This moves some configs in the defconfigs and removes some comments so
the defconfig files look similar.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs the new Raspberry Pi 5 BCM2712D0 device-tree blob[1].
[1]: 0328374ae0
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs the device-tree blobs for the Compute Module 4 and Compute
Module 4s.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs the device-tree blob for the Raspberry Pi 400.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are two kind of device-tree blobs up to the Rasperry Pi 3[1][2]:
- the downstream dtbs are named after the die name (i.e. BCM27xx)
- the upstream dtbs are name after the package name (i.e. BCM283x)
Every defconfigs install exclusively the downstream device-tree blob, at
the exception of the raspberrypi3_64_defconfig that installs both since
the begining.
This removes the upstream device-tree blob for the beauty of
consistency.
Note: It is possible to load the upstream device-tree using the
upstream_kernel property[3].
Raspberry Pi, Compute Module, Raspberry Pi Zero and Raspberry Pi Zero W
use bcm2835 for upstream and bcm2708 for downstream.
Raspberry Pi 2 uses bcm2836 for upstream and bcm2709 for downstream.
Raspberry Pi 2 rev 1.2, Raspberry Pi 3, Compute Module 3/3+ and
Raspberry Zero 2 W use bcm2837 for upstream and bcm2709 for downstream.
Raspberry Pi 4/400 and Compute Module 4/4s uses bcm2711 and Raspberry Pi
5 uses bcm2712.
[1]: https://github.com/raspberrypi/linux/issues/3237
[2]: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#flagship-series
[3]: https://www.raspberrypi.com/documentation/computers/legacy_config_txt.html#upstream_kernel
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs the device-tree blob for the Compute Module 3.
Note: The 32-bit raspberrypi3_defconfig installs this Device Tree
since a726c7dff8
(configs/raspberrypi3_defconfig: add raspberry pi 3 compute module
support).
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This installs Raspberry Pi Model B rev 1.0 device-tree blob.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a board config to support the am62ax-sk reference board for TI's
AM62Ax SoC family.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
[Romain:
- add Upstream: tag in the kernel patch
- use BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62ax"
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The patch bumps the Linux kernel to version 6.8.12 and U-Boot to version
2024.07.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The defconfig fails in uboot build, with output:
In file included from tools/imagetool.c:10:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig.
Fixes: 0e1b6ab700
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Bump Linux to 6.6 and U-Boot to 2024.01.
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
[Romain:
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Switch to extlinux instead of U-Boot boot script. Drop custom
boot script and genimage config. Instead use common orangepi
files from board/orangepi/common.
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This patch switches the board support of the Radxa Rock 5B from
using a custom kernel to mainline linux 6.7.4. Thereby patches,
which became redundant, are removed, as well as device tree
modifications and no longer needed hash files. The needed ethernet
drivers are activated via the kernel config fragment file. Also the
board support is switched from using a uboot script and a uEnv file
to using extlinux.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Now that the configurations of boards stm32mp157a-dk1 and stm32mp157c-dk2
have the same software versions, it is possible to share the hash files as
well.
The patch uses the hash files for Arm Trusted Firmware, Linux, Linux
headers and U-Boot of stm32mp175a_dk1 also for stm32mp175c_dk2, and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch, following the suggestion expressed in [1], aligns the
software versions of stm32mp157a_dk1 to stm32mp157c_dk2. Indeed, the two
boards have many more similarities than differences.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20240713130847.4097389-1-dario.binacchi@amarulasolutions.com
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps U-Boot to version 2024.07.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps U-Boot to version 2024.07.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes commit 51b4421758 (configs/raspberrypi*: bump kernel version
to 17f135b (6.6.28)).
Fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm2710-rpi-3-b.dtb'. Stop.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 6.1.98.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build an AArch64 U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on the Arm A-Profile Base RevC AEM FVP.
The generated firmware binaries can also be used to run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM M2 (SystemMaster M2) Board is an add-on board which provides
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.68
- mainline U-Boot 2023.10
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Romain:
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
- enable BR2_KERNEL_HEADERS_AS_KERNEL for linux-headers to avoid specify
BR2_KERNEL_HEADERS_6_1
- make sure to use uuu from HOST_DIR in flash.sh
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This patch adds a new defconfig for Cubieboard1 made by Cubietech. It is
based on the Allwinner A10 SoC. See:
http://www.cubietech.com/product-detail/cubieboard1.
The defconfig uses upstream U-Boot and Linux.
