Add a test that runs the dtc commandline tools. To test devicetree
compilation, we use an example devicetree from the dtc project. The
example source is GPL-2.0+ licensed.
Signed-off-by: Brandon Maier <brandon.maier@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
linux-pam 1.2.0 removed the use of yywrap, so the flex dependency is not
needed now (host-flex is still needed).
Fixes: #47
Signed-off-by: Damien Thébault <damien.thebault@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Commit abce4a2b3 "linux: add BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3" [1]
introduced a Kernel dependency on host-python3.
Since the Kernel does not have any specific requirements on host
Python modules, or recent host Python version, this commit replaces
the host-python3 dependency with BR2_PYTHON3_HOST_DEPENDENCY. This
will skip the host-python3 compilation if a sufficient version (3.4 or
greater at the time of this commit) is already present on host. This
will save build time.
This optimization was suggested by Peter, in [2].
Note 1: this commit was checked to ensure that Kernel v6.10.9 arm64
defconfig (which does require a python3 interpreter to build) is
working with Python 3.4.
Note 2: BR2_PYTHON3_HOST_DEPENDENCY was introduced in commit b60729784
"support/dependencies: add a check for python3" [3].
[1] abce4a2b36
[2] https://lists.buildroot.org/pipermail/buildroot/2024-September/763967.html
[3] b60729784a
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 86bb1b236 "boot/grub2: needs host-python3" [1] introduced a
dependency on host-python3.
Since grub does not have any specific requirements on host Python
modules, or recent host Python version, this commit replaces the
host-python3 dependency with BR2_PYTHON3_HOST_DEPENDENCY. This will
skip the host-python3 compilation if a sufficient version (3.4 or
greater at the time of this commit) is already present on host. This
will save build time.
This optimization was suggested by Peter, in [2].
Note 1: this commit was checked to ensure that grub is building with
Python 3.4.
Note 2: BR2_PYTHON3_HOST_DEPENDENCY was introduced in commit b60729784
"support/dependencies: add a check for python3" [3].
[1] 86bb1b2360
[2] https://lists.buildroot.org/pipermail/buildroot/2024-September/763967.html
[3] b60729784a
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
News:
- https://www.cairographics.org/news/cairo-1.18.2/
Upstream patches have been dropped in this commit.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error happening on builds with
big endian architecture target and libflac enabled.
```
[ 75/243] Linking build/tests/test-pitchshift
/home/autobuild/autobuild/instance-16/output-1/per-package/aubio/host/bin/../lib/gcc/mips64-buildroot-linux-gnu/13.3.0/../../../../mips64-buildroot-linux-gnu/bin/ld: src/libaubio.so: undefined reference to `SWAPS'
collect2: error: ld returned 1 exit status
Waf: Leaving directory `/home/autobuild/autobuild/instance-16/output-1/build/aubio-152d6819b360c2e7b379ee3f373d444ab3df0895/build'
Build failed
```
There is a missing definition of the `SWAPS` macro in
`/src/io/sink_flac.c` file.
This patch adds an out of tree patch that copy the `SWAPS` definition from the
`/src/io/sink_wavwrite.c` file in `sink_flac.c` to fix this issue.
Fixes:
- https://autobuild.buildroot.org/results/b88/b8895a81411dc7622b0aba9f2f0eaa0aef5a1a10/
- https://autobuild.buildroot.org/results/bc7/bc733f5192b354cb960b6a4726efb597be4bb06c/
- https://autobuild.buildroot.org/results/ea5/ea52dbcc14c2bab300277053f0b9599a8e82294a/
- ...
Signed-off-by: Thomas Perale <thomas.perale@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License hash changed due to TCL license added and reformatting:
54497bd583
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch which is no longer needed/applicable.
Drop no longer required python-hkdf runtime dependency.
Add new python-cryptography runtime dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop no longer required --skip-dependency-check build option as
upper setuptools version is no longer pinned:
9d6e212b77
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 174bf40fb520893a5ef69ef02c22aa232b56bd67 introduced the usage of
`flock -w` to prevent errors during concurrent access of the environment
(IE: When a process is editing an env and another is trying to restore it.)
As such, mender-grubenv now requires util-linux and the basic binaries
set, as the busybox flock does not provide the -w argument.
Other changes:
- The boot directory is now expected to be /boot instead of /boot/grub
- License hash changed for 2023 -> 2024 year date (see commit f54ecfb)
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Update the kernel to the latest 6.6 LTS version
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
fwts RISC-V 64bit support was introduced in version 20.07.00, see [1].
This commit adds this architecture in _ARCH_SUPPORTS.
[1] https://wiki.ubuntu.com/FirmwareTestSuite/ReleaseNotes/20.07.00
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See release announce:
https://lists.ubuntu.com/archives/fwts-devel/2024-September/013906.html
This commit also update the commented hash source URL from http to
https, since it is now redirected.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit adds support for STM32F746G-DISCO board. The discovery kit is
a complete demonstration and development platform for STMicroelectronics
Arm Cortex-M7-core-based STM32F746NG.
