Add support the build the firmware for QEMU i386 pc machine
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- do not make it available for BR2_x86_64
- introduce BR2_TARGET_EDK2_ARCH_SUPPORTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When Grub2 is build it is configured only for one boot set-up, BIOS Legacy,
EFI 32 bit or EFI 64 bit. It can not deal with several boot set-up on the
same image.
This patch allows to build Grub2 for different configurations simultaneously.
To cover Grub2 configuration of legacy BIOS platforms (32-bit), 32-bit EFI
BIOS and 64-bit EFI BIOS in the same build, multi-build system felt much more
reasonable to just extend the grub2 package into 3 packages.
We can no longer use autotools-package as a consequence of this multi-build, and
we have to resort to generic-package and a partial duplication of
the autotools-infra. Grub2 was already using custom option like --prefix or
--exec-prefix so this won't add much more weirdness.
We use a GRUB2_TUPLES list to describe all the configurations selected.
For each boot case described in the GRUB2_TUPLES list, it configures and
builds Grub2 in a separate folder named build-$(tuple).
We use a foreach loop to make actions on each tuple selected.
We have to separate the BR2_TARGET_GRUB2_BUILTIN_MODULES and the
BR2_TARGET_GRUB2_BUILTIN_CONFIG for each BIOS or EFI boot cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- keep sub-options properly indented
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The startup.nsh file is useless to boot EFI payloads. We just need to
follow the naming detection specified in the UEFI spec.
The EFI payload need to be placed in the boot/efi folder in the EFI partition
and follow the architecture naming as described below:
32bit : bootia32.efi
x64 : bootx64.efi
aarch32 : bootarm.efi
aarch64 : bootaa64.efi
This naming is already right in the packages involved (systemd, grub2,
gummiboot), therefore we just need to drop the generation of the
startup.nsh file.
The usage of the startup.nsh in genimage is also dropped to avoid errors in
the image generation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Syslinux use some python scripts during the build and they
are using python interpreter by default. It fail to build
when there is no python interpreter on the host.
[...]/syslinux-6.03/com32/cmenu/menugen.py
make[6]: python: No such file or directory
Since Syslinux 5.00, we can override the python interpreter
used during the build:
https://repo.or.cz/syslinux.git/commitdiff/4dec62ce9c2c0d170f21b3ae2d7c618eb7a30c05
Add the missing host-python3 dependency and override
it in SYSLINUX_BUILD_CMDS.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/1614446766
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since v2.2 release (commits 8cc36aec912 "doc: De-duplicate readme and
license files" and 9f1622b018ab "doc: Move content out of readme and
create new index page "), the license.rst file at the root of the git
repo is only telling to look at docs/license.rst file.
Let's point the ARM_TRUSTED_FIRMWARE_LICENSE_FILES to the correct file
and modify the .hash file accordingly.
The comment has also been wrong since we bumped from version 1.4 to 2.2
in commit a757d173f1 (boot/arm-trusted-firmware: bump to version
2.2). Drop referencing an explicit version, so that is is never wrong
again.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[yann.morin.1998@free.fr: also fix the comment.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 2cfdf8b8a2 (boot/mv-ddr-marvell: Bump to HEAD as of 20201207)
forgot to update the hash a a source file that we use as license file.
Fixes: #14221
Reported-by: nyanyamiau@gmail.com
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: D. Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The mainline U-Boot can create an i.MX specific firmware image (e.g. flash.bin).
For this the i.MX firmware files (DDR, HDMI) must be in the toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: simplify hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If the ATF binary is used by U-Boot, the file is expected to be in the
toplevel directory.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similarly to Uboot, this patch adds the ability to copy in and build
out-of-source device tree sources during an ATF build.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to AT91Bootstrap 4.0.0 version.
This package is now released under MIT license, and a license file was
added.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 5f432df7e2 ("boot/arm-trusted-firmware: change
ENABLE_STACK_PROTECTOR value when disabled") set
ENABLE_STACK_PROTECTOR=0 when disabled. But since we pass this value as
MAKE_OPT, the internal ATF logic that sets ENABLE_STACK_PROTECTOR again
based on its initial value breaks. This leads to build failure:
make[1]: *** [/builds/buildroot.org/buildroot/output/build/arm-trusted-firmware-v2.4/build/a80x0_mcbin/release/libc/assert.o] Error 1
aarch64-buildroot-linux-uclibc-gcc.br_real: error: unrecognized command-line option ‘-fstack-protector-0’; did you mean ‘-fstack-protector’?