Signed-off-by: Gero Schwäricke <gero.schwaericke@posteo.de>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beaglev_defconfig was meant for BeagleV-Starlight prototype waiting
for the arrival of the official revision. But BeagleV-Starlight was
never produced [1].
BeagleV-Starlight is nowadays superseded by the Beaglev-Ahead board [2].
[1] https://forum.beagleboard.org/t/the-future-of-beaglev-community/30463
[2] https://www.beagleboard.org/boards/beaglev-ahead
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beaglebone board files from beagleboard.org project should be
moved to board/beagleboard directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beagleboneai board files from beagleboard.org project should be
moved to board/beagleboard directory.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump TF-A to v2.9
Bump U-Boot to v2024.07
Bump Linux to v6.0
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 6.6.39 and U-Boot to version
2024.07.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The beagleboardx15 boards files should be moved to
board/beagleboard directory but doing so we noticed that
beagleboardx15_defconfig was failing to build on Buildroot's
Gitlab-Ci [1] due too old BSP (uboot 2016.11 and kernel 4.9)
built with the internal toolchain.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/7314633702
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Add support for the BeagleV Fire, the Beagleboard SBC powered by
Microchip's PolarFire SoC.
The configuration file is beaglev_fire_defconfig. It builds a
bootable kernel image with an embedded root file system. The image
built can be flashed to the board using the eMMC.
The yaml configuration file is used by the hss payload generator. It
maps the ELF binaries or binary blobs to the application hart.
The image generator script sets the partitions of the image.
The image tree souce file creates a FIT image.
The post image script creates the payload using the payload generator
host package and finally, creates the FIT image using the ITS after the
kernel build. It also creates the BMAP file for use with the BMAP
command line tool to transfer the image to the board.
The U-Boot script and additional U-Boot configurations ensure that
U-Boot behaves as expected for the BeagleV-Fire and boots the FIT image.
The rootfs-overlay contains script for updating the BeagleV-Fire
gateware.
The README.txt documents how to build and boot the Beagle-V Fire with
this configuration. It also explains how to program a custom bitstream.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
[Romain:
- move board files to board/beagleboard directory
- enable BR2_DOWNLOAD_FORCE_CHECK_HASHES and add hashes files
- enable BR2_KERNEL_HEADERS_AS_KERNEL for linux-headers to avoid specify
BR2_DEFAULT_KERNEL_VERSION
- add BR2_PACKAGE_HOST_DOSFSTOOLS for mkdosfs (host variant)
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
- Bump Linux kernel to v6.8.10.
The Devicetree has moved; update our config accordingly.
- Bump U-Boot to 2023.04.
This is the most recent version we can use as U-Boot 2023.07 dropped
support for the uevm.
OpenSSL is now required for the build.
The default boot method has changed; switch to booting with an extlinux
configuration to overcome this.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit [1] introduced a new spike_riscv32_defconfig with Kernel
at v6.6.35.
This commit bumps the Kernel of spike_riscv64_defconfig to have it
aligned with its 32bit counterpart.
This commit also adds custom hashes. Therefore, it adds
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in the defconfig, adds a global
patch directory, and removes the entry in ".checkpackageignore".
Finally, to completely align with the spike_riscv32_defconfig, the
config directive BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM is moved by few
lines.
With this commit, the maintenance of the two spike_riscv{32,64}
defconfigs will be easier.
[1] a83ab3f4c8
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zynqmp_kria_kd240_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Migrated u-boot to xilinx_zynqmp_kria_defconfig, so uboot.fragment no longer
needed.
With u-boot 2024.1, CONFIG_SYS_SPI_U_BOOT_OFFS has a new meaning. It is now
the offset between the base address of the boot.bin and u-boot.itb instead of
a raw base address of u-boot.itb. This allows for A/B firmware updates since
the u-boot.itb is set by default to a 0x80000 offset of the boot.bin.
Thus, Kria SOMs come with the following QSPI address table.
Partition A:
0x200000 - boot.bin
0x280000 - u-boot.itb
Partition B:
0xF80000 - boot.bin
0x1000000 - u-boot.itb
In addition, the kd240 still requires a board specific patch for the usb to sd
card bridge device. Without the board specific patch in the
./board/zynqmp/kria/kd240/patches directory, the usb will not come up correctly
and u-boot will not be able to find the sd card containing the Linux kernel and
file system.