Board support package includes the following components:
- mainline Linux kernel 5.15.165
- mainline U-Boot 2024.07
- default packages from buildroot
Link: https://www.st.com/en/evaluation-tools/32f746gdiscovery.html
Co-Developed-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With FDPIC we want a shared busybox executable even with noMMU.
Static is already handled by busybox.mk for static toolchains.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NPTL is supported on no-MMU ARM systems if FDPIC binaries are used.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the FDPIC ABI is enabled by default in the toolchain, it must be
explicitly disabled when building the kernel.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the FDPIC ABI is enabled by default in the toolchain, it must be
explicitly disabled when building U-Boot.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux on ARM supports FDPIC binaries intended for use on no-MMU
systems. This patch enables support for building a toolchain that
produces FDPIC binaries, only for ARMv7-M platforms, for which FDPIC
binaries are relevant.
The target name for a FDPIC toolchain must be
arm-<vendor>-uclinuxfdpiceabi, which doesn't follow the standard
format and requires a special case.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the introduction of ARM FDPIC support, we need to make sure that
the existing ARM FLAT external toolchains are not made
visible/available when ARM FDPIC is selected. This commit updates the
gen-bootlin-toolchains script to take this into account.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FDPIC support is being added as a new option for an existing
architecture (ARM), so we don't want to suddenly change the default.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 58dcd28dfb.
ARM supports FDPIC, so this code is needed once again.
Signed-off-by: Ben Wolsieffer <Ben.Wolsieffer@hefring.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the hackathon in Vienna, it was decided [0] to stop requiring
annotated defconfig files, and that they should all be regenerated.
This commit does just that.
This is a mechanical change, achieved by running (the defcfg script is
repriducedc at the end of the commit log):
$ for cfg in configs/*_defconfig; do
./defcfg "${cfg##*/}" || break
done
Out of our 302 defconfig files, only 247 needed regenerating, which
means that about 1 in 5 was already not providing the requested
annotations.
To be noted: three defconfig files had duplicate definitions, which this
commit resolves:
nitrogen6sx_defconfig
nitrogen7_defconfig
olimex_a33_olinuxino_defconfig
warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
====
Below is the script to reproduce the commmit. What it does is regenerate
the configuration first, then applies a patch to update kernel headers
to 3.11, and then recalls the defconfig again, and finally verifies that
the 3.11 headers are not selected (and ignores whether the latest are
selected or not): we want to catch whether defconfig that were using
3.10, currently the latest we support, would stioll get those headers
after we regeerate those.
--->8------>8------>8------>8------>8---
#!/bin/sh
cfg="${1}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
make "${cfg}"
make savedefconfig
patch -p1 <<_EOF_
diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host
index 2ae4077ffe..e669f89267 100644
--- a/package/linux-headers/Config.in.host
+++ b/package/linux-headers/Config.in.host
@@ -129,8 +129,12 @@ choice
If your kernel headers are more recent than the latest version
in the choice, then select the latest version.
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11
+ bool "6.11.x or later"
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10
- bool "6.10.x or later"
+ bool "6.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9
diff --git a/toolchain/Config.in b/toolchain/Config.in
index 6e91ab756c..c2522aca7f 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
bool
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
+
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+ bool
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
select BR2_TOOLCHAIN_HEADERS_LATEST
# This should be selected by the latest version, above, to indicate that
@@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
# stops affecting a value on the first matching default.
config BR2_TOOLCHAIN_HEADERS_AT_LEAST
string
+ default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8
_EOF_
make "${cfg}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
diff="$(
diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \
<( tail -n +5 .config.old ) \
<( tail -n +5 .config )
)"
if [ "${diff}" ]; then
printf 'Not idempotent for "%s"\n' "${cfg}" >&2
exit 1
fi
---8<------8<------8<------8<------8<---
====
To verify that no other changes are made to the defconfigs that are
risky when the defaults change, we ran the following simple script
(where buildroot-prev is a checkout just before this commit). It shows
that there are many settings removed because they are default, but none
of them run the same risk that the default is going to be changed in the
future.
