A defconfig for the friendlyarm nanopi-m4 was added in
493c3979a4, but then removed
in a24bd8936f because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
A defconfig for the rockpro64 was added in
59e1077b4e, but then removed
in 10f49213b7 because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
Current X.org X server is incompatible with this driver.
We no longer support unmaintainted versions of X.org X server.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Libbytesize is a small library providing a C "class" for working with
arbitrary big sizes in bytes.
The mdraid plugin for libblockdev depends on this package, which newer
versions of udisks require when building with the udisks daemon
enabled.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libblockdev is a C library supporting GObject introspection for
manipulation of block devices. It has a plugin-based architecture
where each technology (like LVM, Btrfs, MD RAID, Swap,...) is
implemented in a separate plugin, possibly with multiple
implementations.
gobject-introspection is not a strict dependency and may be disabled
via a configure flag.
This is the base package with everything disabled, the subsequent
patches in this series will add more options necessary to bump udisks
to the latest.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FRR is free software that implements and manages various IPv4 and IPv6
routing protocols. It runs on nearly all distributions of Linux and
BSD as well as Solaris and supports all modern CPU architectures.
FRR currently supports the following protocols:
BGP
OSPFv2
OSPFv3
RIPv1
RIPv2
RIPng
IS-IS
PIM-SM/MSDP
LDP
BFD
Babel
PBR
OpenFabric
VRRP
EIGRP (alpha)
NHRP (alpha)
Some not-needed features were disabled to minimize package
dependencies:
- POSIX capabilities
- RPKi
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[Thomas:
- select bash instead of depending on it
- switch to version 7.4, since 7.3 was not building (it's using
TRUE/FALSE, which are not standard, and this was fixed in 7.4)
- use the github macro to define FRR_SITE
- use host-python3 instead of host-python]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new runtime test is based on test_dropbear.py. The only required change
is to use "-oStrictHostKeyChecking=no" instead of "-y" to accept the new key.
Since the base test infra only provide a uClibc-ng toolchain, add a second
test using a glibc based internal toolchain.
For example, this allow to trigger the openssh 8.1p bug with glibc 2.31 [1].
[1] https://bugs.archlinux.org/task/65386
Signed-off-by: Romain Naour <romain.naour@smile.fr>
yann.morin.1998@free.fr:
- deduplicate the whole test
- don't provide any NIC, we only need and use lo
- simplify post-build script (append with cat, don't munge with sed)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add initial support for RK3288 SOM based radxa rockpi-n8
target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7"
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Maxime Ripard is no longer at Bootlin, his e-mail is bouncing:
<maxime.ripard@bootlin.com>: host spool.mail.gandi.net[217.70.178.1] said: 550
5.1.1 <maxime.ripard@bootlin.com>: Recipient address rejected: User unknown
in virtual mailbox table (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though librtlsdr was initially introduced by Jason Pruitt in
2014, and Jason is still listed in the DEVELOPERS file for this
package, in recent times it's mainly Gwenhael who has been taking of
this package. Let's reflect that in the DEVELOPERS file so that
Gwenhael gets notified when there are librtlsdr issues.
Cc: Jason Pruitt <jrspruitt@gmail.com>
Cc: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Rust upstream distributes tarballs with separate rust and cargo
binaries, but also tarballs with everything together. The latter
contains a bit more than what we need, so the download is slightly
larger than separate cargo-bin and rust-bin. But it simplifies our life
if we do the same in rust-bin as in rust (i.e. get both rust and cargo).
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As no package depends on the standalone cargo package, it can be
dropped.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adding mbpfan, a fan control daemon for MacBook laptops.
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: add hash file, drop Debian init script, drop systemd symlinks, add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds some packages I contributed to my entry.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the
Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this
configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.
http://espressobin.net
The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge. To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is a new dependency on grpc versions > 1.25.0
Tested with the following distributions:
- Debian 9
- CentOS 7
- Fedora 32
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Netopeer2 is a set of tools implementing network configuration
tools based on the NETCONF Protocol.
Netopeer2 needs libnetconf2 to have SSL/TSL and SSH support, so
we enable both openssl and libssh+server from netopeer2, so that
libnetconf2 has appropriate support. But netopeer2 does not use
either, so does not build-depend on them.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- fix dependencies and their comments
- explain openssl and libssh+server dependencies
- fix codestyle in Config,in, noticed by Adam
- fix codestyle in .mk
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
reSIProcate is a framework that aims to fully implement the SIP
protocol in first class C++. It is intended for use in other
applications, such as the repro SIP proxy.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- Fix incorrect "select"
- Simplify the build command, to allow the package Makefile to use
pkg-config, so added host-pkgconf
- Use a full destination path for the installation step
- Use the Github macro]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx6ullevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2
components. Update README file with new defconfigs and new
packages/website.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
parprouted is a daemon for transparent IP (Layer 3) proxy ARP
bridging. This is useful for creation of transparent firewalls
and bridging networks with different MAC protocols. Also,
unlike standard bridging, proxy ARP bridging allows to bridge
Ethernet networks behind wireless nodes without using WDS or
layer 2 bridging.
https://www.hazard.maks.net/parprouted
Signed-off-by: Owen Walpole <owen@walpole.dev>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399 based rockpi-4 targets (model A, B, C)
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.4.46
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399PRO SOM based rockpi-n10 target
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.7.2
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bitwise is multi base interactive calculator supporting dynamic base
conversion and bit manipulation. It's a handy tool for low level
hackers, kernel developers and device drivers developers.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the Boost ODB profile library. The Boost profile
provides support for persisting Boost smart pointers, containers, and
value types with the ODB system.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the MySQL ODB runtime library. Every application
that includes code generated for the MySQL database will need to link
to this library.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the PostgreSQL ODB runtime library.
Every application that includes code generated for the PostgreSQL
database will need to link to this library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect license, remove unneeded dependency on host-odb]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the common ODB runtime library. Every application
that includes code generated by the ODB compiler will need to link to this
library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel:
- Fix incorrect license
- Remove unneeded dependency on host-odb]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ODB is an open-source, cross-platform, and cross-database
object-relational mapping (ORM) system for C++. It allows you to
persist C++ objects to a relational database without having to deal
with tables, columns, or SQL and without manually writing any mapping
code.
ODB supports MySQL, SQLite, PostgreSQL, Oracle, and Microsoft SQL
Server relational databases as well as C++98/03 and C++11 language
standards. It also comes with optional profiles for Boost and Qt
which allow you to seamlessly use value types, containers, and smart
pointers from these libraries in your persistent C++ classes.
This package is used for auto-generating ODB specific header files
into useable code that can be linked against a seperate libodb and a
specific libodb database library. As such, it is only needed as a
host program and is not user selectable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect odb license]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Thomas: add patch fixing gcc10 build, add references to upstream
commits]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcutl is distributed in source code and includes the standard autotools
build system as well as the VC++ project files. It is a dependency for odb.
Because ODB is a host-only package, and no other package depends on libcutl,
this package will also be a host-only package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also:
- Add missing hash file.
- Add new libraries to the install target.
- Apply patch to fix build with musl (MR sent upstream in [1]).
- Since there is no maintainer for this package, I can help maintain it,
so add the package to the DEVELOPERS file.
[1] https://github.com/Azure/azure-c-shared-utility/pull/456
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libnids is a C based networking library, part of networking intrusion
detection tools. It can watch network traffic & provide informations.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- only needs libpcap as a mandatory dependency
- add patch to fix libpcap detection
- pass install_root= at installation time
- drop glibc dependency, it builds fine with uclibc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