Upstream: https://patchwork.ozlabs.org/project/uboot/patch/20240604083854.2033917-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit [1] updated riscv-isa-sim (Spike), which now includes
a NS16550 uart emulation. This can be used by RV32 Linux Kernel. This
commit introduce a defconfig for running Linux on Spike RISC-V 32-bit
ISA simulator.
[1] 853b7661bf
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch adds .hash files for Arm trusted firmware, Linux, Linux headers
and U-Boot and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we
can now drop the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The chromebook-snow config uses a custom kernel version, so add a hash
for it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
We're going to add hashes soon, so we'll need to have that directory
populated with hash files, and it would then be a bit confusing to not
have the patch file in the patches directory...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.162 for both
configurations and U-Boot to version 2024.04 for the SD one. Using the
same kernel will subsequently allow adding the hash files in a single
location.
Furthermore, now even the xip configuration uses the same headers as
the used Linux kernel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch bumps the Linux kernel to version 5.15.162 and U-Boot to
version 2024.04.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot commit [1] updated riscv-isa-sim (Spike), which now includes
a NS16550 uart emulation. The Kernel config fragment was introduced to
work with older HTIF interface from Spike.
For more information about the HTIF/NS16550 in Spike, see the commit
log [2].
This commit removes this Kernel config fragment, since it is no longer
needed.
[1] 853b7661bf
[2] 38c581b05c
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.8.10.
- Bump the FVP in the readme to version 11.25 build 15.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the stmmac driver is configured as a module in the defconfig, which
means that the network functionality is not available until the driver module
is manually inserted.
Use extra config fragment to integrate it directly into the kernel, ensuring that network
functionality is available immediately upon boot.
Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version are changed to 6.6.32 (LTS) for all qemu defconfigs.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu 9.0.0/9.0.1 has introduced a Bug in sh4/sh4eb emulation so
that the system doesn't boot anymore.
The issue is already reported by Guenter Roeck:
https://lists.nongnu.org/archive/html/qemu-devel/2024-05/msg00606.html
Switch to initramfs for sh4/sh4eb emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
commit d9e6d2d081 "configs/visionfive2: update kernel to upstream
6.8.2" removed the config directive:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
but forgot to add:
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_8=y
It was most likely generated with a "make savedefconfig", while Linux
kernel v6.8 was the default at that time. After commit aa70c331a2
"linux: bump latest version to 6.9", the defconfig failed to build
with error:
Incorrect selection of kernel headers: expected 6.9.x, got 6.8.x
This commit fixes the defconfig by adding back the kernel custom header
version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7271150175
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of downloading a different version of the kernel for the headers as
for the runtime kernel itself, use the same one. By doing so, we now need
to add the hash file for linux-headers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_zcu104_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This configuration builds an image for the RaspberryPi 5.
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
[yann.morin.1998@free.fr: check hashes]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7019514677
The kernel build needs host-openssl since commit 9982e0b5a6
(configs/qemu: update defconfigs to Linux 6.6.18), so enable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/7019514688
The kernel build needs host-openssl since commit 9982e0b5a6
(configs/qemu: update defconfigs to Linux 6.6.18), so enable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch adds the .hash file for Linux, which then allow to enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Note that the defconfig uses linux-headers that are not the same as
the kernel (although the same series), and instead use the 6.1.x
version from the linux-headers package choice. So we don't need to
add a .hash file for linux-headers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr: don't add linux-headers symlink; explain why]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch moves the linux and uboot hashes from 'board/zynq/patches' to
'board/xilinx/patches'. The reason for this is that all of the Xilinx boards
including zynq, zynqmp and versal will be using the same linux and uboot repo.
By putting the hashes in 'board/xilinx/patches', the same hashes can be shared
amongst all of the Xilinx boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_kria_kr260_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Migrated u-boot to xilinx_zynqmp_kria_defconfig, so uboot.fragment no longer
needed.
With u-boot 2024.1, CONFIG_SYS_SPI_U_BOOT_OFFS has a new meaning. It is now
the offset between the base address of the boot.bin and u-boot.itb instead of
a raw base address of u-boot.itb. This allows for A/B firmware updates since
the u-boot.itb is set by default to a 0x80000 offset of the boot.bin.
Thus, Kria SOMs come with the following QSPI address table.
