This is the default terminal sway uses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add comment only for first-order deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The traditional dmenu is only running under X; dmenu-wayland is an
implementation that runs only on (some) wayland compositors; Sway
uses it by default as its menu bar.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- _SYNC_4 is an arch dependency, so comment should be hidden
- add a few missing comments for first-level dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream changed the package name and its github repo:
44df6e08cc
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This runtime test verifies the existence of the tftpy module when
selected.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Substitute spaces with tab on 2 entries for consistency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am no longer work at Synopsys, so remove this email address.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Zynq ZC702 starter kit.
ZC702 features can be found here:
https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Used with the latest version of python-constantly. It is only needed as a
host package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package is currently used in Fedora39 to provide python bindings
for kmod, and it is Python 3.12.0 compatible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: LGPL in in COPYING.LESSER]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test case runs firewalld using both system and sysvinit.
run `firewalld-cmd --state` and ensure the output is "running" with a return
code of 0.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream suggests to use it as a static library only, so follow that
principle.
Signed-off-by: Alessandro Partesotti <a.partesotti@gmail.com>
[Arnout:
- keep DEVELOPERS alphabetical;
- use oatpp for the prompt;
- add threads to the toolchain dependencies comment;
- move comment after the main prompt;
- rewrap the help text;
- empty line before upstream URL;
- hash comment Locally calulated instead of pointing to upstream
tarball URL;
- change hash to sha256;
- add hash for license file;
- reorder variables in .mk file;
- use _CONF_OPTS instead of invalid _CMAKE_OPTS.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This package defines a simple abstract interface for playing event sounds.
It is mainly used by desktop applications such as GDM and GNOME Session.
http://0pointer.de/lennart/projects/libcanberra/
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This update is required to install the latest version of the GNOME desktop.
Currently, only gvfs depends on this package, and we have confirmed that
gvfs can be built.
Signed-off-by: Takumi Takahashi <takumiiinn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
eza is a modern, maintained replacement for ls, built on exa.
https://github.com/eza-community/eza.git
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
procs is a modern replacement for ps written in Rust
https://github.com/dalance/procs.git
Signed-off-by: Saeed Kazemi <kazemi.ms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This should have been part of commit
9a51a07a91 ("configs/sipeed_licheepi_nano:
new board")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tftpy is described as a pure Python implementation of the Trivial FTP
protocol. Add support for this package.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EditorConfig [0] is an editor-agnostic configuration file, to set
preferences on how to edit text: tabs vs. spaces, tab width, indentation
size, line endings...
A large number of editors support EditorConfig, either natively [1] or
with the help of plugins [2].
Add a basic .editorconfig that provides defaults for most of the files
used by Buildroot. More can be added in the future if we can find more
matching patterns.
The values are chosen a bit arbitrarily, unless we already have a
(un)written rule about it. Notably, indentation defaults to using 4
spaces, and only a set of files for which we require TABs (Makefile,
essentially) or have already settled for TABs (Kconfig files, init
scripts...) are configured so. The traditional width of TABs is 8 char,
and we pair TAB indentation with TAB size.
Trailing spaces are usually useless, except in asciidoc source where
they can be used to force a new line without a new paragraph.
One of the limitations of .editorconfig, though, is that it matches on
filenames (e.g. *.py), not on the content (e.g. no use of mimetype, or
libmagic, or such). Still, this is enough to cover a lot of files in
Buildroot.
[0] https://editorconfig.org/
[1] https://editorconfig.org/#pre-installed
[2] https://editorconfig.org/#download
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Checkpoint/Restore In Userspace (CRIU), is a software tool for the
Linux operating system to make it possible to freeze a running
application and checkpoint it to persistent storage as a collection of files.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[yann.morin.1998@free.fr:
- BR2_ARM_CPU_ARMV8M does not exist
- BR2_BR2_powerpc64le misspelled
- move all arch dependencies to BR2_PACKAGE_CRIU_ARCH_SUPPORTS
- comment hidden with arch dependencies
- select host-python3, don't depend on it
- extend legal-info: LPLG-2.1 for lib/, MIT for images/
- PREFIX is also used at compile time for PLUGINDIR
- copy .proto file, rather than symlinking
- wrap long lines
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
zenoh-pico is the Eclipse zenoh implementation that targets constrained
devices and offers a native C API. It is fully compatible with its main
Rust Zenoh implementation, providing a lightweight implementation of
most functionalities.
