Support for mongodb is added by the services/mongodb module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for modem-manager is added by the services/modemmanager module
in the SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for memcached is added by the services/memcached module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for lirc-tools is added by the services/lircd module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for openldap is added by the services/ldap module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for xl2tp is added by the services/l2tp module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for irqbalance is added by the services/irqbalance module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for iodine is added by the services/iodine module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for ifplugd is added by the services/ifplugd module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for gpsd is added by the services/gpsd module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for gpm is added by the services/gpm module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for git is added by the services/git module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for fetchmail is added by the services/fetchmail module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for fail2ban is added by the services/fail2ban module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for exim is added by the services/exim module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for drbd-utils is added by the services/drbd module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for dante is added by the services/dante module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for cvs is added by the services/cvs module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The open62541 tools directory is indeed 52 MiB, which built as a standalone package
named 'libopen62541-1-tools' in launchpad. Nothing is required at runtime.
See the official debian control file template:
https://raw.githubusercontent.com/open62541/open62541/master/debian/control-template
See https://launchpad.net/~open62541-team/+archive/ubuntu/ppa/+packages
libopen62541-1 Open source implementation of OPC UA - shared library
libopen62541-1-dev Open source implementation of OPC UA - development files
libopen62541-1-tools Open source implementation of OPC UA - tools
open62541-doc Open source implementation of OPC UA - documentation
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In case the setup.py file of a python package does not directly call the
'setup' method, utils/scanpypi was hoping there be a 'main' function which
would do the work, normally called via a construct like:
if __name__ == '__main__':
main()
However, this construct is nonstandard, and there are packages in PyPI which
call 'setup()' directly from the 'if' statement, without a main() method.
But scanpypi does not actually need to make such assumption: when loading
the module, it can decide the name to be '__main__', just as if setup.py
would be loaded interactively.
Additionally, remove some logic seemingly related to the previous trick of
calling 'main'. There should not be a problem in keeping already loaded
modules in sys.modules, as this is the purpose of sys.modules.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even though the directory containing a package's setup.py was added to
sys.path, some setup.py implementations rely on the fact that it is placed
in sys.path[0].
An example package is 'cram' which failed to be added with scanpypi:
Traceback (most recent call last):
File "utils/scanpypi", line 756, in <module>
main()
File "utils/scanpypi", line 703, in main
package.load_setup()
File "utils/scanpypi", line 303, in load_setup
setup = imp.load_module('setup', s_file, s_path, s_desc)
File "/usr/lib/python3.8/imp.py", line 234, in load_module
return load_source(name, filename, file)
File "/usr/lib/python3.8/imp.py", line 171, in load_source
module = _load(spec)
File "<frozen importlib._bootstrap>", line 702, in _load
File "<frozen importlib._bootstrap>", line 671, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 783, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "/tmp/scanpypi-2pzc5wb_/python-cram/cram-0.7/setup.py", line 44, in <module>
long_description=long_description(),
File "/tmp/scanpypi-2pzc5wb_/python-cram/cram-0.7/setup.py", line 20, in long_description
return open(os.path.join(sys.path[0], 'README.rst')).read()
FileNotFoundError: [Errno 2] No such file or directory: '.../buildroot/utils/README.rst'
The corresponding code from cram's setup.py is:
def long_description():
"""Get the long description from the README"""
return open(os.path.join(sys.path[0], 'README.rst')).read()
Indeed, the Python documentation says:
https://docs.python.org/3.8/library/sys.html#sys.path
"...
As initialized upon program startup, the first item of this list,
path[0], is the directory containing the script that was used to invoke
the Python interpreter.
..."