Partition A:
0x200000 - boot.bin
0x280000 - u-boot.itb
Partition B:
0xF80000 - boot.bin
0x1000000 - u-boot.itb
This patch updates the addressing in the readme.txt accordingly.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PMUFW xilinx-v2024.1
Migrated u-boot to xilinx_zynqmp_kria_defconfig, so uboot.fragment no longer
needed.
With u-boot 2024.1, CONFIG_SYS_SPI_U_BOOT_OFFS has a new meaning. It is now
the offset between the base address of the boot.bin and u-boot.itb instead of
a raw base address of u-boot.itb. This allows for A/B firmware updates since
the u-boot.itb is set by default to a 0x80000 offset of the boot.bin.
Thus, Kria SOMs come with the following QSPI address table.
Partition A:
0x200000 - boot.bin
0x280000 - u-boot.itb
Partition B:
0xF80000 - boot.bin
0x1000000 - u-boot.itb
This patch updates the addressing in the readme.txt accordingly.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps the versal_vck190_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
- ATF v2.10
- PLM xilinx-v2024.1
- PSMFW xilinx-v2024.1
Removed ATF patches that were needed for ATF v2.8.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch adds .hash files for Arm trusted firmware, Linux, Linux headers
and U-Boot and then enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we
can now drop the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The patch adds .hash files for Linux, Linux headers and U-Boot and then
enables BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bumping to TI's most recent Linux 4.19 version (i.e. linux-4.19.94-ti-r72)
does not fix compilation errors but allows you to cleanly apply the
necessary patches.
Two errors have been fixed:
1 Since commit e88225ed88 ("package/binutils: make 2.41 the default
version"), the Linux kernel is failing to build with this output:
arch/arm/mm/proc-v6.S:267: Error: junk at end of line, first unrecognized character is `#'
make[3]: *** [scripts/Makefile.build:403: arch/arm/mm/proc-v6.o] Error 1
The patch [1] fixes the issue.
2 Since commit dc0f7215c6 ("package/gcc: switch to 13.x as default"),
the Linux kernel is failing to build with this output:
In file included from ./include/linux/kernel.h:10,
from drivers/ata/libahci.c:35:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
./include/linux/compiler.h:348:45: error: call to ‘__compiletime_assert_1154’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
348 | _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
The patch [2] allows to cleanly apply patch [3] that fixes the issue.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=762d2dcd9e233e3025f8627ea65f23e568045edb
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=67a00c299c5c143817c948fbc7de1a2fa1af38fb
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4c3ddc06cedb62f2904e58fd95170bf206bee149
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel failed to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). The new version contains the commit
790756c7e0229 ("ARM: 8933/1: replace Sun/Solaris style flag on section
directive") that fixes the issue.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel failed to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). The new version contains the commit
790756c7e0229 ("ARM: 8933/1: replace Sun/Solaris style flag on section
directive") that fixes the issue.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_microzed_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zed_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc706_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynq_zc702_defconfig to xilinx-v2024.1 which includes
the following updates:
- Linux v6.6.10
- U-Boot v2024.01
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Furthermore, the use of the directory board/atmel/at91sam9x5ek/patches
for all 4 at91sam9x5ek*_defconfig configurations automatically fixes the
Linux compilation failure for the at91sam9x5ek_defconfig,
at91sam9x5ek_mmc_defconfig, and at91sam9x5ek_mmc_dev_defconfig
configurations as well.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: fix u-boot hash]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop
the defconfig from .checkpackageignore.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel failed to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). The new version contains the commit
790756c7e0229 ("ARM: 8933/1: replace Sun/Solaris style flag on section
directive") that fixes the issue.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fails in uboot build, with output:
In file included from tools/imagetool.c:10:
include/image.h:1178:12: fatal error: openssl/evp.h: No such file or directory
1178 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/6918689164
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel fails to build since commit e88225ed88 (package/binutils:
make 2.41 the default version). This commit applies the backport patch of
upstream commit 790756c7e0229dedc83bf058ac69633045b1000e to the 4.19.y
stable kernel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: extend description to mention binutils 2.41]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit dc0f721 "package/gcc: switch to 13.x as default",
mx51evk_defconfig is failing to build in Kernel (see [1]),
with output:
drivers/ata/libahci.c: In function 'ahci_led_store':
././include/linux/compiler_types.h:315:45: error: call to '__compiletime_assert_328' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
This commit fixes the issue by bumping the Kernel to 5.10.218.
The kernel commit fixing the build failure is [2], first included in
v5.10.184. There is also many other gcc-13 fixes.
