The patch bumps the Linux kernel to version 6.10.13 and U-Boot to
version 2024.10. As for U-Boot, the new version has added EFI Capsule
support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Arm trusted firmware is already up to date.
Co-developed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Introduce the initial base-port support for the SK-AM62P reference board
made by Texas Instruments.
Signed-off-by: Bryan Brattlof <bb@ti.com>
[Arnout: extend explanation of tiboot3.bin]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The SBSA Reference Platform was updated to neoverse-n1 (armv8.2a) in
Qemu v8.1 [1].
BR2_cortex_a57:
# cat /proc/cpuinfo
processor : 0
BogoMIPS : 2000.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x1
CPU part : 0xd07
CPU revision : 0
[...]
BR2_neoverse_n1:
# cat /proc/cpuinfo
processor : 0
BogoMIPS : 2000.00
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp ssbs
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x4
CPU part : 0xd0c
CPU revision : 1
[...]
Tests test_fwts.py test_edk2.py using
BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA=y are not updated to neoverse-n1 by
this commit. Those tests were disabled in a previous commit. Those
tests will be updated and fixed in followup commits.
Note: SBSA Reference Platform was recently updated again to neoverse-n2
(armv9.0a) in Qemu v9.1 [2]. But there is no armv9.0a support yet in
Buildroot.
[1] 1877272bad
[2] b1d592e7b0
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Julien: add a small comment in commit log about tests]
Signed-off-by: Julien Olivain <ju.o@free.fr>
qemu_aarch64_sbsa_defconfig doesn't boot since the qemu version bump to
9.0 [1]. Sync the ATF version with the one (v2.11) used by Qemu tests
[2].
Since we use a released version of ATF, we switch to ATF custom version
to use the official ATF repository instead of the read-only mirror on
ARM-software's github.
This doesn't fix yet this defconfig due to a bug in edk2 as mentioned
in the qemu commit log [2].
With the edk2 version bump applied, this defconfig doesn't boot with
ATF v2.10-lts but boot successfully with ATF v2.11.
[1] 103a55028c
[2] 24a7cd6a7c
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds support for Xilinx Versal VEK280 Evaluation Kit.
VEK280 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vek280.html
The VEK280 requires a patch for the memory node in the dts file because it is
not currently correct. This patch has been applied to the linux-xlnx repo and
will be included in the 2024.2 release.
Upstream: 3c7a97d99b
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Julien: regenerated defconfig with savedefconfig for config ordering
and kept BR2_TARGET_XILINX_PREBUILT_VERSION]
Signed-off-by: Julien Olivain <ju.o@free.fr>
mender_x86_64_efi_defconfig started failing to build since 2024.08 in
our Gitlab-ci since the board/mender/x86_64/post-image-efi.sh is
calling support/scripts/genimage.sh with the host default shell.
There is no problem if the default shell is bash but our docker
image uses dash as default shell. Since support/scripts/genimage.sh
is actually a bash script it's not going to work if bashisms are used:
support/scripts/genimage.sh: 57: Syntax error: redirection unexpected
Indeed bashisms have been added recently in
support/scripts/genimage.sh by the commit introducing bmap image
support [1].
Remove "sh" before support/scripts/genimage.sh and rely on
"/usr/bin/env bash" to find the bash interpreter.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233226891
[1] 6889056f1e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
This patch adds a basic support for the Bluefied3 board from
Mellanox/NVIDIA:
- https://www.nvidia.com/en-us/networking/products/data-processing-unit/
Brief summary of the board features:
- multicore ARM
- 16 Core ARM Processor
- DDR4: 16GB/32GB
- 2x embedded CX7
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
[Julien:
- remove add-custom-hashes from the commit log
- add link for upstream kernel hashes
- check hash with pgp
- reflow the readme.txt
- regenerated defconfig with make savedefconfig]
Signed-off-by: Julien Olivain <ju.o@free.fr>
Commit [1] removed virtio-blk-device,drive=hd0 from the Qemu command
line since RISC-V virt target now define a default type for block
devices (virtio) [2].