Fix this by inserting explicitly at index 0 instead of appending to
sys.path.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change clock_gettime option from yes/no style to disable/enable one
(still omitting the explicit disable to keep the configure logic
defaulting to yes in case no rdtsc is available)
- change to set all available configure options:
* '--enable-daemon': previous default
* '--disable-diagnostic': previous default
* '-disable-init': do not install init files as buildroot ships its
own sysv/systemd init files
* '--disable-nistest': disable tests, previous default
* '--disable-enttest': new option, disable tests
* '--disable-olt': previous default was yes, disable builtin test
* '--enable-tune': previous default
- add patch to fix uclibc compile (disable dependency on sys/auxv.h
introduced with upstream commit [1])
Changelog ([2]):
- made enttest configurable
- havegecmd.c - new command added to close the communication socket
[Werner Fink]
[1] 26d35af198
[2] https://github.com/jirka-h/haveged/releases/tag/v1.9.14
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add patch for qv4regexp_p to include c++ limits include (instead of plain
c limit.h)
Fixes:
In file included from jsruntime/qv4regexp_p.h:62,
from jsruntime/qv4regexp.cpp:40:
../3rdparty/masm/yarr/Yarr.h:46:44: error: ‘numeric_limits’ is not a member of ‘std’
46 | static const unsigned offsetNoMatch = std::numeric_limits<unsigned>::max();
| ^~~~~~~~~~~~~~
../3rdparty/masm/yarr/Yarr.h:46:59: error: expected primary-expression before ‘unsigned’
46 | static const unsigned offsetNoMatch = std::numeric_limits<unsigned>::max();
| ^~~~~~~~
- add patch for qqmlprofilerevent_p to include c++ limits include
Fixes:
In file included from qqmlprofilertypedevent_p.h:43,
from qqmlprofilertypedevent.cpp:40:
qqmlprofilerevent_p.h: In member function ‘void QQmlProfilerEvent::assignNumbers(const Container&)’:
qqmlprofilerevent_p.h:314:65: error: ‘numeric_limits’ is not a member of ‘std’
314 | static_cast<quint16>(numbers.size()) : std::numeric_limits<quint16>::max();
| ^~~~~~~~~~~~~~
qqmlprofilerevent_p.h:314:87: error: expected primary-expression before ‘>’ token
314 | static_cast<quint16>(numbers.size()) : std::numeric_limits<quint16>::max();
| ^
qqmlprofilerevent_p.h:314:90: error: ‘::max’ has not been declared; did you mean ‘std::max’?
314 | static_cast<quint16>(numbers.size()) : std::numeric_limits<quint16>::max();
| ^~~
| std::max
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-flex is needed to avoid the following build failure since bump to
version 4.14.3 in commit 7df2611e9e due to
942c0d2128
Checking for flex
Checking for program 'flex' : not found
Embedded Heimdal build requires flex but it was not found. Install flex or use --with-system-mitkrb5 or --with-system-heimdalkrb5
Fixes:
- http://autobuild.buildroot.org/results/b9ed8be51a0eef77d6e48755861ae266c3b9f811
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patches to fix the following build failure with suricata
raised since bump to version 6.0.3 in commit
4c429c3f8c
checking for libnetfilter_log/libnetfilter_log.h... no
configure: error: libnetfilter_log.h not found ...
Fixes:
- http://autobuild.buildroot.org/results/0b960f40b5d7e4bb0c4ba20638fe66a9e0964ab3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for collectd is added by the services/collectd module in the
SELinux refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SELinux support for sudo is added by the admin/sudo refpolicy module.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SELinux support for quota is provided by the admin/quota refpolicy
module.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for snort is added by the services/snort module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for cups is added by the services/cups module in the SELinux
refpolicy.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gdb can automatically load certain files as described in [1]. Such files
could install pretty-printers for complex data structures.
libstdcxx (C++ standard library) provided by gcc, is one example of a
library for which such auto-load file is available. But there are other
examples too, like libglib2.
However, gdb will only auto-load files if the file is located in one of the
locations treated as 'safe'. The Buildroot sysroot is not by default in that
list.
Provide a better debugging experience by adding the sysroot to the 'safe'
list, via the gdbinit file prepared by Buildroot.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gcc installs a libstdcxx-...so-gdb.py file that gdb will load automatically
when it loads libstdcxx.so, via the mechanism described at [1].
However, the auto-load file installed by gcc contains hardcoded paths
referring to the location where the (external) toolchain was built, which
are normally not available.
Fix up the paths in the load file so that the pretty printers can be loaded
automatically.
Note that gdb will only auto-load the file if its location is marked as
'safe'. A subsequent commit will take care of that.