While bumping the Kernel, this commit also enables
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y, add the relevant archive hash files,
and removes the defconfig entry in ".checkpackageignore".
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/6918688967
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4c3ddc06cedb62f2904e58fd95170bf206bee149
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add global patch directory pointing to board specific .hash files
for uboot, linux, linux-headers and add BR2_DOWNLOAD_FORCE_CHECK_HASHES.
This way we can drop this defconfig entry in .checkpackageignore.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2e349be94a (configs/orangepi_pc_defconfig: bump U-boot to
v2024.01 to fix compatibility with setuptools >= 69) bumped U-Boot, but
forgot to add a dependency on host-openssl. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6918689094
Commit 113eeb55d6 (configs/orangepi_r1_defconfig: bump U-boot to v2024.01
to fix compatibility with setuptools >= 69) bumped U-Boot, but forgot to add
a dependency on host-openssl. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fails in uboot build, with output:
scripts/sign-file.c:25:10: fatal error: openssl/opensslv.h: No such file or directory
25 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
This commit fixes the issue by adding
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the defconfig.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/6929002318
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build fails with gcc 13 with:
drivers/ata/libahci.c: In function 'ahci_led_store':
././include/linux/compiler_types.h:357:45: error: call to
'__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed:
sizeof(_s) > sizeof(long)
357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
As explained in Linux commit[0] that fixes the build, sizeof() of enum
like '(1<<31)' translate to a 64-bit type, but we expect a 32-bit type.
So commit[0] makes sure the data type to be 32-bits wide by using BIT()
macro.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6865596548
[0]:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=97e28deab8bfe70d5687650f94484f8f9101e566
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 5.10.9 kernel fails to build with GCC 13.x:
In file included from <command-line>:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
././include/linux/compiler_types.h:315:45: error: call to ‘__compiletime_assert_321’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:296:25: note: in definition of macro ‘__compiletime_assert’
296 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:315:9: note: in expansion of macro ‘_compiletime_assert’
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:9: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
./include/linux/nospec.h:58:9: note: in expansion of macro ‘BUILD_BUG_ON’
58 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
| ^~~~~~~~~~~~
drivers/ata/libahci.c:1137:23: note: in expansion of macro ‘array_index_nospec’
1137 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
| ^~~~~~~~~~~~~~~~~~
This is fixed upstream by commit f07788079f515ca (ata: ahci: fix enum
constants for gcc-13), which has been backported to 5.10.x as of 5.10.184,
so bump to v5.10.217 to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597706
setuptools.extern.packaging.version.InvalidVersion: Invalid version: 'u-boot-2020.10'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:30: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:419: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:419: scripts/dtc] Error 2
make[2]: *** [Makefile:577: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2020.10/.stamp_built] Error 2
Commit 6b62384e3d (package/python-setuptools: bump to version 69.0.3)
bumped setuptools, which now errors out when passed a version with a prefix
string. This u-boot- prefix string is dropped since U-Boot 2023.01 with
commit c977b1843504 (libfdt: Fix invalid version warning), so bump U-Boot to
v2024.01 to fix this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
And update the dts path to match the updated location after commit
724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories").
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 5.10.10 kernel fails to build with GCC 13.x:
In file included from <command-line>:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
././include/linux/compiler_types.h:315:45: error: call to ‘__compiletime_assert_321’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:296:25: note: in definition of macro ‘__compiletime_assert’
296 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:315:9: note: in expansion of macro ‘_compiletime_assert’
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:9: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
./include/linux/nospec.h:58:9: note: in expansion of macro ‘BUILD_BUG_ON’
58 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
| ^~~~~~~~~~~~
drivers/ata/libahci.c:1137:23: note: in expansion of macro ‘array_index_nospec’
1137 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
| ^~~~~~~~~~~~~~~~~~
This is fixed upstream by commit f07788079f515ca (ata: ahci: fix enum
constants for gcc-13), which has been backported to 5.10.x as of 5.10.184,
so bump to v5.10.217 to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597717
setuptools.extern.packaging.version.InvalidVersion: Invalid version: 'u-boot-2020.10'
make[5]: *** [scripts/dtc/pylibfdt/Makefile:30: scripts/dtc/pylibfdt/_libfdt.so] Error 1
make[4]: *** [scripts/Makefile.build:419: scripts/dtc/pylibfdt] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:419: scripts/dtc] Error 2
make[2]: *** [Makefile:577: scripts] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2020.10/.stamp_built] Error 2
Commit 6b62384e3d (package/python-setuptools: bump to version 69.0.3)
bumped setuptools, which now errors out when passed a version with a prefix
string. This u-boot- prefix string is dropped since U-Boot 2023.01 with
commit c977b1843504 (libfdt: Fix invalid version warning), so bump U-Boot to
v2024.01 to fix this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Fixes the following warning:
orangepi_r1_defconfig:35:warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
While we're at it, move the HOST_UBOOT_TOOLS_* options where savedefconfig
would put them.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
This commit bumps the BSP components (U-Boot, Arm Trusted Firmware
and Kernel) to version tn-mickledore_6.1.55-2.2.0_20240417.