https://github.com/eclipse-zenoh/zenoh-pico
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CuteKeyboard is a Qt virtual keyboard plugin for embedded applications
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Acked-by: Andrea Ricchi <andrea.ricchi@amarulasolutions.com>
[Arnout:
- add DEVELOPERS entry;
- fixed the title in the .mk file;
- use select instead of depends on;
- with the above, add depends on QT5 and QT5_JSCORE.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
These headers are required to build the pacakge spirv-tools which is
requried by mesa3d for building rusticl:
https://docs.mesa3d.org/rusticl.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-rust-bindgen will be required to build several different rust-based
packages, including a Linux kernel with rust modules and mesa3d's
rusticl which is the rust-based implementation of OpenCL.
The Cargo.toml file at the project root is a "virtual manifest". Since
we only want to install rust-bindgen, we can specify RUST_BINDGEN_SUBDIR
= bindgen-cli to use the Cargo.toml from this directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NVIDIA driver persistence daemon.
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
[Arnout:
- disable on BR2_STATIC_LIBS;
- only depend on tirpc if toolchain doesn't have RPC;
- use unstripped binary - the strip support in the makefile is utterly
broken (and we anyway strip in target-finalize);
- define NVIDIA_PERSISTENCED_USERS directly rather than with another
variable;
- install all the systemd stuff in
NVIDIA_PERSISTENCED_INSTALL_INIT_SYSTEMD.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
libnvme provides type definitions for NVMe specification and utilities
for nvme devices handling in Linux. libnvme is needed by udisks from
version 2.10.0+
https://github.com/linux-nvme/libnvme
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This tool is needed by some SoCs to sign the bootloader.
See the list of supported SoCs:
https://github.com/LibreELEC/amlogic-boot-fip
The variable BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE is used to specify
for which device this package needs to be used.
This tool uses pre-compiled binaries in order to sign the bootloader.
These binaries are provided under a proprietary license that prohibits
any redistribution of the resulting images.
A similar tool was tried to be added in the past:
http://patchwork.ozlabs.org/project/buildroot/patch/1533545408-11248-2-git-send-email-narmstrong@baylibre.com/
This time however a license file is present which can be used by
make legal-info. Additionally, acs_tool.pyc was replaced by acs_tool.py
and is therefore not compiled anymore.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add AMLOGIC_BOOT_FIP_REDISTRIBUTE = NO
add qstrip for BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE
remove build-fip-all.sh copy, not needed
factorize file copy in HOST_AMLOGIC_BOOT_FIP_INSTALL_CMDS
update commit log with the github url where we can find the list of supported SoCs.
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Mako provide some external plugins that requires additionnal and
optional runtime dependencies, make sure we test these situations.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new runtime test allows to make sure that the python-mako package
minimally works at runtime.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides firmware needed for the LS1046A-FRWY Ethernet.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot
Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 32cec3be97 (docs/manual: rename *.txt as *.adoc) renamed the manual
files but forgot to update the reference in the DEVELOPERS file, causing
check-package to warn:
WARNING: 'docs/manual/adding-packages-meson.txt' doesn't match any file, line 851
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Bananapi M2 Berry board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a simple test that builds and runs the futter-gallery application and
checks if the service is active.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: fix flake8 warnings]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Flutter Gallery is a resource to help developers evaluate and use Flutter.