While it's was working as expected using
qemu_riscv{32,64}_virt_defconfig, it doesn't work for nommu variant.
Without "-device virtio-blk-device,drive=hd0", the virtio block device
virtio0 is missing in dmesg:
Expected dmesg log:
virtio_blk virtio0: 1/0/0 default/read/poll queues
virtio_blk virtio0: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB)
Unlike qemu_riscv{32,64}_virt_defconfig, mmu variant doesn't use
opensbi (-bios none) and disable mmu (-cpu rv{32,64},mmu=off)
from the qemu command line...
Adding back "-device virtio-blk-device,drive=hd0" seems to help Qemu
to enable the virtio block device for nommu target.
This partially revert commit [1].
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233227503 (qemu_riscv32_nommu_virt_defconfig)
https://gitlab.com/buildroot.org/buildroot/-/jobs/8233227509 (qemu_riscv64_nommu_virt_defconfig)
[1] dba41736da
[2] 4406ba2b5e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
The patch bumps U-Boot to version 2024.10. The new version has added EFI
Capsule support, which depends on GnuTLS, thus requiring the activation of
BR2_TARGET_UBOOT_NEEDS_GNUTLS.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rootfs partition is the first partition, not the second one: the
Grub configuration file already contains root=/dev/sda1 by default,
and it should be changed to root=/dev/vda1 is Qemu emulation is used.
Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Ethernet MAC address of the Acqua board is stored in an onboard
EEPROM. Its location is described in the device tree as:
eeprom@58 { // NVMEM node
// EEPROM parameters...
eth0_addr: eth-mac-addr@9A { // NVMEM cells
reg = <0x0 0x06>;
};
};
Since Linux 6.5, defining NVMEM cells this way, as direct children of
the NVMEM node, is deprecated. It is instead recommended to wrap the
cells inside a "fixed-layout" node.
The older, deprecated syntax is still supported on Linux 6.6. Since
Linux 6.7 (commit 2cc3b37f5b6d: "nvmem: add explicit config option to
read old syntax fixed OF cells") however, it is only supported by
selected NVMEM drivers. It is not supported by the at24 driver used to
access the Acqua's onboard EEPROM.
Update the device tree to the new, recommended, syntax. This makes it
work with newer kernels, while preserving compatibility with the
currently used 6.6.30.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the 'offset' property in genimage.cfg to align the boot partition on
1 MiB boundary. It is clearer than fixing the size of the previous
u-boot partition.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.1 recently fixed the RISC-V virt target by adding the missing
default type for block devices [1].
We no longer need to specify virtio-blk-device on the qemu command line
since it's already the default.
[1] 4406ba2b5e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.1.0 removed support for NIOS2 emulation, so we can't
no longer test it when updating Qemu zo 9.1.0.
Furthermore it seems that NIOS2 architecture will be soon
deprecated in the toolchain support.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.1 recently fixed the RISC-V virt target by adding the missing
default type for block devices [1].
But the qemu command line we use for RISC-V virt is slightly incorrect:
-drive file=rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0
With Qemu 9.1, this command line now rejected since it conflict with
the new default bus:
qemu-system-riscv64: -drive file=rootfs.ext2,format=raw,id=hd0: Drive 'hd0' is already in use because it has been automatically connected to another device (did you need 'if=none' in the drive options?)
Since we are currently still using Qemu 9.0, apply the suggested change by
adding 'if=none'.
Note: '-drive file=rootfs.ext2,format=raw,id=hd0' can be removed
in a followup patch after the qemu version bump 9.1 is merged.
[1] 4406ba2b5e
[Romain: rework the commit log]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a section to document how to update bootloader on AE350 platforms
with SPI_burn tool.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Do not disable SPL RAM support so the u-boot.itb programmed on
flash memory can be used.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Up until now cpu clock gets initialized at 384 MHz, which is
the highest supported cpu clock.