While at it, it also enable BR2_DOWNLOAD_FORCE_CHECK_HASHES=y in the
defconfig, to check the archives of this new version. The necessary
hash files are also added. The BR2_GLOBAL_PATCH_DIR moved, due to a
defconfig refresh with a "make savedefconfig".
This commit also removes arm-truster-firmware package patches which
are no longer needed (since they are included in the new version).
Finally, this defconfig fail to build since commit dc0f721
"package/gcc: switch to 13.x as default". Those new BSP components
contains the patches to fix this build issue.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6865597270
Signed-off-by: Julien Olivain <ju.o@free.fr>
[Romain: remove imx8mmpico_defconfig entry in .checkpackageignore]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. With this, we can now drop the
defconfig from .checkpackageignore.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
The 5.10.79 kernel fails to build with GCC 13.x:
In file included from <command-line>:
drivers/ata/libahci.c: In function ‘ahci_led_store’:
././include/linux/compiler_types.h:315:45: error: call to ‘__compiletime_assert_321’ declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^
././include/linux/compiler_types.h:296:25: note: in definition of macro ‘__compiletime_assert’
296 | prefix ## suffix(); \
| ^~~~~~
././include/linux/compiler_types.h:315:9: note: in expansion of macro ‘_compiletime_assert’
315 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
| ^~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:50:9: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
50 | BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
| ^~~~~~~~~~~~~~~~
./include/linux/nospec.h:58:9: note: in expansion of macro ‘BUILD_BUG_ON’
58 | BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
| ^~~~~~~~~~~~
drivers/ata/libahci.c:1137:23: note: in expansion of macro ‘array_index_nospec’
1137 | pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
| ^~~~~~~~~~~~~~~~~~
This is fixed upstream by commit f07788079f515ca (ata: ahci: fix enum
constants for gcc-13), which has been backported to 5.10.x as of 5.10.184,
so bump to v5.10.217 to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Generated by utils/add-custom-hashes, with the (redundant)
linux-headers.hash replaced by a symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: update .checkpackageignore]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6813125272
The Linux kernel fails to build since commit e88225ed88 (package/binutils:
make 2.41 the default version):
arch/arm/mm/proc-feroceon.S: Assembler messages:
arch/arm/mm/proc-feroceon.S:587: Error: junk at end of line, first unrecognized character is `#'
make[3]: *** [scripts/Makefile.build:430: arch/arm/mm/proc-feroceon.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Fix the build by bumping the kernel to 4.14.336, which includes commit
3ab03df64f77 (ARM: 8933/1: replace Sun/Solaris style flag on section
directive):
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.14.y&id=3ab03df64f7754728a2257c47775a70a88428331
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This refers to https://gitlab.com/buildroot.org/buildroot/-/jobs/6813124907
The build error referenced in that link is:
error: command 'swig' failed: No such file or directory
make[4]: *** [scripts/dtc/pylibfdt/Makefile:33: rebuild] Error 1
make[3]: *** [scripts/Makefile.build:397: scripts/dtc/pylibfdt] Error 2
make[2]: *** [Makefile:2014: scripts_dtc] Error 2
make[1]: *** [package/pkg-generic.mk:283: /builds/buildroot.org/buildroot/output/build/uboot-2024.01/.stamp_built] Error 2
make: *** [Makefile:82: _all] Error 2
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT is added to the avenger96_defconfig in order to resolve the issue
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update kernel, TF-A and U-Boot repos to the NXP lf-6.6.3-1.0.0 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable networking for better user experience.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BINFMT_FLAT_SHARED was removed in the Linux Kernel by commit:
70578ff3367dd4ad8f212a9b5c05cffadabf39a8
It was m68k specific and got recently disabled in uClibc-ng, too.