Move ENABLE_STACK_PROTECTOR to make environment instead to allow make to
change its value.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1497663294
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit
cf176128ec ("boot/arm-trusted-firmware:
add SSP option"), we are passing ENABLE_STACK_PROTECTOR=none when we
want to disable SSP usage in TF-A. While this works fine in recent
versions of TF-A, older versions such as TF-A will end up passing
-fstack-protector-none in this situation, which fails as this is not a
valid gcc option (the valid gcc option is -fno-stack-protector).
To solve this, we pass ENABLE_STACK_PROTECTOR=0 which was in older
TF-A versions used to say "don't do anything with SSP", and is also
still supported in newer versions of TF-A.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1478738580
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Existing patch is for 3.13.0 optee version but is located at the root
of optee-os folder, leading to error when applying it on more recent
version. Move it to a dedicated 3.13.0 folder.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As Thomas put it:
The <pkg>_HELP_CMDS variable allows packages using the
kconfig-package infrastructure to display their specific
targets related to the handling of their configuration.
However, it was not consistently used and handled by the
different packages.
So, this commit switches all the kconfig-based package to use the
generic help helper.
As a consequence:
- all kconfig packages now advetise their kconfig-related actions,
where some were previously missing: at91bootstrap3, linux-backports,
swupdate, xvisor;
- busybox advertises it does not support defconfig files;
- the 'foo-savedfconfig' action is no longer advertised: it is to be
considered an internal implementation detail.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump OP-TEE OS package version to OP-TEE release 3.13.0.
Add a patch already merged OP-TEE to fix build issue seen with 3.13.0
on some BR toolchain.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If U-Boot CONFIG_OF_SEPARATE is defined [1], then the device tree will
be built and placed in a u-boot.dtb file alongside u-boot.bin.
When BR2_TARGET_UBOOT_FORMAT_DTB is enabled, buildroot will copy
u-boot.dtb to $(BINARIES_DIR).
This is useful for RISC-V platforms that want to build OpenSBI with an
external DTB by using FW_FDT_PATH [2].
[1] https://github.com/u-boot/u-boot/blob/master/doc/README.fdt-control
[2] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If U-Boot CONFIG_OF_SEPARATE is defined [1], then the device tree will
be built and placed in a u-boot.dtb file alongside u-boot.bin.
When BR2_TARGET_UBOOT_FORMAT_DTB is enabled, buildroot will copy
u-boot.dtb to $(BINARIES_DIR).
This is useful for RISC-V platforms that want to build OpenSBI with an
external DTB by using FW_FDT_PATH [2].
[1] https://github.com/u-boot/u-boot/blob/master/doc/README.fdt-control
[2] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When grub2 (i386-pc) is built with -O2 or -O3 it is unable to boot
and the system will reboot in a loop.
Tony Battersby has bisected [0] the error down to this security bugfix:
boot/grub2/0132-kern-parser-Fix-a-stack-buffer-overflow.patch
There is also a bug report by Peter Seiderer about this [1].
As discussed on the mailing list [2], this patch introduces a workaround
in the grub2.mk overriding the global optimization settings with -Os
which results in a booting system.
References:
[0] https://savannah.gnu.org/bugs/?60458
[1] https://bugs.busybox.net/show_bug.cgi?id=13586
[2] http://lists.busybox.net/pipermail/buildroot/2021-May/311524.html
Signed-off-by: Andreas Hilse <andreas.hilse@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot sets appropriate ENABLE_STACK_PROTECTOR build flag value based
on the toolchain global BR2_SSP_* options, and all packages are built
with that setting.
However it might not be always convenient to automatically infer TF-A
stack protection from the toolchain features. For instance, secure
memory constraints may become an issue and all the extra TF-A features
need to be tuned or disabled in order to shrink TF-A firmware image.
Besides, for any value other than "none", TF-A platform specific hook
'plat_get_stack_protector_canary' must be implemented. However this hook
is not implemented by all the platforms supported by TF-A. For instance,
Allwinner currently does not provide such a hook.
Add an new option that a user can toggle to enable or disable SSP in
their ATF build. If enabled, the SSP level is automatically inherited
from the global setting.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr: simplify logic with a single boolean]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update commit ID to include recent upstream fixes:
- Fix I and D cache synchronization issue (2e2f6faaf105)
- Add carriage return to correct menu formatting (2f6ea51dbb51)
- Add copyright info (7d3413d2ffd9)
- Expand the limit on the size of uboot when update it (623888127a0e)
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update the commit id to include upstream fixes:
- Fix print format in load_and_run_ddr(e976d186e69a)
- Update copyright info (f2b049b7fff2)
- Avoid chiplink address exception (86664be28e5d)
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release notes:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-5
The existing qemu_aarch64_sbsa_defconfig was using an unpinned version
of ATF, so to avoid any regression, it is pinned to the previous
version, 2.4.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: pin ATF version in qemu_aarch64_sbsa_defconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As spotted by Eugen, BR2_TARGET_AT91BOOTSTRAP3_NEEDS_PYTHON3 currently
is outside the at91bootstrap section, because it was inccorectly added
after the 'endif' statement rather than before, which makes the
menuconfig layout weird.