Recent A20 batches show an increased percentage of modules
reacting very sensitive to operating conditions outside the
specifications.
The cpu dies very shortly after PLLs, core frequency or cpu
voltage are missconfigured. E.g.:
- uboot SPL selects 384 MHz as cpu clock which requires a cpu
voltage of at least 1.1 V.
- Linux CPU Frequency scaling with most sun7i dts will reduce
cpu voltage down to 1.0 V.
- When intiating a reboot or reset from linux the cpu voltage
may keep the 1.0 V configuration and the cpu dies during SPL
initialization.
Therefore reduce cpu clock at uboot SPL initialization down
to 144 MHz from 384 MHz.
Use patch until KConfig option in uboot becomes available.
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update this package to the same NXP software release as the ls1046a
board.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update this package to the same NXP software release as the ls1046a
board. The only upstream change was to rename the license file.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Linux, U-Boot, and TF-A to the latest versions used by NXP's
Yocto project.
Drop the patches from board/freescale/common as the TF-A patches are
upstream.
Switch the Linux defconfig to the default ARM64 defconfig, as is done by
the NXP Yocto build.
The updated Linux kernel increases the rootfs size to 122MB so we bump
the rootfs size slightly to match.
See: https://github.com/nxp-qoriq/yocto-sdk/tree/scarthgap
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update Linux, U-Boot, and TF-A to the latest versions used by NXP's
Yocto project.
Drop the patches from board/freescale/common as the TF-A patches are
upstream.
The updated Linux kernel increases the rootfs size to 122MB so we bump
the rootfs size slightly to match.
Yocto project: https://github.com/nxp-qoriq/yocto-sdk/tree/scarthgap
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7803199902
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 6.1.112. The size of xipImage
has increased by only 54 bytes (1669958 bytes compared to 1669904 in
version 6.1.98).
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps U-Boot to version 2024.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.167.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.167 and U-Boot to
version 2024.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.167 and U-Boot to
version 2024.10.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to 6.10.12 and add the dependency on host-python3.
- Bump U-Boot to 2024.07.
- Bump TF-A to v2.11. Remove the stdout patch, which is present
upstream. Remove our hash file now that the arm-trusted-firmware
package centralises those.
- Bump FVP to 11.27.19 in the documentation.
- Convert to `make savedefconfig' format.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having the uboot environment defined on the SD card allows the user to
use the uboot setenv and saveenv commands to make persistent changes
(e.g. to change the boot order, or to set a server IP for PXE boot).
Set the uboot-env partition type GUID to "U-Boot environment", see:
https://github.com/u-boot/u-boot/blob/v2024.10/doc/README.gpt#L288https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
and enable CONFIG_PARTITION_TYPE_GUID such that uboot will automatically
find the SD card partition to store/load the uboot environment to.
We need to mark the root partition as bootable, otherwise uboot will no
longer be able to boot the partition by default. (Most likely because
the root partition is now no longer the first partition on the device.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to the latest release tag: linux4microchip+fpga-2024.09.1.
This includes the latest features and bug fixes. The main highlights
include a kernel version bump from v6.6.35 to v6.6.51 and a fix for the
Microchip mpfs-auto-update driver.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to latest release tag: linux4microchip+fpga-2024.09. This
includes the latest features and bug fixes.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.10.14 and add the dependency on host python3.
- Bump U-Boot to v2024.10 and add the dependency on GnuTLS and
util-linux (for uuid).
- Bump TF-A to v2.11.
- Turn on hashes verification and add hashes for the Linux kernel and
U-Boot.
- Fix shellcheck warnings in the post-build script.
- Remove the related exceptions in .checkpackageignore.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer uboot versions contain commit ebb0ad4eef0a ("arch: arm:
mach-rockchip: Kconfig: Enable BOOTSTD_FULL for RK3399 and RK3588"),
which enables BOOTSTD_FULL for RK3588, making it easier to figure
out issues with the bootflow, if any.