See this commit:
https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=72b01dd20f9cea273809e3437b4aba849ae658af
Now that only BINFMT_FLAT_ONE is supported, remove the choice entirely.
BINFMT_FLAT_SEP_DATA was removed in 2018 from Buildroot by commit:
e2ea4157a9
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
latest kernel LTS (6.6.x) is facing problems with the sdcard
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The rock5b_defconfig contained a
# BR2_LINUX_KERNEL_INTREE_DTS_NAME is not set
line. This caused check-dotconfig.py to throw a warning in the
buildroot CI, because the explicit unsetting of the parameter is not
taken on in the actual dotconfig, but instead the dotconfig will
contain the line 'BR2_LINUX_KERNEL_INTREE_DTS_NAME=""'.
This patch removes the parameter from the rock5b_defconfig. The
resulting dotconfig from the original rock5b_defconfig and the
rock5b_defconfig without the parameter is identical, but the
check-dotconfig.py does not throw a warning anymore.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for BeagleBone AI-64 board by introducing the
beagleboneai64_defconfig file and related support files.
The BeagleBone AI-64 uses the TI J721E SoC, also known as DRA829, also
known as TDA4VM.
Retrieve BSP settings from meta-ti (may be useful for other TI boards):
- This defconfig requires u-boot binman support added in u-boot since
2023.10.
See FOSDEM 2024 talk by TI folks about Binman and how it simplify
the overall boot-loader build flow [1].
- Set BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD = "generic"
meta-ti]$ git grep TFA_BOARD
meta-ti-bsp/conf/machine/beagleplay.conf:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am62axx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am62pxx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am62xx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am64xx.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/am65xx.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j7200.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j721e.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j721s2.inc:TFA_BOARD = "generic"
meta-ti-bsp/conf/machine/include/j722s.inc:TFA_BOARD = "lite"
meta-ti-bsp/conf/machine/include/j784s4.inc:TFA_BOARD = "j784s4"
- Set BR2_TARGET_UBOOT_NEEDS_ATF_BL31 to provide BL31 variable pointing
to ATF bl31.bin to the U-Boot build process [2].
- Set BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE to OP-TEE as BL32
secure payload. meta-ti set "SPD=opteed" to build ATF [3].
- Set BR2_TARGET_OPTEE_OS_PLATFORM to "k3-j721e".
meta-ti uses the OPTEEMACHINE to set optee-os platform [4].
meta-ti]$ git grep OPTEEMACHINE
meta-ti-bsp/conf/machine/am437x-hs-evm.conf:OPTEEMACHINE = "ti-am43xx"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf:OPTEEMACHINE = "ti-am57xx"
meta-ti-bsp/conf/machine/beagleplay.conf:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf:OPTEEMACHINE = "ti-dra7xx"
meta-ti-bsp/conf/machine/include/am62axx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62pxx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am62xx.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/am64xx.inc:OPTEEMACHINE = "k3-am64x"
meta-ti-bsp/conf/machine/include/am65xx.inc:OPTEEMACHINE = "k3-am65x"
meta-ti-bsp/conf/machine/include/j7200.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721e.inc:OPTEEMACHINE = "k3-j721e"
meta-ti-bsp/conf/machine/include/j721s2.inc:OPTEEMACHINE = "k3-j784s4"
meta-ti-bsp/conf/machine/include/j722s.inc:OPTEEMACHINE = "k3-am62x"
meta-ti-bsp/conf/machine/include/j784s4.inc:OPTEEMACHINE = "k3-j784s4"
- Use j721e_beagleboneai64_a72 and j721e_beagleboneai64_r5 u-boot
defconfigs introduced in u-boot v2024.04.
- u-boot distroboot (bootflow) detect extlinux.conf file from the first
SDcard partition, se we have to install the kernel and its dtb file.
Use devicetreedir instead of devicetree in extlinux.conf file to
avoid hardcoding the devicetree file name. TI boards are able to
retrieve dtb file name from an EEPROM (see TI_I2C_BOARD_DETECT in
uboot).
- Provide a hash file for all custom package version
(arm-trusted-firmware, linux, ti-k3-r5-loader, uboot) to enable
BR2_DOWNLOAD_FORCE_CHECK_HASHES.