Technically, there could be more than one load file, e.g. in lib and
usr/lib, so fix them all. This was for example observed in
BR2_TOOLCHAIN_EXTERNAL_ARM_AARCH64.
In a very specific case with a local custom toolchain, there were actually
two 'python' directories, which would break the sed command, so arbitrarily
limit to the first one encountered.
[1] https://sourceware.org/gdb/onlinedocs/gdb/objfile_002dgdbdotext-file.html
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When enabling Python 3 support in gdb < 10, gdb segfaults at startup.
The issue is was resolved by the following upstream gdb commit,
present since gdb 10.1:
commit c47bae859a5af0d95224d90000df0e529f7c5aa0
Author: Kevin Buettner <kevinb@redhat.com>
Date: Wed May 27 20:05:40 2020 -0700
Fix Python3.9 related runtime problems
[...]
This commit backports this fix to all relevant gdb versions supported
in Buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- overwrite cross-compiled mariadb_config executable (used from the
mysql_config script) by a native/host compiled one
Fixes (qt5base configure):
Trying source 0 (type mysqlConfig) of library mysql ...
+ .../host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mysql_config --version
> .../host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mysql_config: line 100: \
.../host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mariadb_config: cannot execute binary file: Exec format error
with
$ file host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mariadb_config
host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/mariadb_config: ELF 64-bit LSB pie executable, ARM aarch64, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-aarch64.so.1, for GNU/Linux 5.10.0, with debug_info, not stripped
Reported-by: Scott Bartolett <SBartolett@thorlabs.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- rebase 001-add-extra-check-for-librt.patch
- for changelog see [1], [2]
Fixes:
CMake Error at libmariadb/cmake/ConnectorName.cmake:30 (ENDMACRO):
Flow control statements are not properly nested.
Call Stack (most recent call first):
libmariadb/CMakeLists.txt:423 (INCLUDE)
[1] https://mariadb.com/kb/en/mariadb-10329-changelog/
[2] https://mariadb.com/kb/en/mariadb-10330-changelog/
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update lib{mtd,ubi}.h path to fix the following build failure raised
since bump of swupdate to version 2021.04 in commit
2c6b0359c3:
In file included from corelib/mtd-interface.c:21:
include/flash.h:13:10: fatal error: libmtd.h: No such file or directory
13 | #include <libmtd.h>
| ^~~~~~~~~~
This build failure is raised because of
0c672866d4
Fixes:
- http://autobuild.buildroot.org/results/d475bdb341d2afecf12e404dfa093e58221b9882
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Create a symlink for libglx.so and drop libnvidia-wfb.so (aka libwfb.so)
since all selectable xserver versions in Buildroot provide their own.
VDPAU libraries should be installed into /usr/lib/vdpau/
https://download.nvidia.com/XFree86/Linux-x86_64/390.67/README/installedcomponents.html
Also, allow specifying target subdirectory per library and respect it in
the install loop.
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Parallelizes locale generation based on `BR2_JLEVEL` setting.
Locale generation always runs during the finalize stage and can consume
a significant amount of time. Parallelizing it greatly reduces that time
on multi-core machines.
To parallelize it, we first invoke `localedef` for every locale in
parallel with the `--no-archive` option. This creates the intermediate
locale data instead of writing to the finally archive directly.
Then, we invoke `localedef` again once to create the archive from the
intermediate compiled locale data files.
We have to do it this way because `localedef` does not do any locking
when writing to the archive file, so calling it without `--no-archive`
concurrently could result in a corrupt archive file or an archive file
that is missing some locales.
While we're at it, make two additional improvements:
- Remove locale-archive before adding to it. Otherwise, repeated
applications of target-finalize will keep on growing the file.
- Sort the locales when creating locale-archive so its contents are
reproducible.
We use `find` to collect the installed locales rather than LOCALES. This
makes it possible for something else (skeleton, overlay, custom package)
to create and install additional locales and still have them added to
locale-archive.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[Arnout:
- Remove -j$(PARALLEL_JOBS), it's already part of $(MAKE)
- Remove HOST_DIR, TARGET_DIR, STAGING_DIR, they're already exported
- Extend commit message
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