It is a collection of Material Design & Cupertino widgets, behaviors, and
vignettes implemented with Flutter.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-pi is one of many flutter-embedders. However, flutter-pi is unique
because it doesn't require X or Wayland to run. So long as there is support for
KMS and DRI flutter-pi should run on any platform that flutter-engine supports.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: drop unused BR2_PACKAGE_FLUTTER_PI_TEST_PLUGIN]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There are many issues with this package:
- The release tarballs from https://github.com/flutter/engine are in no state
to compile. They are only for the use of gclient to download a source
directory structure suitable to build the Flutter engine! If you download,
extract and attempt to run `./tools/gn --no-goma --no-prebuilt-dart-sdk`, you
receive the error message:
`No such file or directory: 'flutter/flutter/third_party/gn/gn.'
But wait! Wasn't the gn binary just called? No, that's a wrapper in the
Flutter source tree that formats arguments to call the real gn binary.
The real gn is not provided in the tarball but is downloaded via gclient
(among many other supporting repositories.)
Even worse, the flutter buildsystem depends on the .git dirs being present.
(https://github.com/meta-flutter/meta-flutter/issues/271) This dependency
means it is not possible to create a reproducible tarball from the downloaded
sources, which is why there is no .hash file provided.
I have asked the flutter project to release full tarballs suitable for
compiling here: https://github.com/flutter/flutter/issues/130734
- Flutter engine includes a patched copy of clang that must be used to compile.
Using a Buildroot-build clang results in linking warning and errors.
As such, we depend on LLVM_ARCH_SUPPORTS but use the included clang for
building. On the plus side, this saves time having to compile clang.
- flutter-engine relies on the "PUB_CACHE", that is provided by flutter-sdk,
so we need a build dependency, even if no tool from host-flutter-sdk-bin
is used to build flutter-engine
Tested with:
- Debian 11 and 12
- Ubuntu 18.04, 20.04, and 22.04
- Fedora 38
- Per-package directories
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- search gclient.py from PATH
- indent shell script with 4 spaces
- reorganise schell script with prepare/cleanup
- tweak comment about weirdness of flutter buildsystem
- use suitable-extactor and TAR_OPTIONS
- use FLUTTER_SDK_BIN_PUB_CACHE
- add dependency to host-futter-sdk-bin (Adam)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
flutter-sdk-bin is a collection of host tools and plugins used to compile
flutter applications.
- As this is a collection of pre-compiled tools, append -bin to the end of the
package name.
- We must set the HOME directory variable to the sdk directory or else the
flutter dart binaries place .dart, .dart-sdk, and .flutter in ~/.
- set --clear-features, --no-analytics and --disable-telemetry first to disable
google tracking as soon as possible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- set FLUTTER_SDK_BIN_PUB_CACHE for other packages to make use of it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Chromium and Chromium OS use a package of scripts called
depot_tools to manage checkouts and code reviews. This package
also includes the gclient utility.
gclient is a Python script to manage a workspace of modular dependencies that
are each checked out independently from different subversion or git
repositories. Features include:
- Dependencies can be specified on a per-OS basis.
- Dependencies can be specified relative to their parent dependency.
- Variables can be used to abstract concepts.
- Hooks can be specified to be run after a checkout.
- .gclient and DEPS are Python scripts. You can hack in easily or add
additional configuration data.
.gclient file: It's the primary file. It is, in fact, a Python script. It
specifies the following variables:
- solutions: an array of dictionaries specifying the projects that will be
fetched.
- hooks: additional hooks to be run when this meta checkout is synced.
- target_os: an optional array of (target) operating systems to fetch
OS-specific dependencies for.
- cache_dir: Primarily for bots, multiple working sets use a single git
cache.