Move it around.
Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some at91bootstrap3 configurations now use Python scripts on the host
for NAND/PMEC related utilities. In order to be able to use those
scripts, this commit adds a new
BR2_TARGET_AT91BOOTSTRAP3_NEEDS_PYTHON3 which allows to express the
need for host-python3 as a dependency to build at91bootstrap3.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: this was extracted from a patch from Eugen adding
at91bootstrap 4.x support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The project at https://github.com/linux4sam/at91bootstrap was until
now releasing 3.x versions, which were packaged using
boot/at91bootstrap3/ in Buildroot. Microchip has now started a new
branch of at91bootstrap, called 4.x, which will only support the
following devices: sam9x60, sama5d2, sama5d3, sama5d4, sama7g5. A
number of older devices from Microchip will only be supported by the
existing 3.x series.
Therefore, we cannot simply remove support for the 3.x series, and
allow using only the 4.x series.
So what this commit does is extend the boot/at91bootstrap3 package to
support building both 3.x and 4.x versions. In detail, this implies:
* Having the BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION symbol point to
the latest 4.x version. Indeed, we want
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION to really point to the
latest upstream version, even if that means potential breakage for
users. Users who want to use a fixed version of at91bootstrap
should anyway not be using
BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION.
* Introduce BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X for users who
would like to use the latest 3.x series.
* Adjust the installation logic, as images to install are now in
build/binaries/*.bin instead of binaries/*.bin. In order to not
have to differentiate 3.x and 4.x, we simply use $(wildcard ...) to
expand the list of files to install.
* To make it clear that boot/at91bootstrap3 supports both 3.x and
4.x, we also update the prompt of the package.
at911bootstrap does not carry a license file; so far we were using
main.c as the license file, as it carries the license blurb. Now that we
have a known alternate version, we would need a per-version hash for
that file. However, this is a bit too cumbersome to handle, so just drop
using main.c as the license file. When upstream introduces a proper
license file, we can revisit the situation.
Update the two defconfigs that were using the upstream 3.9.3 version;
all other defconfigs are using custom tarballs or custom git trees.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[Thomas: while this patch is based on previous work by Eugen, it was
reworked quite significantly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop main.c as license file, explain why
- update the two defconfigs
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
EDK2 is a modern, feature-rich, cross-platform firmware development
environment for the UEFI and PI specifications.
The initial version of this bootloader package makes it possible to
build firmware for the following seven configurations:
* QEMU x86-64 pc machine
* QEMU aarch64 virt machine, booting directly from flash
* QEMU aarch64 virt machine, booting via the kernel protocol
* QEMU aarch64 sbsa-ref machine
* ARM FVP vexpress machine
* Socionext SynQuacer Developerbox
* SolidRun MacchiatoBin
Support the use of EDK2 UEFI payloads as BL33 in ARM Trusted Firmware.
Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr:
- duplicate defaults in Config.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the addition of support for custom opensbi version in commit
5c7166d387 (boot/opensbi: add support for version configuration), we can no
longer be sure that the license file name / hash will be correct in all
cases, so only specify COPYING.BSD when _LATEST_VERSION is used, similar to
how we do it for the Linux kernel.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the addition of support for custom opensbi version in commit
5c7166d387 (boot/opensbi: add support for version configuration), we can no
longer be sure that the Buildroot patches can be applied - So move them to a
0.9 subdir to ensure they are only applied when the _LATEST_VERSION is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3b551f68a5 (boot/beaglev-ddrlnit: rename to beaglev-ddrinit to
match renamed upstream repo) forgot to update the include in boot/Config.in,
breaking menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This packages allows to build the first stage bootloader used on the
BeagleV, which is used even before the DDR initialization and
OpenSBI/U-Boot. Yes, "secondboot" is strange for what is the first
stage bootloader, but that's the upstream name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- add hash file
- commit is HEAD only right now, so don't reference HEAD
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a package for the DDR initialization code used on the
BeagleV platform.
The typo in the package name is upstream's typo, and we just keep it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- upstream name is beaglev_ddrlnit, not *init (keep their typo)
- rename package and variables accordingly
- the referenced commit is no longer the HEAD of said branch
- add a hash file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