for i in configs/*_defconfig; do
diff="$(diffconfig ../buildroot-next/$i $i)"
if [ -n "$diff" ]; then
echo "==> $i"
echo "$diff"
echo
fi
done
--->8------>8------>8------>8------>8---
==> configs/aarch64_efi_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/acmesystems_aria_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_aria_g25_256mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_256mb_defconfig
-BR2_arm926t y
==> configs/amarula_vyasa_rk3288_defconfig
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/armadeus_apf27_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf28_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf51_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/aspeed_ast2600evb_defconfig
-BR2_ARM_FPU_VFPV4D16 y
==> configs/asus_tinker-s_rk3288_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/at91sam9260eknf_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9g20dfc_defconfig
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800
-BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE 512
-BR2_arm926t y
==> configs/at91sam9g45m10ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9rlek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_defconfig
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_dev_defconfig
-BR2_arm926t y
==> configs/atmel_sama5d3_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3xek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/bananapi_m2_ultra_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/bananapro_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/beaglebone_qt5_defconfig
-BR2_PACKAGE_TI_SGX_KM y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/beagleboneai64_defconfig
-BR2_TARGET_TI_K3_BOOT_FIRMWARE y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y
==> configs/beelink_gs1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/canaan_kd233_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/ci20_defconfig
-BR2_KERNEL_HEADERS_AS_KERNEL y
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin"
==> configs/cubieboard2_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/freescale_imx28evk_defconfig
-BR2_arm926t y
==> configs/friendlyarm_nanopi_r2s_defconfig
-BR2_cortex_a53 y
==> configs/globalscale_espressobin_defconfig
-BR2_cortex_a53 y
==> configs/hifive_unleashed_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_GENERIC_GETTY y
==> configs/imx23evk_defconfig
-BR2_arm926t y
==> configs/imxrt1050-evk_defconfig
-BR2_LINUX_KERNEL_ZIMAGE y
==> configs/khadas_vim3_defconfig
-BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3"
==> configs/kontron_bl_imx8mm_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/kontron_pitx_imx8m_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/kontron_smarc_sal28_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/lafrite_defconfig
-BR2_cortex_a53 y
==> configs/lego_ev3_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_arm926t y
==> configs/linksprite_pcduino_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/ls1046a-frwy_defconfig
-BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046"
==> configs/mx6cubox_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/nexbox_a95x_defconfig
-BR2_cortex_a53 y
==> configs/nitrogen6sx_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen6x_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen7_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen8m_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mm_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mn_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mp_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/odroidc2_defconfig
-BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y
==> configs/olimex_a10_olinuxino_lime_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a13_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a20_olinuxino_lime2_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_lime_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_micro_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a33_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a64_olinuxino_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/olimex_imx233_olinuxino_defconfig
-BR2_arm926t y
==> configs/openblocks_a6_defconfig
-BR2_arm926t y
==> configs/orangepi_lite2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_one_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_one_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_pc_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_pc_plus_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_r1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero2w_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero3_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero_plus2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/pine64_defconfig
-BR2_cortex_a53 y
==> configs/pine64_sopine_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/qemu_aarch64_sbsa_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/qemu_aarch64_virt_defconfig
-BR2_cortex_a53 y
==> configs/qemu_arm_versatile_defconfig
-BR2_arm926t y
==> configs/qemu_arm_vexpress_defconfig
-BR2_ARM_FPU_VFPV3D16 y
==> configs/qemu_arm_vexpress_tz_defconfig
-BR2_PACKAGE_LIBOPENSSL y
==> configs/qemu_m68k_mcf5208_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_m68k_q800_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
-BR2_m68k_68040 y
==> configs/qemu_microblazebe_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_microblazeel_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_mips32r2_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r2el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc64le_powernv8_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc64le_pseries_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc_bamboo_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_g3beige_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_mpc8544ds_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_sh4_r2d_defconfig
-BR2_sh4 y
==> configs/qemu_sparc64_sun4u_defconfig
-BR2_sparc_v9 y
==> configs/qemu_sparc_ss10_defconfig
-BR2_sparc_v8 y
==> configs/qemu_x86_defconfig
-BR2_i386 y
==> configs/raspberrypi0_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi0w_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi2_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi3_64_defconfig
-BR2_cortex_a53 y
==> configs/raspberrypi3_qt5we_defconfig
-BR2_PACKAGE_KMOD y
-BR2_PACKAGE_QT5BASE_JPEG y
-BR2_PACKAGE_QT5BASE_PNG y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/raspberrypi_defconfig
-BR2_ARM_EABIHF y
==> configs/riotboard_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/rock64_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rock_pi_n8_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rockpro64_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/s6lx9_microboard_defconfig
-BR2_microblaze y
==> configs/sheevaplug_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NETWORK n
-BR2_arm926t y
==> configs/sipeed_maix_bit_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_bit_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_dock_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_dock_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_go_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_go_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maixduino_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maixduino_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/snps_archs38_hsdk_defconfig
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/solidrun_clearfog_gt_8k_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
==> configs/solidrun_macchiatobin_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_UBOOT_USE_DEFCONFIG y
==> configs/spike_riscv64_defconfig
-BR2_RISCV_64 y
==> configs/ts5500_defconfig
-BR2_i386 y
-BR2_x86_i586 y
==> configs/versal_vck190_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/versal_vpk180_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kd240_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kr260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kv260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu102_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu104_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu106_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
---8<------8<------8<------8<------8<---
Doctoring a defconfig is tedious, and it is not easy to update a
defconfig, as it requires manual copy-pasting, adding comments and so
on...
Instead, just require defconfigs to be generated with 'savedefconfig'.
Any details can/must be provided in the commit log.
Reported-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Currently, there is no default value in the choice for the custom kernel
version, and the latest version is at the top of the list.
This means tha a defconfig that uses the latest version does not get the
symbol written in it, and thus when a newer version is latter added, the
defconfig is then incorrect.
To kinda-workaround the issue, make the oldest, pre-3.0 version the
default: this is always going to be the oldest version, we're not going
to add anything older than that, so defconfigs that use that version
will not have it written but that will always yield it back. Conversely,
all other defconfigs will get the kernel version written in them, so it
will stick even when we add newer versions.
Reported-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