gclient is necessary for checking out the flutter-engine source code, as the
release tarballs provided on the flutter-engine github are in no state to
compile. Google expects the use of gclient to download a source directory
structure suitable to build the Flutter engine.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Needed for wayland support in mesa3d-demos.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Reviewed-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use $(VULKAN_HEADERS_VERSION) for VULKAN_TOOLS_VERSION as the vulkan packages
need to all be the same version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use $(VULKAN_HEADERS_VERSION) for VULKAN_LOADER_VERSION as the vulkan packages
need to all be the same version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Load sample script support/testing/tests/package/sample_nu.nu onto the
target and verify proper execution by nushell
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Nushell is a shell - written in Rust - that makes use of the nushell
language to interact with the operating system
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for PineCube with:
- U-Boot 2022.04
- Linux 5.15.61
PineCube is a low-powered, open source IP camera
with the following specs:
- Allwinner S3 Cortex-A7
- 128 MiB DDR3
- 16 MiB SPI flash
- 5 MPx OV5640 camera
- MicroSD slot
- 10/100M Ethernet with passive PoE
- 802.11 b/g/n WiFi
- Bluetooth 4.1
- USB 2.0
- 26 pins GPIO header
- Microphone
- IR LEDs for night vision
Board homepage: https://www.pine64.org/cube/
Board wiki: https://wiki.pine64.org/wiki/PineCube
Signed-off-by: Jan Havran <havran.jan@email.cz>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM62 board by introducing the
am62x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM62
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for TI's SK-AM64 board by introducing the
ti_am64x_sk_defconfig file and related support files.
More information about the board can be found at:
https://www.ti.com/tool/SK-AM64
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the image generator that builds the initial boot binary,
tiboot3.bin, for the R5 core on TI's K3 family of devices.
This requires the R5 SPL output from the ti-k3-r5-loader package as
well as some boot firmware from ti-k3-boot-firmware.
Signed-off-by: Xuanhao Shi <x-shi@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Bryan Brattlof <bb@ti.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enclosure LED Utilities
ledmon and ledctl are userspace tools designed to control storage
enclosure LEDs. The user must have root privileges to use these tools.
These tools use the SGPIO and SES-2 protocols to monitor and control LEDs.
They been verified to work with Intel(R) storage controllers (i.e. the
Intel(R) AHCI controller) and have not been tested with storage controllers of
other vendors (especially SAS/SCSI controllers).
For backplane enclosures attached to ISCI controllers, support is limited to
Intel(R) Intelligent Backplanes.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This runtime test was suggested in discussion [1]. It should detect
potential runtime failures such as the one fixed in commit eb74998125
"package/nftables: fix the build of the pyhon bindings".
We need a special kernel, because not all nftables-related options are
enabled in the pre-built one.
[1] https://lists.buildroot.org/pipermail/buildroot/2023-August/672864.html
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit
b86adfb89a ("configs/roc_rk3399_pc: new
defconfig") introduced a new defconfig with the relevant entries in
the DEVELOPERS file, but one of these entries points to a non-existing
directory. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Firewalld provides a dynamically managed firewall with
support for network or firewall zones to define the trust level of network
connections or interfaces.
Items of note:
- Setting PYTHON="/usr/bin/env python$(PYTHON3_VERSION_MAJOR)" prevents
Firewalld from setting the shebang in the installed python files to the
full path to the python interpreter used when building.
- The bundled provided SYSV init file has several bashisms and requires
/etc/init.d/functions which buildroot doesn't provide. So instead, a more
simple init.d file is provided in the package directory, which does not
require bash.
- Firewalld >= 1.0.0 requires a linux kernel version of 5.3 or later.
Because Buildroot does not have a mechanism to detect what version a user
is compiling if the kernel is external, there is no way to prevent a user
with an external kernel older than 5.3 to select this package.
- To run, Firewalld requires enabling almost every single nftables option in
the kernel menuconfig. Indeed for a regular user, this task is quite a
time-consuming operation, and missing even one required nftables option
results in firewalld failing to start.
Through a mix of trial and error and talking to the upstream developers,
the package selects the minimum amount of kernel options required for
runtime. Understandably the list is daunting. However, these options
have passed run-time tests with kernel 5.3 (the minimum kernel version
required) and kernel 6.2.10 (the latest kernel version as of this commit
log.)
As such, it is safe to say these options will work for anybody wanting to
use firewalld with a supported kernel version of 5.3 or higher.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Thomas:
- select python3 instead of depending on it
- fixup Config.in comment
- rely on NLS support by autotools-package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a followup of the discussion at:
https://lists.buildroot.org/pipermail/buildroot/2023-July/671639.html
It provides an example of a runtime tests using standard Linux graphic
components (Kernel, DRM, Mesa3D, weston).