Also add the GnuTLS dependency which is needed for uboot 2024.10.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A bunch of new hardware has been enabled for rock5b in linux 6.11,
most notably USB3 host controller support, GPU support, cpufreq
support, and PCIe endpoint mode support.
Add the dependency on host python3 that is new since linux 6.10.
Also add the missing dependency on openssl (which has been needed for
a long time, since we are using arm64 defconfig, but only shows up as
an error if the host system doesn't have extract-cert installed.)
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While at it:
- Turn on hashes verification and add a hash for the Linux kernel.
- Linux kernel needs host-python3; add it.
- Convert to `make savedefconfig' format.
- Fix shellcheck warnings in our post-image script and update
.checkpackageignore.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Julien Olivain <ju.o@free.fr>
Reviewed-by: Julien Olivain <ju.o@free.fr>
[Julien: rebased the patch to resolve conflicts with commit
edc0a6b1a "configs: regenerate all defconfigs"]
Signed-off-by: Julien Olivain <ju.o@free.fr>
The patch, following the suggestion expressed in the review [1] for the
stm32f746-disco board support, moves the Linux kernel and the related
device tree to the ext4 rootfs partition. By doing so, the vfat partition,
improperly called u-boot, no longer makes sense and can therefore be
removed. From now on, U-Boot will load the kernel and the device tree
from the ext4 rootfs partition.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20240822183742.3550055-3-dario.binacchi@amarulasolutions.com/
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch, following the suggestion expressed in the review [1] for the
stm32f746-disco board support, moves the Linux kernel and the related
device tree to the ext4 rootfs partition. By doing so, the vfat partition,
improperly called u-boot, no longer makes sense and can therefore be
removed. From now on, U-Boot will load the kernel and the device tree
from the ext4 rootfs partition.
While we're at it, also fix shellcheck warnings in the post-build script.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20240822183742.3550055-3-dario.binacchi@amarulasolutions.com/
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The commit adds support for STM32F746G-DISCO board. The discovery kit is
a complete demonstration and development platform for STMicroelectronics
Arm Cortex-M7-core-based STM32F746NG.
Board support package includes the following components:
- mainline Linux kernel 5.15.165
- mainline U-Boot 2024.07
- default packages from buildroot
Link: https://www.st.com/en/evaluation-tools/32f746gdiscovery.html
Co-Developed-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The initialization script provided by the tinyinit package is the same
as the one contained in board/canaan/k210-soc/rootfs_overlay/sbin/init
except for the Linux logo, which has been removed. The patch reworks
the configurations that use this overlay directory by replacing the
initialization process contained within it with the one provided by
the tinyinit package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds the offset argument for rootfs partiton so that it's
aligned to a 1MiB boundary, instead of using the size of the previous
u-boot partition to achieve this.
Genimage will make sure no partitions overlap. So we don't need a size
argument to limit the size of the u-boot image.
Signed-off-by: Dong Wang <wangdong115@foxmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update U-Boot to fix the following error when building with
python-setuptools >= 69, that is, since 6b62384e3d
("package/python-setuptools: bump to version 69.0.3"):
packaging.version.InvalidVersion: Invalid version: 'u-boot-2019.01'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:27: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:434: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:434: scripts/dtc] Error 2
make[2]: *** [Makefile:508: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:289: output/build/uboot-2019.01/.stamp_built] Error 2
make: *** [Makefile:83: _all] Error 2
Use SPL and U-Boot FIT image combined into u-boot-sunxi-with-spl.bin.
Do not use the optional System Control Processor (SCP) firmware pointing
the SCP env variable to /dev/null.
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This board has an optional eMMC module.
Use PARTLABEL to specify the rootfs, as this works regardless of the mmc
device probe order.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Partition table hybrid means GPT + MBR.
There is no need to keep the MBR when using GPT, so migrate to GPT only.
This change also requires us to migrate from partition-type to
partition-type-uuid, otherwise genimage won't generate an image.
Note that GPT itself always writes a "protective MBR" at LBA 0.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
