The <tuple>/lib* symlinking added by 3c77bab2ee needs to
be moved up to the gcc-intermediate step now the NPTL stuff is merged,
otherwise 64bit builds fails (lib64 already created).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5575d205c (toolchain: remove multilib) we were no longer passing
--disable-multilib, which broke builds for multilib-capable archs (like
x86-64, ppc, ..).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The iconv library can only be present when locale are disabled in the
toolchain. When locale are enabled in the toolchain, iconv is directly
implemented by the C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ./configure script of libcurl includes <arpa_inet.h> instead of
<arpa/inet.h> when testing for inet_pton(). The test fails, but it
doesn't prevent libcurl to build as it can work without inet_pton().
However, it fills the configure cache with the fact that inet_pton()
does not exist. And later, tcpreplay reads this from the configure
cache and fails to build, because tcpreplay really need inet_pton().
Unfortunately, just fixing the .m4 file doesn't work because the
autoreconfiguration of the package fails. Since the fix for this
problem is already upstream, the easiest solution is therefore to bump
libcurl.
The libcurl-7.19.2-fix-ssl-no-verbose.patch patch is no longer needed.
Since we're patching a m4 file, we must autoreconfigure the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It fails to build with:
ctype_members.cc: In constructor 'std::ctype_byname<_CharT>::ctype_byname(const char*, size_t) [with _CharT = char]':
ctype_members.cc:59: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
ctype_members.cc:60: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
ctype_members.cc:61: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
make[5]: *** [ctype_members.lo] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As soon as PostScript, PNG or SVG support is enabled, PDF support is
required for Cairo to build properly. Otherwise, you get build
failures such as:
.libs/cairo-type3-glyph-surface.o: In function `_cairo_type3_glyph_surface_set_stream':
/home/thomas/local/buildroot-dl/cairo-1.8.10/src/cairo-type3-glyph-surface.c:337: undefined reference to `_cairo_pdf_operators_set_stream'
/home/thomas/local/buildroot-dl/cairo-1.8.10/src/cairo-type3-glyph-surface.c:337: undefined reference to `_cairo_pdf_operators_set_stream'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just as we do for U-Boot, error out in the Linux kernel makefile when
the defconfig name or the configuration file path are not
correct. What prompted me to implement this was a report on IRC from
an user using BR 2010.05 and not understand why the kernel build
process was failing. It was because he just forgot to set the path of
the configuration file.
Of course, it doesn't catch all mistakes (like pointing to a
non-existing defconfig or to a non-existing configuration file), but
it at least catches basic mistakes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When U-Boot is enabled and no custom patch directory has been set,
then the current test:
ifneq ($(strip $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),"")
works. However, when U-Boot is not enabled, but still gets compiled
because mkimage is needed to build the kernel,
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR is completely empty. It does not
even have quotes. So the test in fact needs to be:
ifneq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When SWAT (the Web administration tool of Samba) is enabled, which is
the default when one enables samba in Buildroot, a lot of
documentation gets installed in /usr/swat (~15 MB). This patch fixes
this by removing the documentation when BR2_HAVE_DOCUMENTATION is not
set.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream version of speech-tools does not build with GCC >= 4.3,
mainly due to changes in how C++ headers are included. This is fixed
in Debian, so let's use the Debian version and patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is needed to avoid:
/home/test/mips-4.4/bin/mips-linux-gnu-ld --sysroot=/home/test/outputs/test-35/staging -shared --whole-archive -soname libdmallocxx.so -o libdmallocxx.so.t libdmallocxx.a
/home/test/mips-4.4/bin/mips-linux-gnu-ld: libdmalloc.a(arg_check.o): relocation R_MIPS_HI16 against `_dmalloc_flags' can not be used when making a shared object; recompile with -fPIC
It is fixed through a patch to Makefile.in instead of passing a CFLAGS
variable to ./configure environment in order to avoid cluttering the
configuration cache with incorrect values.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also make the cpu counting routine more reliable (for ARM it's
"Processor" in cpuinfo rather than "processor").
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch modifies current toolchain build sequence so that
NPTL enabled toolchain can be built. The new sequence works
well with linuxthreads as well.
It introduces a new pass for gcc cross compilation. The new
sequence is binutils->gcc-initial->linux-headers -> uclibc-configured
(some cheats to generate phony shared libc.so and libm.o)
-> gcc-intermediate(with shared lib support) -> uclibc -> gcc-final
I also added a new sample config arm_nptl_toolchain_defconfig which
builds the toolchain and busybox.
I have only tried it on arm. However it should work for other
architectures which support NPTL on uclibc e.g. mips, sh, x86, ppc, x86_64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the reorganization of the variables in package/Makefile.in,
TARGET_CC and TARGET_CXX now directly contain the --sysroot= option in
addition to the compiler path. This is due to some ./configure scripts
using just $(TARGET_CC) for some tests instead of $(TARGET_CC)
$(TARGET_CFLAGS).