[1] https://fosdem.org/2024/schedule/event/fosdem-2024-3067-standardizing-the-generation-and-signing-of-boot-images/
[2] https://git.yoctoproject.org/meta-ti/commit/?id=e74b9a1746d4d04757c87c1920a0f743e55ff096
[3] https://git.yoctoproject.org/meta-ti/tree/meta-ti-bsp/recipes-bsp/trusted-firmware-a/trusted-firmware-a-ti.inc?h=09.02.00.004#n7
[4] https://git.yoctoproject.org/meta-arm/tree/meta-arm/recipes-security/optee/optee-os.inc?h=4.0.3#n23
More information about the board can be found at:
https://www.beagleboard.org/boards/beaglebone-ai-64
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OpenSBI to v1.4 and Kernel to v6.6.26.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- With uClibc-ng-1.0.48 we can restore this defconfig because uClibc-ng
now provides the fix for SPARC.
- The instructions in board/qemu/sparc-ss10/readme.txt are still valid
without any corrections. The system boots properly ang the login
prompt appears.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest kernel to pull in the latest bug fixes and features
for TI's SoCs and reference boards
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest kernel to pull in the latest bug fixes and features
for TI's SoCs and reference boards
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the TFA firmware to the latest LTS tag for v2.10 release of
arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the TFA firmware to the latest LTS tag for v2.10 release of
arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds basic support for the new OrangePi Zero2W board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2W.html
Brief summary of the board features:
- H618 Allwinner SoC
- Quad-Core ARM Cortex-A53 Processor 1.5GHz
- Mali G31 MP2 GPU
- LPDDR4: 1GB/2GB/4GB
- Wi-Fi5.0+BT 5.0
- 2x Type-C USB 2.0
- 1x Mini HDMI
- Wi-Fi 5.0 + BT 5.0
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM)
- 24-pin expansion interface (2x USB 2.0 / ETH / IR / audio)
BSP includes the following components:
- mainline ATF v2.10
- mainline U-Boot v2024.04
- mainline Linux kernel v6.8
No custom scripts required: all is covered by common orangepi scripts.
However new option BR2_DOWNLOAD_FORCE_CHECK_HASHES requires checksums
for all the BSP components. They are added as board specific patches.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Generated by utils/add-custom-hashes, with the (redundant)
linux-headers.hash replaced by a symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6761770801
The Linux kernel fails to build since commit e88225ed88 (package/binutils:
make 2.41 the default version):
arch/arm/mm/proc-feroceon.S: Assembler messages:
arch/arm/mm/proc-feroceon.S:587: Error: junk at end of line, first unrecognized character is `#'
make[3]: *** [scripts/Makefile.build:430: arch/arm/mm/proc-feroceon.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Fix the build by bumping the kernel to 4.14.336, which includes commit
3ab03df64f77 (ARM: 8933/1: replace Sun/Solaris style flag on section
directive):
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.14.y&id=3ab03df64f7754728a2257c47775a70a88428331
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested by Arnout during the review [1], we can assume that U-Boot
needs ti-k3-boot-firmware when it is selected (likely by
ti-k3-r5-loader).
We can remove BR2_TARGET_UBOOT_NEEDS_TI_K3_BOOT_FIRMWARE without
legacy handling since this option is not part of any Buildroot
release.
[1] http://lists.busybox.net/pipermail/buildroot/2024-April/689263.html
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As asked by Romain. Armadeus boards share same Linux hashes.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES. As asked By Romain.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch doesn't introduce any functional changes but reorganizes the
code to prevent the execution of the commands:
make ti_am62x_sk_defconfig
make savedefconfig
from showing a change in the defconfig.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Gero Schwäricke <gero.schwaericke@grandcentrix.net>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Wireless regulatory database lists the allowed radio frequencies for
each local jurisdiction. Since linux-4.15 the kernel supports loading
the files regulatory.db/regulatory.db.p7s directly from the
/lib/firmware directory. Currently this package is not enabled and
kernel complains with the following message on every boot:
"""
platform regulatory.0: Direct firmware load for regulatory.db failed
with error -2
cfg80211: failed to load regulatory.db
"""
Add wireless regulatory database package to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new defconfig for the Star64 board made by
Pine64. This board is based on the Starfive JH7110 RISC-V 64 bits
SoC. See: https://wiki.pine64.org/wiki/STAR64.
This patch uses a custom Kernel and U-Boot made for this board. The
SPL has to be signed with the Starfive SPL-Tool which is a software
provided by the vendor to get the necessary headers on the SPL.
The image configuration is based on the work done by Ivan Velickovic
<i.velickovic@unsw.edu.au>.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