Signed-off-by: Julien Olivain <ju.o@free.fr>
[yann.morin.1998@free.fr:
- use an overlay rather than create config file at runtime
- sleep in python not in target
- increase delay to capture DRI CRCs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add useful tool for bridging RAUC with the Hawkbit API.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for OrangePI PC2 board.
It was supported before in Buildroot, however due to problems in
building TF-A, it was removed in commit
eeede611f8. This commit re-adds it, in a
state that properly builds.
Signed-off-by: Javad Rahimi <javad321javad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add defconfig for imxrt1050-evk is a development board from NXP.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the
first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz
up to the latter with i.MXRT1170 with cortex-M7@1Ghz and
cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb
ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only
simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing
that these chips are comparable to the STM32F7xxs which have Buildroot
ported to them it seems reasonable to add support for them.
https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed for mpv since version 0.35.0:
3d459832a8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: improved thanks to feedback from a similar patch submitted by
Bernd Kuhls.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Newer versions of Google's Material Design icon package are structured
differently, making a version bump no so trivial. While work can be done
to support this, considering this package is using v2.2.3 and the most
recent version is v4.0, it is most likely that this package is not being
used. Environments which desire Material icons/fonts/etc. will most
likely achieve better results be managing their own custom package to
have an explicit selection/filter of design styles (e.g. standard,
Android, etc.), variants (basic, outlined, rounds, etc.), display
resolutions and scale selection desired.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the icicle kit, the main development board for
Microchip's PolarFire SoC.
The configuration file is microchip_mpfs_icicle_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC or an SD card.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the individual application
harts (U54s).
The image generator script sets the partitions of the image.
The kernel fragment file sets additional configurations for the icicle
kit in buildroot that are not in the default configuration.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the icicle kit and boots the FIT image.
The readme.txt file documents how to build and boot the icicle kit with
this configuration.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit duplicates the asus_tinker_rk3288_defconfig changing:
- BR2_LINUX_KERNEL_INTREE_DTS_NAME to rk3288-tinker-s
- BR2_TARGET_UBOOT_BOARD_DEFCONFIG to tinker-s-rk3288
- extlinux.conf devicetree to /boot/rk3288-tinker-s.dtb
- root device format to <major>:<minor> in order to prevent the kernel to mount rootfs
from the wrong device
- Add Flávio Tapajós for configs/asus_tinker-s_rk3288_defconfig and for
configs/asus_tinker-s_rk3288_defconfig and for board/asus/tinker-s
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add ARC700 image configuration for nSIM instruction set simulator.
This is a nice starting point for ARC700 in nSIM.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libsoup3 has a new API [1], packages using libsoup may not compile
with libsoup3 or may crash at runtime in unexpected ways, so we add a
new package. It can be installed side by site with libsoup, without
any conflict.
[1] https://libsoup.org/libsoup-3.0/ch02.html
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mhz is a tool to mathematically calculate the real running CPU frequency
and as such has proved as invaluable tool for developing CPUFreq and
similar features in the kernel.
Its source finally got a license recently so it can be packaged.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds esp-hosted package that allows to build the Linux
Kernel Driver for Espressif Esp32-* SoCs, that once programmed with
the corresponding firmware behave like a normal Wi-Fi module. Both
SDIO and SPI busses are supported and selectable.
Cc: Jesse Taube <jesse.taube@benettiengineering.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provides the `swaybg` utility, which is commonly used with `sway` to
manage background images/color configuration for the compositor.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add swugenerator as host utility to generate images for swupdate with
all the possible options available like encryption, passkey etc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-libconf is a pure-Python reader/writer for configuration files in
libconfig format, which is often used in C/C++ projects.
https://github.com/ChrisAichinger/python-libconf
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library provides an API suitable for the decode of
ARM(r) CoreSight(tm) trace streams.