However, in the case of CMake, this fails as CMake really only wants
the path of the compiler in its CMAKE_C_COMPILER and
CMAKE_CXX_COMPILER variables. So here, we recompute proper values for
CMake by removing the --sysroot option from the compiler variables and
re-adding it to the flags variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libeXosip fails to use pkg-config to find libosip, it defaults to
thinking that libosip is installed in $(prefix)/lib and
$(prefix)/include, which is of course wrong. There was an attempt to
fix this by passing OSIP_CFLAGS and OSIP_LIBS variables to libeXosip
./configure script, but it still does not work:
checking pkg-config is at least version 0.9.0... ./configure: line 21035: /home/test/outputs/test-41/host/usr/bin/pkg-config: No such file or directory
no
checking for OSIP... configure: WARNING: assuming osip can be found in -I${prefix}/include and -L${exec_prefix}/lib
Therefore, the correct fix is to depend on host-pkg-config.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This error should never show up if all Buildroot dependencies are
correct. However, rather than failing horribly later on, catch this
particular case early on and error out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All "select BR2_PACKAGE_LIBICONV" must use the "if !BR2_ENABLE_LOCALE"
condition, otherwise we can end up with a toolchain suppoting locales
*and* the libiconv package being compiled, which confuses other
packages. Example with glib:
gconvert.c:52:2: error: #error GNU libiconv in use but included
iconv.h not from libiconv
In addition to that, in xerces.mk, we add the dependency on libiconv
when it is available, to make sure it gets compiled before xerces.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cross-gdb is supposed to be part of the external toolchain, so
Buildroot does not need to build it. Moreover, GDB_HOST build
currently fail with:
ln -snf ../../bin/arm-unknown-linux-gnueabi-gdb \
/home/test/outputs/test-48/staging/usr/arm-unknown-linux-gnueabi/bin/gdb
ln: creating symbolic link `/home/test/outputs/test-48/staging/usr/arm-unknown-linux-gnueabi/bin/gdb': No such file or directory
And even worse: they overwrite the cross-gdb of the external
toolchain!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current computation of REAL_GNU_TARGET_NAME is incorrect for
non-ARM glibc platforms because it generates something such as
mipsel-unknown-linux- as the REAL_GNU_TARGET_NAME.
So we correct this by :
* Adding "gnu" in the suffix when glibc is used, so that in the
previous case we will have mipsel-unknown-linux-gnu
* Improving the ARM_EABI code to correctly append "eabi" when glibc
is selected, so that we have arm-unknown-linux-gnueabi, and to
append "gnueabi" when uclibc is selected, so that we have
arm-unknown-linux-uclibcgnueabi. The little trick here is that LIBC
and ABI aren't completely orthogonal on ARM.
This fixes problems such as :
checking host system type... Invalid configuration
`mipsel-unknown-linux-': machine `mipsel-unknown-linux' not recognized
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
oprofile depends on binutils_target, but binutils_target fails to
build with external toolchains because the binutils version has not
been choosen. As the fix is not trivial, let's just disable oprofile
in external toolchain builds for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that two packages (tremor and libsvgtiny) are being downloaded
from svn, svn becomes a mandatory tool to run Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The netsnmp package should depend on openssl when using it.
Otherwise netsnmp might get built before openssl and poison the
configure cache since it's not a mandatory dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Supporting multilib is much more than just passing --enable-multilib
to gcc. You have to actually build the C library several times (once
for each multilib variant you want to support in your toolchain), and
to pass MULTILIB_OPTIONS/MULTILIB_EXCEPTIONS values to gcc to let it
know the set of multilib variants you're interested in.
Since we'll probably never support multilib toolchains in Buildroot,
just get rid of this BR2_ENABLE_MULTILIB option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a very advanced option, and it seems, according to
http://choices.cs.uiuc.edu/exceptions.pdf that SJLJ exceptions aren't
really interesting.
Users really interested by this can always use the
BR2_EXTRA_GCC_CONFIG_OPTIONS is they want.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Handle the internal toolchain backend mechanism the
same way we handle other backends.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Including a bunch of Makefiles with wildcard makes it impossible to add
new toolchain backends. Avoid that by namely including needed files.
The external toolchain still needs to include all the toolchain/*/*.mk
sub-makefiles, as they are needed to build a toolchain that runs on the
target. It is to be noted that the cross-toolchain is not built in this
case, as the make-targets to build the cross-toolchain are not present
in the $(BASE_TARGETS) variable, which is later used to create the
dependency rules.
Also, the comment 'Explicit ordering' has been removed, as it is mis-
leading. It is make's responsibility to create the proper ordering based
on the dependency rules it finds in the Makefiles
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Rename the external toolchain directory.
When new backends are here, it will be easier to sort them out
if they are all prefixed the same way.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The helper functions used for external toolchains may also be useful
to alternate toolchain backends (currently, the external toolchain is
the sole user).
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgtk2 on DirectFB is deprecated because it is no longer supported in
recent versions of Gtk. We will remove support for Gtk over DirectFB
in the next Buildroot version unless support for DirectFB in mainline
Gtk is improved in the mean time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those architectures don't exist anymore (Alpha, IA64) or aren't widely
used for embedded systems running Linux. Moreover, no clear Buildroot
maintainer has stepped in to maintain these architectures, so it's
better to not pretend that we support them.
The goal is to mark them as deprecated in 2010.08 and remove them in
2010.11.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option is already part of the gcc configure options through the
BR2_CONFIGURE_BUILD_TOOLS variable (in toolchain/Makefile.in).
Additionnally, the value that was passed in the AVR32 specific case
was incorrect: it was $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin
instead of $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
