Although highly recommended to be enabled, EFL's eeze can be disabled
and thus no dependency on libudev or dynamic device management.
Since 'BR2_PACKAGE_HAS_UDEV' has two ways to be satisfied (eudev or
systemd) we can't automatically select it, instead show a comment and
use 'depends on'.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
[Romain:
- Propagate the eeze dependency to enlightenment and efl Wayland
- Remove udev provider from eeze comment in efl's Config.in
- Add comments when eeze is not available]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise the one from the host may be used.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevas-generic-loaders is now provided by efl package, so remove
libevas-generic-loaders package dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elementary is now provided by efl package, so remove elementary package
dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since enlightenment 0.20 uuid.h is always included in e_pixmap.c but
libuuid is checked at configure time only when wayland support is
enabled.
Include uuid.h must guarded by HAVE_WAYLAND.
Fixes:
CC src/bin/src_bin_enlightenment-e_pixmap.o
src/bin/e_pixmap.c:16:18: fatal error: uuid.h: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"This will be the last release in the e20 series"
https://www.enlightenment.org/news/e-0.20.10-release
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit handles the reverse dependency tree of cairo in terms of
atomic dependencies. There are two main changes:
- cairo in fact no longer needs atomic operations. It can perfectly
build without any __sync built-in, as was tested using an ARC
toolchain without atomics, and a SPARC toolchain. Optionally, Cairo
can use the __atomic builtins provided by gcc >= 4.7, so support
for this is added as well. Thanks to this change, the
BR2_ARCH_HAS_ATOMICS dependency is removed from cairo and all its
reverse dependencies.
- harfbuzz does require the __sync built-in for 4 bytes integers, so
we add a dependency on BR2_TOOLCHAIN_HAS_SYNC_4 to harfbuzz and all
its reverse dependency, the main one being the pango package. Due
to this, the vast majority of gtk-related packages are moved to a
dependency on BR2_ARCH_HAS_ATOMICS (which used to be due to cairo)
to a dependency on BR2_TOOLCHAIN_HAS_SYNC_4 (due to pango ->
harfbuzz).
In detail:
- cairo
Remove BR2_ARCH_HAS_ATOMICS dependency, link against -latomic when
gcc >= 4.8 in order to use the __atomic functions.
- harfbuzz
Add dependency on BR2_TOOLCHAIN_HAS_SYNC_4
- cairomm, gst-plugins-good, gst1-plugins-good, libgdiplus,
libsvg-cairo, weston
Remove BR2_ARCH_HAS_ATOMICS dependency (since cairo no longer needs
atomics)
- enlightenment, cwiid, gst-plugins-bad, gst-plugins-base,
gst1-plugins-bad, gst1-plugins-base, gtkmm3,
libevas-generic-loaders, libfm, libgail, libgtk2, libgtk3, librsvg,
openbox, opencv, opencv3, pango, pangomm, pcmanfm, pinentry,
rrdtool, webkit, webkitgtk24, xscreensaver
Switch from a BR2_ARCH_HAS_ATOMICS dependency to a
BR2_TOOLCHAIN_HAS_SYNC_4 (they depend on pango, harfbuzz, gtk, or
some other related package)
- directfb
Remove BR2_ARCH_ATOMICS dependency of the BR2_PACKAGE_DIRECTFB_SVG
(since cairo can build without atomics), but add a
BR2_TOOLCHAIN_HAS_SYNC_4 dependency on BR2_PACKAGE_DIRECTFB itself
since it does use __sync built-ins. This replaces the !BR2_sparc
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This allow to keep backward compatibility with older
defconfig files that used BR2_PACKAGE_EFL.
Don't add Config.in.legacy entry for libefl since it's
not part of any Buildroot release.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream name is elementary so use it.
Even if this package provide libelementary.so, it also provide
elementary_codegen, elementary_run and elm_prefs_cc tools.
Add a legacy entry.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the newly added libefl package wich provide a new version
of efl libraries.
This new version needs libelementary dependency.
Update upstream url, add hash file and use xz archive.
Select png and jpeg image loader since enlightenment_start
fail at runtime if png and jpeg image loader are not
available in elf libraries.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Yann [1], move the package dependencies
before selected packages/options.
[1] http://lists.busybox.net/pipermail/buildroot/2015-October/142955.html
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the update to uClibc-ng 1.0.3, this is no longer needed,
as the problem is fixed upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uCLibc-ng needs to backport the uClibc commit
de6561f6669308e5d2297589b39a217d4c14df1c to add
PT_GETSIGINFO definition.
This commit is already merged in uClibc-snapshot used by
Buildroot's toolchains for xtensa.
For now, disable ptrace with xtensa uClibc-ng toolchains.
Thanks to Gergely Imreh for the initial investigation and
patch:
http://patchwork.ozlabs.org/patch/470073/
Fixes:
http://autobuild.buildroot.net/results/77b/77b82e5b437d0778b3f6a3813f2c0a5c39b52db9
Reported-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libeina library uses the madvise() system call, that isn't
available on non-MMU systems. Also, several other components of EFL
use fork(). Therefore, the easiest solution is to simply disallow the
EFL as a whole on non-MMU systems.
Fixes:
http://autobuild.buildroot.org/results/ad9/ad90baa5e07569308a7e2b2510b67c5b2a563b44//
Thanks to Ryan Barnett for helping in the investigation!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evas has an optional mechanism to do asynchronous preloading of
images. This mechanism is optional, and in commit
b6d92bf415 ("libevas: async image
preload support needs threads support in toolchain"), Peter made sure
to disable the asychronous preloading when no thread support was
available.
Unfortunately, it seems like disabling the asynchronous loading is
rarely used, and it in facts fails to build: a member of structure is
not present when asynchronous preloading is disabled, but the code
continues to use it.
Since the fix is not obvious, and all this mechanism seems to have
changed completely in EFL 1.8.x, and we probably don't care much about
EFL without threads, this commit adds a dependency of libevas on
thread support. Consequently, it also reverts commit
b6d92bf415 which is no longer necessary.
Of course, this commit propagates this additional dependency to the
reverse dependencies of libevas.
Fixes:
http://autobuild.buildroot.org/results/6de/6de90018a9eeb9c495d15046a8b3270eb95a5550//http://autobuild.buildroot.org/results/693/693df99db4ab357b48d427be3a72f6d64dd53065//
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a dependency of the libglib2 package on thread
support in the toolchain, since upstream libglib2 doesn't build
without thread support. The commit is rather large as it involves
propagating the dependency on thread support to all reverse
dependencies of the libglib2 package.
[Thomas: squash all patches into one, make a few minor fixes, the most
important one being to not add comments about MMU requirement when a
package doesn't work on !MMU platforms.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
The efl libraries depends on BR2_PACKAGE_EFL, so ensure enlightenment
selects it as well, otherwise kconfig complains.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