OpenCSD is for example an optional dependency in the Linux
"perf" tool, starting from kernel version 5.1.
https://github.com/Linaro/OpenCSD
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A pure python library for creating multi-track MIDI files.
https://github.com/MarkCWirt/MIDIUtil
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Optional dependency of the upcoming libheif package.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Conmon is an OCI container runtime monitor.
https://github.com/containers/conmon
Dependency of podman.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a package for the Rockchip ATF binary blobs. These
binaries are needed to build U-Boot for some Rockchip SoCs (e.g.,
RK3588).
As there as so many binary blobs, for each suported SoCs, it is not
practical to introduce a choice, so one must manually define which
blobs (for bl31, tpl and optee) to use from the repository, that
match their actual board.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- simplify copying blobs
- slightly tweak help texts
- add hash for license file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Go 1.20 requires a minimum version of go 1.17.13 to bootstrap.
https://go.dev/doc/go1.20#bootstrap
As Go 1.4 was the previous version that could be compiled with C, there is now
no way to bootstrap go with a C compiler, unless we use a two-stage bootstrap:
- build host-go-bootstrap-1.4-20170531
- build host-go-bootstrap-1.19.10 with host-go-bootstrap-1.4-20170531
- build host-go-1.20 with host-go-bootstrap-1.19.9
This is implemented in this commit first, before upgrading host-go to 1.20.
Note: the .patch files from package/go version 1.19.x are not necessary for
package/go-bootstrap-stage2 and have not been included there.
Previous discussion of possible alternatives:
https://lore.kernel.org/all/CA+h8R2rtcynkCBsz=_9yANOEguyPCOcQDj8_ns+cv8RS8+8t9A@mail.gmail.com/https://lore.kernel.org/all/20220525234312.643dfc03@windsurf/T/
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move libclc to a new llvm-project subfolder
and specify site for the project. Since the version of libclc is more
recent than the version specified in LLVM_PROJECT_VERSION, don't change
it for now until a later update.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move clang to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move lld to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make updating easier, move llvm into the llvm-project folder
and use the defined information.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make updating easier in the future, group all llvm projects in
one subfolder and define some variables for all of them.
Introduce LLVM_PROJECT_VERSION_MAJOR to be used by the clang package
in a followup change.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is broken:
"It seems that you are using `distutils.command.build` to add
new subcommands. Using `distutils` directly is considered deprecated,
please use `setuptools.command.build`.
By 2023-Dec-13, you need to update your project and remove deprecated
calls or your builds will no longer be supported."
The last commit for this package occured on May, 30th, 2016.
The last issue was opened Jan, 31st, 2017 and was unanswered.
Fixes:
http://autobuild.buildroot.net/results/b57/b571d7838950e0b5ca67106cbcd9ba61b4f04a48/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Redis client written in C++
This is a C++ client library for Redis. It's based on hiredis, and is
compatible with C++ 17, C++ 14, and C++ 11.
https://github.com/sewenew/redis-plus-plus
Signed-off-by: Prabhu Sannachi <prabhu.sannachi@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package adds the rtl88822cs WiFi driver.
repo: https://github.com/jethome-ru/rtl88x2cs.git
branch: tune_for_jethub
Driver is known to support Realtek RTL8822CS SDIO WiFi/BT chip.
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a helper class providing a template for testing data
compressor and decompressor programs such as gzip, bzip2, xz...
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removal requested via email:
could you somehow please remove me as maintainer from this package.
I am since many years not using builtroot anymore and have no longer
systems with which I could do patch requests.
I am going into retirement.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Needed for upcoming Kodi version 21.0-Omega.
Depends on the previous patch to fix build error on Coldfire.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove packages which are no longer runtime-tested here.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added in 2015 to be used by Kodi ADSP addons these efforts have stopped:
https://forum.kodi.tv/showthread.php?tid=252871&pid=3053658#pid3053658
so this package is no longer needed.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
E-mails are bouncing:
<jose.pekkarinen@unikie.com>: host ASPMX.L.GOOGLE.com[74.125.133.26] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
optee-benchmark package was removed in commit cf39b596e7
("package/optee-benchmark: remove deprecated package") but forgot to
remove the associated DEVELOPERS file entry.
