.2, as the former is an LTS, whicle the
latter is not.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04 and remove the patch that has already
been upstreamed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The version of U-Boot must be explicitly set because if you keep the
default setting, the bootloader is continuously updated in buildroot with
the risk of building a non-working image.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump U-Boot to version 2023.04.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux Kernel 6.1 now being officially promoted to be a LTS, this
commit bump the kernel version of this defconfig to 6.1.14.
A Kernel config fragment "linux.fragment" is now needed as the kernel
no longer enable SBI v0.1 support and the earlycon RISC-V SBI in its
riscv arch defconfig. See [1] [2].
The Spike riscv-isa-sim was updated upstream accordingly [3].
In order to keep a smooth transition, this kernel config fragment
re-enable those options to make sure this kernel will work with
both old Spike versions (not including commit [3] like the v1.1.0
currently included in Buildroot), and newer versions. This commit
was also successfully tested with riscv-isa-sim at commit
0d1a48c0c0.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f562570b9c5d6a3e30d87aec60a9d8f22a3203c
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3938d5a2f9369d1ebd56320629fed395ce327e9c
[3] 191634d285
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.1.13 and increase the rootfs size accordingly.
- Bump the FVP in the readme to version 11.20 build 15 and update the
command line.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and rename config fragment to make it
clearer that it is not a complete config file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