Using the get-developers script on any file generates a warning,
for example:
utils/get-developers DEVELOPERS
WARNING: 'package/optee-benchmark/' doesn't match any file, line 865
git send-email --to buildroot@buildroot.org
This commit fixes the issue by removing the entry.
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package has been orphan since commit ee58353 (2018-12-22).
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch updates my email address in the DEVELOPERS file.
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is no longer used as python-pypa-build now uses
python-pyproject-hooks instead. In fact, pyproject-hooks is simply the
new name of pep517 [1].
[1] https://github.com/pypa/pyproject-hooks/issues/136
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Although this is a "boot loader", it really is a tool that should be
part of an image that acts as the bootloader. Thus, it is not in the
bootloader menu.
A UI is required and can be provided by ncurses, X11 or fbdev. Only
ncurses is supported for now. The other two use libtwin which isn't part
of Buildroot for now.
Adapted from https://github.com/glevand/petitboot--buildroot
Updated to work with m68k architecture rather than just PlayStation3
(focused on qemu-system-m68k virt machine)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
[Arnout:
- Add missing arch and toolchain dependencies.
- Remove nonexistent BR2_PACKAGE_NCURSES_TARGET_* selects.
- Swap kexec/kexec-lite priority.
- Add hash for license file.
- Use version without v for VERSION.
- Remove unnecessary --localstatedir=/var.
- Add --disable-busybox.
- Remove --enable-debug.
- Remove --with-ncursesw and explicit libraries.
- Add explicit arguments for all configure options.
- Always select busybox tftp.
- Add optional dependency on dtc.
- Move dtc-specific options under a single condition.
- Minor cleanups (whitespace, comments, ...).
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
There's a runtime dependency on tomli, but only for Python < 3.11.
Therefore this is not applicable for us.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Extend the linux-tools package to also build the userspace USB tools,
which currently include testusb and ffs-test.
These tools are in the kernel tree since a long time, and althogh a
Makefile had been present since kernel 2.6.39, it has been entirely
rewritten (with an install rule) back with kernel 5.9, to allow building
the same way as other tools provided with the kernel.
We make use of the Makefile install rule, thus version >= 5.9 is
required. Support for older kernels may be added later if needed, and
is left as an exercise for the motivated party.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
[yann.morin.1998@free.fr: fix history of Makefile]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bagas is keen to maintain git package for Buildroot. However, due to
limited resources available, he can only do testing as far as
build testing. Other developers are needed to help him maintain the
package.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Provides python interface to database stored in hwdata
package. It allows you to get human readable description of
USB and PCI devices.
https://github.com/xsuchy/python-hwdata
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many of the C++ wrapper packages had API changes. These changes where
never introduced in gtkmm3, meaning that older, but still maintained
versions are needed to build gtkmm3.
Fixes:
- http://autobuild.buildroot.net/results/172/17263ac51f197031106eb7fd595126a2720f0397
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is the version needed for gtkmm3.
Note that 2.28 is indeed the latest version before 2.36. They skipped
versions 2.30, 2.32 and 2.34.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
shadow provides utilities to deal with user accounts.
The shadow package includes the necessary programs for converting UNIX
password files to the shadow password format, plus programs for managing
user and group accounts. Especially it is useful if rootless podman
container should be used, which requires newuidmap and newgidmap.
Co-authored-by: Nicolas Carrier <Nicolas.Carrier@orolia.com>
[Nicolas.Carrier@orolia.com provided the test case]
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package has been orphan since commit ee58353 (2018-12-22).
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Shyam's email address at Savoir Faire Linux is bouncing, so drop they
from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
XServer to run X clients under wayland
This XServer is required to run the X clients under Wayland compositor,
for example weston or wlroots based compositors.
Signed-off-by: Raphael Pavlidis <raphael.pavlidis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Catch2 is a modern C++ unit testing framework which is increasing in
popularity.
This package is staging only and allows to build tests to be run on
the target.
- https://github.com/catchorg/Catch2
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
